A Timer That Will Switch onand off 288 times a day

[laceygirl]

I have been searching for a timer unit for my aerocloner....
An aerocloner requires 1 minute of watering with 4 minutes off... That requires 288 on/off settings in just 24 hours...

Can some one please recommend a timer for me... I have been looking but to no avail...

Laceygirl..

 

[mfeez]

look for the digital timers. they have ones that are programmable by the minute.

 

[shnkrmn]

laceygirl, I use an aerocloner and run it constantly with no timer. It works great. So why the timer?

 

[shnkrmn]

but here's one

http://www.plantlightinghydroponics.com/cap-nft1e-1minute-on-4minutes-off-preset-recycle-timer-p-1725.html

 

[UNICRONLIVES]

here ya go girl !! http://www.discount-hydro.com/productdisp.php?pid=74&navid=7

 

[laceygirl]

Going to try each link... Thank you very much...

I was told that 1 minute on 4 minutes off is the best way to get 100% success... Apparently its kind of like a massage... They love it... Though I will try it constantly next time... Just to see if there is a difference...

Again thank you for all the swift replies and help... Laceygirl...

 

[laceygirl]

laceygirl, I use an aerocloner and run it constantly with no timer. It works great. So why the timer?

So you run it 24/7? And do you use any nutes (rooting solution) or just water???

Laceygirl...

 

[UNICRONLIVES]

ive had success with 90-95% on a 1 on 4 off shcedule and used super thrive ! can get it from wally world!!....good shit !!

 

[Skunk#1]

So you run it 24/7? And do you use any nutes (rooting solution) or just water???

Laceygirl...

I run mine 24/7 and I get almost 100% rate every now and again I will lose one

I use clonex I take the clone dip it in and then put it in the spot and wait about 1/2 hour after done letting the clonex soak in then turn it on. and I use about 2 tsp of tiger bloom in the water about 3 gallons or so

 

[laceygirl]

I run mine 24/7 and I get almost 100% rate every now and again I will lose one

I use clonex I take the clone dip it in and then put it in the spot and wait about 1/2 hour after done letting the clonex soak in then turn it on. and I use about 2 tsp of tiger bloom in the water about 3 gallons or so

Cool, that's what I'll try but instead of the tiger bloom, I am going to use SuperThrive... I used to use it years ago, and had forgotten about it till now...

Again thanks everyone...

 

[kiddfarmer08]

Would a hardware store or like menards carry these timers? I'm looking for one for my nft system

 

[shnkrmn]

So you run it 24/7? And do you use any nutes (rooting solution) or just water???

Laceygirl...

I use Clonex. My last run was a little slow to root but maybe that's because my basement gets very cold at night this time of year. Usually I get roots in 5-7 days.

 

[mygirls]

look for the digital timers. they have ones that are programmable by the minute.

yep what he said. thats the only timer that you can set to go on and off multipul times a day

 

[monyman]

search for CYCLE TIMER thats what u need aprox price $75-125 pending factors

 

[laceygirl]

I can't justify the expenditure everyone.. I've just priced the timers and they range from $200-260 here in Oz... So its going to be 24/7 for me, I've talked to a few people who run these cloners and they are using 24/7 misters... If it doesn't work then I will invest in one...

Thank you again for all the advice...

Laceygirl...

 

[mygirls]

I can't justify the expenditure everyone.. I've just priced the timers and they range from $200-260 here in Oz... So its going to be 24/7 for me, I've talked to a few people who run these cloners and they are using 24/7 misters... If it doesn't work then I will invest in one...

Thank you again for all the advice...

Laceygirl...

i found one at walmart that you can set for every 15 min. just a cheap 110 volt timer.