Late night thinking,,,,,,,

BoomerBloomer57

Well-Known Member
Finishing up the new room for the babies.

600 wt Light
3 spd Stanley exhaust fan
New cooler
2 air pumps

7 baby girrlls to go.

I'll put the last few things together in the morning and we'll be rockin the shed.

Sucking cold air from main room or from under the shed. Exhaust out, no filter.

my name is boomerb,
christ guys, I'm all fucked up,,,,,,,


ftp
 

Attachments

BoomerBloomer57

Well-Known Member
Well I've just about got her done,,,,,

New room for the babies under a 600wt light. 1 stanley floor fan rigged for exhaust. 2 Air pumps. 8 air stones. 25-30 ft of Air hose. Hydrotron in 5 inch baskets. 1 Igloo Cooler. PH monitor and portable ecm/temp/ppm meter.

Gonna let the chlorine leach out and then at 6 pm the babies move in.

7 girls to go this time around. Current grow is only 3.

Things are gonna get crowded in da shed.

Harvest in three more saturdays!

my name is boomerb
and it's been a long days night,,,,,,,




ftp
 

Attachments

sixstring2112

Well-Known Member
dude that thing rocks. i have a cooler just like that and the lid is broke. now im thinking about your setup. what kind of styrofoam did you use, the pinkstuff or the blue stuff? i think i will try to cut mine down so it is about a third shorter.
 

BoomerBloomer57

Well-Known Member
dude that thing rocks. i have a cooler just like that and the lid is broke. now im thinking about your setup. what kind of styrofoam did you use, the pinkstuff or the blue stuff? i think i will try to cut mine down so it is about a third shorter.



it's the 1 1/2 and 2 inch insulation at lowes and homedespot,,,cheap, 12 bucks for a 8x4 sheet, I like to set the coolers on a piece instead of directly on the floor also.

I give the over lap a good four inches over the sides of the cooler,,

don't use spray paint or regular old duct tape. use the good reflective/foil tape to cover the lid completely so no light gets in. Leave one hole in the lid for airlines or use a #2 pencil and poke holes where you want to drop the air stones. make sure you can fit an ice bottle in the cooler without raising a basket with a plant in it.

Cut the net pot holes after taping topside, flipside and edges. use a razor knife and angle it inward at 25 to 30 degrees so the pot does not fall through the hole. Trim to fit snug.

Cooler--------$54.00
Lid,,,,,,,,,,,,,,,$ 6.00
Tape,,,,,,,,,,,,$ 2.00

not a bad dealio for a reusable, drain fitted, 5-7 day cooler that can be reused as a cooler when done growing with it. Easy to clean and maintain.

just my damn thoughts,,


my name is boomerB,,,,
and its just the normal noise in here,,,,



ftp
 

sixstring2112

Well-Known Member
I saw some sheets of foam today at lowes because i go there way too much. they have some 1-1/2" white sheets with a foil cover already on it. It looks really good like mylar, 9.97 for a 4x8. any ideas on making mine shorter so it holds less water. I was thinking maybe a sawzall on slow speed so i dont melt the plastic and gum up the blade.
 

BoomerBloomer57

Well-Known Member
I saw some sheets of foam today at lowes because i go there way too much. they have some 1-1/2" white sheets with a foil cover already on it. It looks really good like mylar, 9.97 for a 4x8.

crap i may have seen you there today, you a dark haired guy with a cute brunette
carrying out the 4x8 sheet? I've seen it but I've only used the white and taped it.


any ideas on making mine shorter so it holds less water. I was thinking maybe a sawzall on slow speed so i dont melt the plastic and gum up the blade.

don't cut the cooler. fill it until you are 4 fingers from the bottom of the net pot.
i use three different size coolers. 2 120 qts, 1 100 qt and a 60 qt. but they never get filled to the top.



hope this helps,,,,


my name is boomerb,
how much is too much?


ftp
 

sixstring2112

Well-Known Member
the reason i want to cut it is i dont want to lug all that water around. mine is the big one (120) i believe. it never gets used anymore cause the lid is broke. just thought if i cut it down a little it would save some water and nutes.I'm gunna do some sample cuts on the lid to see how it goes.
 
Top