1st from Seed Grow (Cowboy Style)

Bobotrank

Well-Known Member
Mornin' Donald! I like that last update... sans mould, of course (fukin' shyt!). It's lookin' dank over there tho.

So you say you've got your humidity down under 40%? Man, I could never get my tent that low (unless I did like you with my dehu, which just won't work for the stinky tent setup as it is right this moment). I'll dip in to the 50's, but that's about it... normally I hover around 60%. Where is humidity normally the best? Around 40%? I feel I've been very lucky to not be slammed with mould, or something of the sort. Dammit. Now I've gone and done it... ::touching wood::

Well, doesn't look like it brought you down too low... and plus, poodles are smart, right? Yours looks well primped ;) Later!
 

tip top toker

Well-Known Member
I've got it hooked to the plastic stud thing, have followed all instructions to the T, tried different aquavalves. My new problem is that the tube connecting the res to the manifold leaks, i've tried a worm driver clip, no use, gonna have to pop into the attick to see if i've any spare PTFE tape lying around but don't see how that will easily be appleid with a tight fitting push fit barb. Pretty much on the verge of saying sod it and sending the lot back. Nowt but trouble.
 

Highlanders cave

Well-Known Member
Mornin' Donald! I like that last update... sans mould, of course (fukin' shyt!). It's lookin' dank over there tho.

So you say you've got your humidity down under 40%? Man, I could never get my tent that low (unless I did like you with my dehu, which just won't work for the stinky tent setup as it is right this moment). I'll dip in to the 50's, but that's about it... normally I hover around 60%. Where is humidity normally the best? Around 40%? I feel I've been very lucky to not be slammed with mould, or something of the sort. Dammit. Now I've gone and done it... ::touching wood::

Well, doesn't look like it brought you down too low... and plus, poodles are smart, right? Yours looks well primped ;) Later!
Ideal flowering humidity levels, according to Cevantes is like in the 20s and 30s (helps with adding trics when its that low). In the summer and even still if I did not run my dehumidifier it would be in the 70s and running it I can keep it in the mid 40s to about 60. Depends where I want the ambient temps in there to be. Plenty of times it's been way to humid in there and I only just recently had a bit of mold on one bud.

Hope this helps a little bobo
 

rasclot

Well-Known Member
smokin a nice fat1 of smelly cherry all day turns u into a zombie n gives u red eye big time love it!!!!!! thanx don daddy!!
 

the uk greek

Active Member
I've got it hooked to the plastic stud thing, have followed all instructions to the T, tried different aquavalves. My new problem is that the tube connecting the res to the manifold leaks, i've tried a worm driver clip, no use, gonna have to pop into the attick to see if i've any spare PTFE tape lying around but don't see how that will easily be appleid with a tight fitting push fit barb. Pretty much on the verge of saying sod it and sending the lot back. Nowt but trouble.
I had to order some rubber gromits to fit the tube into the res, mine didnt come with any. I've got some spare if you want one?
 

tip top toker

Well-Known Member
I had to order some rubber gromits to fit the tube into the res, mine didnt come with any. I've got some spare if you want one?
They didn't have the res i was after in stock, so i've bene left with a 100L job with a big 1/2" ID tube leading from the res to a 10 port adapter, the 1/2" tube leaks at the adapter. Stupid load of rubbish :( why couldn't they have ust sent me what i ordered.
 

the uk greek

Active Member
They didn't have the res i was after in stock, so i've bene left with a 100L job with a big 1/2" ID tube leading from the res to a 10 port adapter, the 1/2" tube leaks at the adapter. Stupid load of rubbish :( why couldn't they have ust sent me what i ordered.
Ah what a bastard, bunch of fuck wits. To be honest I'm in 2 minds whether to stop using mine for a little to fit an extra girl in there.
 

Hemlock

Well-Known Member
heyyy is there any purple in ur BSB x CB? i know mines got a nice shade of purple to it.. adn so doeswnt C-Love. jsut curious if any1 elses is purple? looks great tho man!

HEy chb, no not yet, doesn't seem to be far enough along. but I am hoping for a bit of purple.

Hey what do ya'll think about Black Rose male and a Sensi Star Female... call it Black Star???
 

