hydro, 1 day of flush before cut is ok??

raponne

Member
Hello guys,

I have 1 question, because my landlondor is coming tomorrow to see the flat and i dont want the guy to see what i have in the living room.
So i im doing NFT, the plants are ready to cut and i filled the tanks yesterday just with water to clean the nuts from the plants.
Is 1 day enough to clean them???
 

raponne

Member
Hello guys,

I have 1 question, because my landlondor is coming tomorrow to see the flat and i dont want the guy to see what i have in the living room.
So i im doing NFT, the plants are ready to cut and i filled the tanks yesterday just with water to clean the nuts from the plants.
Is 1 day enough to clean them???
its a very hard question , i know:fire:
 

sparks662

Active Member
ive come across alot of discussion on this topic, some people say it doesnt matter if u flush and some swear by it, so im guessin u will be fine
 

GringoLoco

Well-Known Member
Ever heard of a tomato farmer flushing his crops prior to harvest?
Feed'em till the end, they'll thank you for it!
 

potpimp

Sector 5 Moderator
I guess he's already came but I would have told him I would be out of town or something and put him off a week.
 

raponne

Member
guys, its done...............

Know the ting that i noticed is that the buds looked very fat and massive and now they are drying for 3/4 days and they look shity:(( they lost lots of weight and the dont look nice fat buds anymore........
 

NinjaToke

Active Member
Know the ting that i noticed is that the buds looked very fat and massive and now they are drying for 3/4 days and they look shity:(( they lost lots of weight and the dont look nice fat buds anymore........
Have you grown this strain before with better results?
 

fatman7574

New Member
guys, its done...............

Know the ting that i noticed is that the buds looked very fat and massive and now they are drying for 3/4 days and they look shity:(( they lost lots of weight and the dont look nice fat buds anymore........
Dry as slow as possible but fast enough to prevent mold. ie dry in the dark in a cool place with a small continual air movement and relative humidity of about 50%. Expect to lose at least 2/3 of the initial harvest weight through drying and curing. Plants cut early in the clear resin stage lose a larger percentage of weight in curing and drying. Typically a closet with a loose fitting door and a 3 or 4 inch box fan exhausting air out of the closet is adequate air flow and humidity control if your house itself is not overly humid. Once the planys dry enough to where a stem will crack or break instead of just bending put the buds in jars with lids and open the jars about every two or three days for a few minutes then relid.
 
Top