Big Garage Grow. Build out / Grow Journal

Wood.

Active Member
Collective Grow.

garage is like 26.5'x26' split into 13x26 rooms.

Straight forward soil beds under 1kws on a flipflop. getting the first half running before we start the second half. will be at least 8kw per side. got nine hung on the first side. gonna try to get ten on the other side. got a 100+ amps to work with.

I moved into the house on monday and started working before i even had a bed at the place. bringing up to last night.

















 

karr

Well-Known Member
Gonna be a good rig. Kinda scares me. That size op is intimidating.

How hard is that insulation foam stuff to cut and trim? i need to insulate my basement but the opening is only about 3x3 and i cant fit a 4 ft wide sheet of plywood at an angle, so i need to trim.
 

dam612

Well-Known Member
please wait while the shock wears off........ok, damn. cant wait to see this fill out. +rep fer this one. along for the ride.
 

dapio

Well-Known Member
put some pics up when you are doing the fans and the carbon filters etc I like your technical detail +REP
 

BoomerBloomer57

Well-Known Member
Wait, wait ?????

Clarify that "Collective" for me please.

Do you mean a group of friends got together on this or you grow for a specific collective?

Not nitpicking, just curious. Rule #1 being the main concern.
Like how you used the foam panel. I went with the 2 inch white insulation styrofoam panels and
skipped the white vinyl sheets. Saved a lil dough.

Are you going to paint the floor white also?

Nice and clean so far and that makes a difference.
 

Wood.

Active Member
got the lights blown and burnin... decided to cut back to eight for light controller simplicity. had to move the lights around a little bit for the beds. my cords arent perfect now. oh well. lettin her run all night tonight see what the temps get like.




 

Wood.

Active Member
Wait, wait ?????

Clarify that "Collective" for me please.

Do you mean a group of friends got together on this or you grow for a specific collective?

Not nitpicking, just curious. Rule #1 being the main concern.
Like how you used the foam panel. I went with the 2 inch white insulation styrofoam panels and
skipped the white vinyl sheets. Saved a lil dough.

Are you going to paint the floor white also?

Nice and clean so far and that makes a difference.
my friend and i operate a legal Nor Cal Collective, 950+ members. not painting the floor.

yeah that two inch stuff isnt light proof thought, just an FYI, the one with only one side foil backed. the more dense both side reflective stuff is light proof. panda film is cheap. one roll did that entire half, 85 bucks. @ 18 bucks a sheet for insulation it would of cost a few hundred.
 

MedHeadGRWR

Active Member
Looking good Wood...Glad to see the new room coming together. If it's half as good as your last you posted in my thread it will be a knock out!
 

volumecutter

Active Member
Wow please post pics as it goes on. I envy thi kind of grow I could do it to in Santa Cruz we get 10x10 each so me and the misses is 20x10 legally, if I can get it dialed in here is my hopeful future!! Keep us up today, damn I wanna be there!
 

Tamorin

Active Member
nice you ggot any idea of what kind of ac your using I got a 20 by 25 ft with 12 ft cielings and im on the market for a 30,000 btu recirculating low ambient ac myself.
 

Wood.

Active Member
nice you ggot any idea of what kind of ac your using I got a 20 by 25 ft with 12 ft cielings and im on the market for a 30,000 btu recirculating low ambient ac myself.
its a frigidaire, Home depot special i think. 10k btu. one of those ones that cost like a couple hundred bucks. i have two of them if shit gets real nasty. but never had to use both at my last spot running 14k lights.
 

MedHeadGRWR

Active Member
Coming together quick and clean...Curious if I remember right you were using 2 gallon perfect pots in your last grow???? If so what medium did you use and did you have any problems with root bound?
 
Top