Don Gin and Ton

Well-Known Member
Mornin' Donald! I like that last update... sans mould, of course (fukin' shyt!). It's lookin' dank over there tho.
So you say you've got your humidity down under 40%? Man, I could never get my tent that low (unless I did like you with my dehu, which just won't work for the stinky tent setup as it is right this moment). I'll dip in to the 50's, but that's about it... normally I hover around 60%. Where is humidity normally the best? Around 40%? I feel I've been very lucky to not be slammed with mould, or something of the sort. Dammit. Now I've gone and done it... ::touching wood::
Well, doesn't look like it brought you down too low... and plus, poodles are smart, right? Yours looks well primped ;) Later!
hey bobro! yeah it's not so much the humidity thats the issue well it is but the density of the plants. vegging them in the autopots is the only thing i've done differently. they've grown really bushy. more bushy than usual for livers and psycho. the internode space is so small they've basically just bushed up instead of grown vertically whereas the DOG's have grown normally. they were transplanted into the auto's a week or so before flowering. i'm gutted really they had extra veg time as they grew so slowly vertically. and now i'm losing the fucking stuff to mold :( found a load more this morning. did a load of pruning and staking to try and up the airflow. added another fan opened the window a touch to let more fresh air through. but if i keep losing more n more i'll just take them early. i could cry it's such a fuckin pain.
I've got it hooked to the plastic stud thing, have followed all instructions to the T, tried different aquavalves. My new problem is that the tube connecting the res to the manifold leaks, i've tried a worm driver clip, no use, gonna have to pop into the attick to see if i've any spare PTFE tape lying around but don't see how that will easily be appleid with a tight fitting push fit barb. Pretty much on the verge of saying sod it and sending the lot back. Nowt but trouble.
TTT, send the 100l res back and tell them to order the one you want. use the pots as normal pots till the replacement arrives.
weird though, if they're moored to the plastic stud and the arm of the valve isnt obstructed they should close off when the little res in the pot fills up.
Ideal flowering humidity levels, according to Cevantes is like in the 20s and 30s (helps with adding trics when its that low). In the summer and even still if I did not run my dehumidifier it would be in the 70s and running it I can keep it in the mid 40s to about 60. Depends where I want the ambient temps in there to be. Plenty of times it's been way to humid in there and I only just recently had a bit of mold on one bud.
i normally add the dehumidifer for the last couple of weeks to swell the trichs. i'm seriously looking forward to just starting over. this run has done my head in.
smokin a nice fat1 of smelly cherry all day turns u into a zombie n gives u red eye big time love it!!!!!! thanx don daddy!!
oh yeah we have foxtails growin on the smelly cherry at 9weeks in shall i leave em a bit longer?
nice one man glad you like it! as for leaving it past 9, that's up to you man!
They didn't have the res i was after in stock, so i've bene left with a 100L job with a big 1/2" ID tube leading from the res to a 10 port adapter, the 1/2" tube leaks at the adapter. Stupid load of rubbish :( why couldn't they have ust sent me what i ordered.
dont tell me you got em from basement shiting??? send it back man. these autopots have enough issues without adding leaky connectors to the mix.
heyyy is there any purple in ur BSB x CB? i know mines got a nice shade of purple to it.. adn so doeswnt C-Love. jsut curious if any1 elses is purple? looks great tho man!
HEy chb, no not yet, doesn't seem to be far enough along. but I am hoping for a bit of purple.
Hey what do ya'll think about Black Rose male and a Sensi Star Female... call it Black Star???
black star sounds pretty awesome man. both are sure fire winners.


i'm gutted, what with the mold and the bushyness of the girls i reckon i've lost at least half a dozen ounces
 

Highlanders cave

Well-Known Member
"i'm gutted, what with the mold and the bushyness of the girls i reckon i've lost at least half a dozen ounces"

Oh man real sorry to hear it, that's a big loss
 

Don Gin and Ton

Well-Known Member
yeah man, not as sorry as i am believe me. :( worse things happen at sea................ apparently. at least i haven't got cracken's to deal with in the grow tent...

it's not like i'm not going to have a good amount i just hate not seeing it to it's full potential
 

Highlanders cave

Well-Known Member
That's a lot of dough. Cold and dark and rainy here. Love it haha...need to run up to the store now though....no cream for my coffee. Lifes a bitch ;)

Stay up man, talk to you later
 

cheddar1985

Well-Known Member
Shit bro wounded aint the word for it !! I ve neva had mould myself but my buddy has and to look at it i could of cried but shit happens and u make sure it nrva happens again!! Could u of done anythin diffrent to make sure it did nt happen? Bigger extraxtor, less run off, lower temps ect ect like i say mate gutted for u a thousand pound is a lot of money in this day and age!!
 

Don Gin and Ton

Well-Known Member
Hey Don what's good in the garden. I saw the pics nice buds suck for the problem. I'm sure you'll have that fixed
ah man, at the moment the QQ and the DOGs are going for it the rest could be better. the half dozen kush are looking good. i'm seriously contemplating taking the 2 mold affected ones out and letting the kush have the spot under the 600. but i'm not sure. theyll have a 600 to themselves in a couple of weeks anyway. so idk. thanks for dropping in man.
Shit bro wounded aint the word for it !! I ve neva had mould myself but my buddy has and to look at it i could of cried but shit happens and u make sure it nrva happens again!! Could u of done anythin diffrent to make sure it did nt happen? Bigger extraxtor, less run off, lower temps ect ect like i say mate gutted for u a thousand pound is a lot of money in this day and age!!
aye deffo gutted about it but it's a learning curve as always it's just a bit steep lol. i reckon vegging without being hooked up to the reservoirs, they'd have been fine. though i know oscar oscar veg's using the res' without probs but he used different nutes. a bigger extractor haha that would be a 12" the 10" is loud enough. and deffo draws enough cfm through it.

a bag of sand is a lot to lose but at this stage there's nowt i can do really.
 

the uk greek

Active Member
It might be worth just pulling her mate, you dont want it to spread anymore and you've still got shitloads in there, but you know better than me my friend and I'm sure you'll make the right choice.

On another note got somemore free nutes through in the last few days, got some from Plagron, Green Planet and Hesi to add to the Plantlife (Future Harvest Development) and the Aptus ones.
 

Don Gin and Ton

Well-Known Member
hahaha shit man you'll have enough to start your own hydro store soon.

i know it might be worth it but they're just starting to swell :( ah fuck knows i'm going to see how they fare this weekend. maybe take one and see. could use the cash too. stag do to go to n all that. got to have party treats
 

the uk greek

Active Member
hahaha shit man you'll have enough to start your own hydro store soon.

i know it might be worth it but they're just starting to swell :( ah fuck knows i'm going to see how they fare this weekend. maybe take one and see. could use the cash too. stag do to go to n all that. got to have party treats
Do you have another light? Maybe you could move the effected ones elsewhere while still keeping them 12/12.

should be a good party ;)
 
Top