I think I will get into hydro soon. When I do I'm gonna do something like this. It sounds like what your looking for also.
Stinkbud's Aero
Stinkbud's Aero
aeroponics system needed that only uses ez-clone neoprene inserts for medium?
- Thread starter tree king
- Start date
thanks for the link BudDub but that thread is way too long for me to read. 500 pages lol
WillyBagseed
Active Member
Make your own flower system, can be done in a day and costs maybe $150 for a 10-14 site.
http://www.stinkbuddies.com/
This is the original build, go to forums there to get much better modified ideas
http://www.stinkbuddies.com/pdfs/StinkBud_Sr02_1.pdf
http://www.stinkbuddies.com/
This is the original build, go to forums there to get much better modified ideas
http://www.stinkbuddies.com/pdfs/StinkBud_Sr02_1.pdf
Buddingbishop
Well-Known Member
Glad I could help, message me when you get this going I'd love to see it
No need to read all 500 pages. Just read the first part where he describes his setup and how to build in detail. You'll know wether or not you want to keep reading after the first post.
Just keep reading my friend. I think he says its pvc fence posts, but I would need to read again to be sure
Clown Baby
Well-Known Member
these arent hard to build.
you can make one with a rubbermaid tote, hole saw, pump, and some tubing.
save a lot of money, if you're into that kind of thing,.
you can make one with a rubbermaid tote, hole saw, pump, and some tubing.
save a lot of money, if you're into that kind of thing,.
you know this system is to flower with right? its not a aero cloner. maybe you already know that im not sure cause i didnt see anything for grow chambers in your post
4tatude, did you cut a hole in the bottom of your res to attach a hose and make it easier to drain? i was thinking about doing that to my res cause its such a hastle to drain it but i dont know the correct way. unless you or someone can point me in the direction to a 70-80 gallon res with a drain hole built in
guys i just realized i ran into a big problem with using 2 aeroflo 36 systems with 1 res. anyone familiar with the system knows that for each of the 6 chambers theres a drain beneath that into the res. that means if i used 1 big res it would have to be almost 8 feet long to catch the water draining from the chambers. does anyone see a way around this? id like to use my 70 gal res with these and the diam is 31" x 54.5" x 12". how can i get the water to drain in the res without it being directly beneath the chambers?
4tatude
Well-Known Member
ok so to install a drain you need a regular5/8 or 3/4" drain for a res easily picked p at any hydro store n a whole saw for a drill to fit. ask the hydro guy what size. then drill n install. on bottom is best but requires res to be elevated, side mount is ok but you need to flush with hose or vac out whats left in bottom.
4tatude
Well-Known Member
flex tubing can be run anyway you want