The Cryptkeeper
Well-Known Member
Well ya do realize it's a rough extraction don't you. lol Not like you're going to get EVERY last cannabinoid in there, right?only 3 per oz? wow im dissapointed if i dont get at Least 5.
Well ya do realize it's a rough extraction don't you. lol Not like you're going to get EVERY last cannabinoid in there, right?only 3 per oz? wow im dissapointed if i dont get at Least 5.
What do you do with the buds that come out of the extractor?Well ya do realize it's a rough extraction don't you. lol Not like you're going to get EVERY last cannabinoid in there, right?
If your extraction went well, they're just odorless green stuff. Mine goes down the drain or into the lawn. cnWhat do you do with the buds that come out of the extractor?
Thats what I thought, but I wasnt sure if making BHO extracted every last bit or I should throw it in the crock pot for some cannabutter or what? I mean it still looks like ground up bud, not as smelly or sticky obviously. Thanks for anwsering all my questions this is all new to me lol. Last week I had no clue what concentrates were.. now im about to take a dab =DIf your extraction went well, they're just odorless green stuff. Mine goes down the drain or into the lawn. cn
i take my filter off the end of my tube, hold it from the opposite end and swing it downward. all the frozen trim flies out in a line down my driveway. then i light it on fire.What do you do with the buds that come out of the extractor?
You toss them.What do you do with the buds that come out of the extractor?
i take my filter off the end of my tube, hold it from the opposite end and swing it downward. all the frozen trim flies out in a line down my driveway. then i light it on fire.
comon now homie! every vac pump has one, u msut of been really stoned when u wrote this lolol! the big black knob on the top is the exhaust on my vac!
gnome grown... do you have a vapor discharge port on your electric pump? It looks like everythings closed up..
I was using mine the other day, again, and after about 5 minutes of running, when I tried to equalize the pressure ---- the oil from inside the vacuum pump started to travel back out into my vacuum chamber...... though this time it didnt come out the lines more than a little mL... and my oil was unaffected
I'm wondering WHY the oil travels back up the line? I have it all hooked up correctly... Is my pump overheating, or is it faulty ...
I'm wondering if I should get what your using! Mine cost $150 though
Faded you can get in on this too, I've seen you with a pump hooked up....
My experience with electric pumps has been less than fun. I'm wondering if I'm doing something wrong Maybe I should have the chamber elevated a few feet above my vacuum pump, so the vacuum pump oil doesn't back up into the chamber when I equalize.... But I feel as though I shouldn't need to do that!!
LOL You're a funny man but absolutely right.ok so i came in this thread a little late so i just took a little time to go over it and a lot of what u all say made me lol!
im not here to take any sides. i love my errls and if u dont its fine cause ur not dabbin it anyways..
with that said, u ALL need to stop haten on each other! this should be a thread for the errl movement! not where we come and bash on eachothers methods!..
im not pointing fingers at anyone so please dont take this the wrong way! but if ur not dabbin on someones errl dont sit there and bash it calling it flakey,or dusty, or it has too much butane and blah blah blah, why dont we all try to help instead!
like "hey man did u pruge that run, looks like theres still tane in that errl" but no most cocky fucks are like "ewwww that errl is gross man how that tane" lolol.
im kinda dabbed out rite now, so im ranting, deal with it or stop reading. lol
Verde- i beat that cultivation charge today, im a free man!
ok so i came in this thread a little late so i just took a little time to go over it and a lot of what u all say made me lol!
im not here to take any sides. i love my errls and if u dont its fine cause ur not dabbin it anyways..
with that said, u ALL need to stop haten on each other! this should be a thread for the errl movement! not where we come and bash on eachothers methods!..
im not pointing fingers at anyone so please dont take this the wrong way! but if ur not dabbin on someones errl dont sit there and bash it calling it flakey,or dusty, or it has too much butane and blah blah blah, why dont we all try to help instead!
like "hey man did u pruge that run, looks like theres still tane in that errl" but no most cocky fucks are like "ewwww that errl is gross man how that tane" lolol.
im kinda dabbed out rite now, so im ranting, deal with it or stop reading. lol
Verde- i beat that cultivation charge today, im a free man!
I thought every vac had one which is why I was wondering why yours was cappedcomon now homie! every vac pump has one, u msut of been really stoned when u wrote this lolol! the big black knob on the top is the exhaust on my vac!
ur vac is still doing that bullshit huh? ive never heard of the oil coming back up the line happen to anyone! maybe u have too much oil in ur pump? or like u said,u could be over heating it..oil gets thin when its warmed up!..idk man either way i dont think that should happen! how long r u running ur vac for?..my erl goes in and out from the oven at 150 degrees to the vac for about 2 min. i do this multiple times,untill the errl stops reacting in the vac!
oil shouldnt do anything to rubber. jsut rinse ur lines out real good!..the over flow back into ur chamber is gnarly dude! i over filled my vac when i first bought it and all it did is blow more exhaust vapors out, never came up my line!...it doesnt even make sence to me dude! is it flowing up while ur vaccing? cause that line should ALWAYS be sucking air not pushing oil up it lol. r u leavein ur chamber under vac pressure after ur turn ur vac pump off?!? cause if u are it only makes sence that the chamber is pulling air back into it with oil straight out of ur vac!..once u turn off ur vac disconnect the lines and release the pressure rite away! i never let my chamber sit under pressure!..hope this helps dude cause thats some shitty shit! lolI thought every vac had one which is why I was wondering why yours was capped
My oil fill line is at low... I run it for 2 min.. turn it off, run it for 2 more min... off.. run it for a another go and hear BuBbling like boiling and see oil running into the resivor in my chamber...
Why's it doing that? Mines hooked up like yours.
Btw any idea if vacuum oil is corrosive to rubber? I'm wondering if I should replace my lines again
hot plate?..that doesnt get all the butane out imo. i used to purge the same way before i got a vac and theres a HUGE noticable difference in the errl!kitchen plate warmer purge!
The less you whip the higher you get? Also? Taste is good too though.yah dude i honestly dont think u get all the tane our unless u use a vac. but thats just imo. as far as taste. everytime u whip ur errl ur fucking with the terps and thats were most of the taste is!..try to introduce the heat a lil slower so it doesnt budder so fast and the less whipping the better!. the less u fuck with the terps the better it taste!