ilikeweed12
Member
Hey guys, been researching this problem but so many of the symptons i read about are similar. so my nute solution was around 1,200 PPM for 2 days and it seemed to bring on some of teh symptoms below. but before that, some of the bottom leaves had holes and felt papery.
so, i have flushed the plant for 24 hours and I put it back on a 600 PPM solution and it doesn't seem to be improving. it could be even slightly worse. so, i am lost. I am not sure what to do next.
i use GH 3 part, and I was going light on the Micro and heavy on the bloom maybe too much, so my last mixing i corrected that problem as i thought it could be related to a N.
My temps are around 83, the plant is under a 600 w and has been in 12/12 for 14 days. the plant has still been growing a lot, and the top of the plant looks almost perfect, it's more of the middle and botton where the issues are. PLENTY of air flow, lots of bubbles in the DWC, res temps in mid 70s.
any insight would be much appreciated, i just don't have an eye to determine different symptoms yet. this is my first grow.
so, i have flushed the plant for 24 hours and I put it back on a 600 PPM solution and it doesn't seem to be improving. it could be even slightly worse. so, i am lost. I am not sure what to do next.
i use GH 3 part, and I was going light on the Micro and heavy on the bloom maybe too much, so my last mixing i corrected that problem as i thought it could be related to a N.
My temps are around 83, the plant is under a 600 w and has been in 12/12 for 14 days. the plant has still been growing a lot, and the top of the plant looks almost perfect, it's more of the middle and botton where the issues are. PLENTY of air flow, lots of bubbles in the DWC, res temps in mid 70s.
any insight would be much appreciated, i just don't have an eye to determine different symptoms yet. this is my first grow.