azzno39
Member
Firstly i'd like to say thankyou for having a look at my first ever full attempt at growing! This has been something I have spent alot of time debating, pricing ect and now the time has finally arrisen!
So here's a look at the setup!
Firstly the growing enviroment -
1x1x2m Secret Jardin DS100 grow tent.
I have decided to go with a WILMA 4 pot Hydroponic system using Clay pebbles as the grow medium and IONIC nutrient solutions. At the moment the blue flood drippers are in place and are set on a digital timer to be turned on for 15 minutes every 3 hours. I have only been using 50% recommended nutrient dosage -
As for lighting I have a 600w hps bulb inside a CoolTube reflector. The light is held in position from the centre roof bar using EasyRolls and is currently set on a digital timer for 18/6. On the left handside of the reflector, connected via ducting, is a standard carbon filter. On the other side (again via the ducting) is a TT100 extractor fan exhausting the heat outside of the tent.
At first I only had a standard reflector on the 600w hps and soon found out the hard way that the heat produced in such a small enviroment is overpowering. Tent temperatures towards the end of the light period would spiral into the high 30's (Celcius). Unfortunately because of this heat stress started to become noticeable along the leaf tips (see attached photos)
So here I am, new system in place so lets hope growth gets back on its way and i'll be keeping this journal updated as much as possible with pictures ect.
All comments, feedback ect welcome! I realise not much is going on at the moment but keep tuned!
Peace out RIU
So here's a look at the setup!
Firstly the growing enviroment -
1x1x2m Secret Jardin DS100 grow tent.
I have decided to go with a WILMA 4 pot Hydroponic system using Clay pebbles as the grow medium and IONIC nutrient solutions. At the moment the blue flood drippers are in place and are set on a digital timer to be turned on for 15 minutes every 3 hours. I have only been using 50% recommended nutrient dosage -
As for lighting I have a 600w hps bulb inside a CoolTube reflector. The light is held in position from the centre roof bar using EasyRolls and is currently set on a digital timer for 18/6. On the left handside of the reflector, connected via ducting, is a standard carbon filter. On the other side (again via the ducting) is a TT100 extractor fan exhausting the heat outside of the tent.
At first I only had a standard reflector on the 600w hps and soon found out the hard way that the heat produced in such a small enviroment is overpowering. Tent temperatures towards the end of the light period would spiral into the high 30's (Celcius). Unfortunately because of this heat stress started to become noticeable along the leaf tips (see attached photos)
So here I am, new system in place so lets hope growth gets back on its way and i'll be keeping this journal updated as much as possible with pictures ect.
All comments, feedback ect welcome! I realise not much is going on at the moment but keep tuned!
Peace out RIU
Attachments
-
57.7 KB Views: 38
-
62.8 KB Views: 46
-
61.5 KB Views: 29
-
48.7 KB Views: 27
-
52 KB Views: 31
-
63.2 KB Views: 36