kabona
Active Member
was keeping a log on my computer... just thought i would post it here to if anyone cares to follow along!!
- 2 2' T5's on 24hrs
- tap water
- ph start @ 5.4
- Pump on around 15/15 minute on/off cycles (for water temp purposes)
- air stone on 24hrs
February 15th (Monday):
Filled the aero cloner with tap water and adjusted the Ph to 5.4 and turned my pump and timer on for 15 minute intervals. Letting it run for about 24 hours with the net pots in, but the collars out to get my water temps up a bit and let some chlorine evoporate if it needs to.
February 16th (Tuesday):
Cut clones, let them sit in cool tap water for about an hour then put them into 2" neoprene collars and put those into 2" netpots and placed them into the aerocloner running my timer in 15/15 cycles.
Ph 5.6
February 21st (Sunday):
No sign of root formation yet, added 2 cap fulls of AN Jumpstart
Ph 5.8
February 22nd (Monday):
Still no roots
- 2 2' T5's on 24hrs
- tap water
- ph start @ 5.4
- Pump on around 15/15 minute on/off cycles (for water temp purposes)
- air stone on 24hrs
February 15th (Monday):
Filled the aero cloner with tap water and adjusted the Ph to 5.4 and turned my pump and timer on for 15 minute intervals. Letting it run for about 24 hours with the net pots in, but the collars out to get my water temps up a bit and let some chlorine evoporate if it needs to.
February 16th (Tuesday):
Cut clones, let them sit in cool tap water for about an hour then put them into 2" neoprene collars and put those into 2" netpots and placed them into the aerocloner running my timer in 15/15 cycles.
Ph 5.6
February 21st (Sunday):
No sign of root formation yet, added 2 cap fulls of AN Jumpstart
Ph 5.8
February 22nd (Monday):
Still no roots