A Medicinal Refrigerator

[Danielsgb]

Here's Pics of before and after for #3 and #4 for up-canning. Also one of the Lst'n that got mostly loosened and one of the top I snapped. No big deal anyway.
After seeing them in there and seeing I have 20" to the Heat Bulb I plan to flower them right away or maybe delay 1 or 2 days (a 15 min IR in the dark 12hr should do it). Timers are set to Flower in the morning. There's this pic of the Heat Lamp Bulb on after the HID's out too.
I'll start a Grow Journal for this Freezer. Maybe tonight.
There was accusations made by these two about Mary Parker (the Royal Kush in sig link) I'll check it out in the morning. GB, told ya patience on this one
Daniels

 

[reggaerican]

heck yea daniel good to c some ladies in there.. all smoke to that brother
make t hat 2 times giants lost tonight

 

[Danielsgb]

Here's the new journal
FrigiDare 2 Indica's Infrared Spectrum Trial
check it out all
Daniels

 

[gumball]

looks great daniels! yes, patience is key. you should try the gradual transition into flower like riddleme and I do. i actually thought you did it too, but you do a lot of stuff still. i know that bagseed of mine showed preflowers at 14/10 transitioning from 16/8 at 30 minute increments. i am sure you know yours are female though so no biggy there

 

[Danielsgb]

looks great daniels! yes, patience is key. you should try the gradual transition into flower like riddleme and I do. i actually thought you did it too, but you do a lot of stuff still. i know that bagseed of mine showed preflowers at 14/10 transitioning from 16/8 at 30 minute increments. i am sure you know yours are female though so no biggy there

I was planning something else actually. Have the IR once or twice during Dark time, like Ed. Rosenthal talks about. Problem is that I can't have 6" of veg growth then Flower.or buds will be too close to IR and CMH. Adapt as we go, huh.
Daniels

 

[Danielsgb]

I added this yesterday too. Might help stream line air above and obviously aid in reflection. It's Velcro'd in. The Temp Remote Sensors are working. It picked up #3 as the same the fridge uses for amb. garage too.
Daniels

 

[Danielsgb]

I labeled the Ballasts and connected the drain hose for an Oops.
Daniels
View attachment 1196530

 

[crazytrain14]

nice bro. ok so little comfused but is the ehat lamo just for heat? if not how are you using it, with the other lights for lights on or what?

later man

 

[Danielsgb]

My Grow Journal has how the Heat Lamp will put off Infrared and it's use. It's FrigiDare 2 Indica's Infrared Spectrum Trial in my sig links. If you have more ?'s let me know here or there.
Daniels

 

[Danielsgb]

Check out my Buddy's Top-feed Eb & Floe system with an A.F.
Auto berry grow thread. 2nd grow. 1st in a grow tent!!!
One of you guys might be able to help. I don't know much about Hydroponics.Daniels

 

[Danielsgb]

I got something figured out to 'make it rain'. My veg pot and my flowering pot on them. I used a jigsaw to cut a shelf for two 5 gal. buckets to drain through. The center bar "just" fits so it can't slide off. A pic of my helper Cash too.
Daniels

 

[gumball]

Cash looks stoned!! Great idea! So you pull them out each. Time and set them there?

 

[Danielsgb]

Cash looks stoned!! Great idea! So you pull them out each. Time and set them there?

He usually looks more stoned. Kinda just absorbs it from me, I guess. You got it. Pull to here, 'Rain', drain, put home and dump the waste water. I'm thinking a pot in between these for flowering.

 

[Danielsgb]

The build journal picks up again.
I decided to change up the main flowering chamber.
I'll make a new hood and run the 400W CMH in there instead of the dual 150W HPS's. I will add a 250W CMH to the veg table instead of the 400W.
So I have the load center with fan and timer already to go for the 250W HPS kit. I have the Mogul socket too. I decided yesterday on the switch up, but typing this out has cemented the plan.
I have something new to add to this hood so stay tuned.
Daniels

 

[Danielsgb]

Bulb ordered.
https://www.lightingsupply.com/CDM250S50-HOR-4K-ALTO.aspx

 

[Danielsgb]

Ballast ordered
http://www.htgsupply.com/viewproduct.asp?productID=45719

 

[n00bGrower]

That freezer setup looks sweet! how do you handle the temps in there? My freezer conversion was only using 3 (4 max) CFLs at one time and the temps were usually way to high. I can't imagine how your running HID's in there! One thing I did recently was jigsaw around the perimeter of the door shelving off the door of my freezer and removed the whole thing. I attached some plywood to a few horizontal wood slats I screwed into the door and covered it with reflective flashing... Added a ton of space and now the whole front (inside part of the door) isn't screwing up the light and air flow.

View attachment 1289307

Your freezers got me to get my ass in gear getting my freezer back up.... Thanks for the inspiration dude!

 

[Danielsgb]

Quick answer is air flow. Fridge has a Cool Tube with separate air flow for it's 150W CMH so it was easier. Intake low sucks cold air from the concrete too. Glad to help if I can. I love to hear I inspire someone. Most issues for one of these is in this build journal.
Daniels

 

[HowzerMD]

https://www.rollitup.org/general-marijuana-growing/390390-howzers-cabinet-extravaganza-no-clowns.html

 

[Danielsgb]

I got the Remote Ballast with Timer done for my 250W CMH for my Veg Table. I added something new to this one. I added a 110v female plug after the Timer. Now I can run a Cfl for the area where I start seeds or clone off the 18/6 or 20/4. Is the Cap touching the ballast OK (just barely)? I'm pretty sure that's safe.
I mounted it outside of the main room in my clone & work area. I used a 9v Power supply with plenty of Amp. The 12v supplies were all too big or over kill (like 1.3a to a .18a fan). It's a green fan to keep the ballast cool, I'll add the stickers later when I re-wire the 400W CMH I veg with to my flowering chamber. My next project is the hood for that chamber.
Daniels