Hempy FEEDING ec ppms and ph - kind of nutes? Succesful Schedule?

M

Maleficarum

Member
I apparently through dumb luck had one good hempy grow. But my new hempy grow is falling apart. I've searched and looked on here about hempy info and there seems to be a shit TON of info. But... there's never any info on the right PPMS for hempy or feed schedule i.e. feed light every feeding or... feed normal, water, feed, water and so on.

Is there any HEMPY experts out there that have any definitive input on this? Or a link that actually takes me to HEMPY PPM & FEED SCHEDULE? Because the hempy for dummies doesn't have crap on this (which to me would seem like) most important issue.

Some say they have their hempys at 1200ppm (with small plants)
Others say never go over 500ppm no matter what size or you'll get lockout/nute burn.
Some say keep it at 6.0ph others 5.6ph.
Some say feed, water, water
Some feed every time with 300ppm no matter what size....

Is there anyone that can confirm any of the above? Especially PPMs? And or call BS or point me toward a link I cannot seem to find? Cause all the "drill a hole in a bucket" hempy threads really aren't helping.

There needs to be a master hempy NUTE thread. Please... point me to it.
You got 4 footers in 5 gal buckets? You shouldnt be over XXXX ppm.
You just flipped 2 footers in 3 gals? Dont go over XXXX ppm.
AN Conniseur? Its really strong and can be disastrous in Hempy.
XXX XXX XXX XXX and XXX nute brands work great in hempy etc.



A collection of shit like that ^^^^^



Thanks. If anyone has the magic info or link thanks. I'm sort of bongsmilie atm... hope this made sense.
 
M

mrderp

Member
Maleficarum said:
I apparently through dumb luck had one good hempy grow. But my new hempy grow is falling apart. I've searched and looked on here about hempy info and there seems to be a shit TON of info. But... there's never any info on the right PPMS for hempy or feed schedule i.e. feed light every feeding or... feed normal, water, feed, water and so on.

Is there any HEMPY experts out there that have any definitive input on this? Or a link that actually takes me to HEMPY PPM & FEED SCHEDULE? Because the hempy for dummies doesn't have crap on this (which to me would seem like) most important issue.

Some say they have their hempys at 1200ppm (with small plants)
Others say never go over 500ppm no matter what size or you'll get lockout/nute burn.
Some say keep it at 6.0ph others 5.6ph.
Some say feed, water, water
Some feed every time with 300ppm no matter what size....

Is there anyone that can confirm any of the above? Especially PPMs? And or call BS or point me toward a link I cannot seem to find? Cause all the "drill a hole in a bucket" hempy threads really aren't helping.

There needs to be a master hempy NUTE thread. Please... point me to it.
You got 4 footers in 5 gal buckets? You shouldnt be over XXXX ppm.
You just flipped 2 footers in 3 gals? Dont go over XXXX ppm.
AN Conniseur? Its really strong and can be disastrous in Hempy.
XXX XXX XXX XXX and XXX nute brands work great in hempy etc.



A collection of shit like that ^^^^^



Thanks. If anyone has the magic info or link thanks. I'm sort of bongsmilie atm... hope this made sense.
Click to expand...



Sorry if this is quite late, im not really on these forums much. but in my experience with all perlite jempys that im running atm.
My 2 week old is on 860PPM as my tap waters 224ppm the rest is nutes. Ph is 6.0. Never saw problems at all.
Theres no nute burn, and i feed every time, except on weekends i use plain ph 6 water to get rid of salt build ups causing some burning.
( read on another forum for testing run off ppms and looking at what there coming out at, if its high its a salt build up apparently )
I have fed nutes from the day it was put into the hempy, about 3 days in soil. then straight to solo cup hempy. ( 1/5 str nutes to beguin with. )

Im no expert but its doing fine for me.
 
You must log in or register to reply here.
Top