


I should add, My medium is clay balls and am growing under a 600HPS lamp. My clones are grown in rockwool cubes.
I have added some pictures of the problem leaves also.
I beg you all...... PLEASE HELP ME!!!!!
How close is your light. Remember rockwool will raise ph
Could it be overwatering do you think? I dont think its heat because I also have root rot.If your using your 600w, I would start at 4 feet away from the clones and gradually lowering it. Also mist at least once a day with tapwater. I would also ph your water to 5.5 to 6. No nutes for 1st week then go to 1/4 strength and again gradually increase. To me your leafs look burned from heat. All dried out
35oC when lights are on and it drops down to 22oC over night. My water out of the tap reads 0.2 ppm and 8.0 PH reading. I know its abnormal but should I not be using this water at all?What are your temps? But sounds like you need to start with the water. PH sounds off
It is a Hydro system but what is DWC?I use clay balls also. Is it a hydro setup. I use DWC. Real easy to use.
AWESOME ADVICE!!! I don't think that they do see COMPLETE darkness but I am worried that the rockwool base isn't drying out between waterings and in saying that, It would mean the roots are drenched 24/7 and the roots go nowhere because of the root rot, that having been caused by overwatering..... could I be right at all? I'm going mad trying to figure this out!!!The root rot could be from the light and heat. Make sure no light is getting to the roots
Whats your ideal Temps? and PH? I do adjust my PH down to around 6.0 but with my tap water being 8.0 before me treating it down to 6.0, is that making my water "damaged" for growing with?Your temps are too high aswell
Recirculating Drip systemWhats your hydro setup?
Whats your ideal Temps? and PH? I do adjust my PH down to around 6.0 but with my tap water being 8.0 before me treating it down to 6.0, is that making my water "damaged" for growing with?