2000w Purple Kush 106 Plant Ebb and Flow SOG

What will I yield?

  • 1 - 2 lbs

    Votes: 57 13.2%

  • 2 - 3 lbs

    Votes: 121 28.1%

  • 3 -4 lbs

    Votes: 107 24.8%

  • 4 or more lbs

    Votes: 146 33.9%
  • Total voters
    431
rbahadosingh

rbahadosingh

Well-Known Member
Here are some pics i just snapped. The first one is of my mothers. They are getting way too big. I dont have any more room in my closet to the raise the light. I think i am going to top them in a few days to try and keep them under the light until im ready to take my next set of clones. I wont be taking them until I am on day 30 of flowering so i have a while to go. That way by the time they root, this grow will be ready to harvest and I wont have any down time between grows. I hope to start the next grow the same day or the day after i harvest this grow.

Bob Smith said:
What height are you shooting for? About 12", give or take?
Click to expand...
Im shooting for about anywhere from 8 - 12" give or take. But i think right around 10 would be perfect. I pretty much want them to be the same size my last ones were when i switched. At the rate they're going right now i would say about 7 to 10 more days and they will be ready to switch.
 

Attachments

fatman7574

fatman7574

New Member
If that is empty space below the plants tables I would fill the space with water comtainers. Water containers temper a space well as they soak up excess heat and then release it slowly after the lights go out.
 
spagettiheady420

spagettiheady420

Well-Known Member
fatman7574 said:
If that is empty space below the plants tables I would fill the space with water comtainers. Water containers temper a space well as they soak up excess heat and then release it slowly after the lights go out.
Click to expand...
Water containers?? Are you serious? Wow, try something that is actually for hydro like hydroton- grow smarter not harder-and besides you can re use the hydroton and it's alot easier to clean.
 
fatman7574

fatman7574

New Member
Closed water containers. i.e. gallon jugs, 5 gallon jugs, storage containers with lids (the ones that roll under beds are nice), 30 to 55 gallon barrels etc. Anything that will fit. Consider it like using a large reservoir to remove the heat from lamps with water cooled tubes. The heat removed from the room is stored in the water as the water holds a great deal of thermal energy for each degree of temperature rise. Consider that it will soak up heat continually while the lights are on and slowly release it after the lights go off so the areas will heat up slower and cool off slower so the temperature extremes will be less.

For an example a bath tub full of 90 degrre water cools off a lot slower when you open the bath room door than does the room air even if it was 90 degrees air inside the room. But the air that enters the room is 70 degrees, so almost instantly the room air is 70 degrees. But close the door and the room air will heat back up to the temperature of the water. Most solar homes have huge insulated water storage tanks. The sun heats the water and it is stored in the tanks and used when need (at night or on cloudy days). They also utilize passive storage wg hich is water tanks of concrete walls which soak up heat and release it later. It is possible with a grow room to utilize enough storage to not have to air condition at all, but that is about 3 to 5 hundred gallons per 1000 watt light in a heavily insulated, sealed, grow room. It requires considerably less with to soak up excess gheat with a non insulated, not fully sealed room where a lot of the heat is already lost through the walls, floor and ceiling, but they also cool off quicker at night as the water can only store so much heat.
 
purple voodoo#5

purple voodoo#5

Member
you got a nice ass set up fisrt of all and secondly i run purple kush under 2000 watts myself and was wondering what is the cfm rating on your fans that cool your lights? i have a 450cfm osterberg on each side of the lights.:bigjoint:p.s. your gona yeild a muthafuckin shit load!!!:bigjoint::bigjoint::bigjoint:
 
rbahadosingh

rbahadosingh

Well-Known Member
purple voodoo#5 said:
you got a nice ass set up fisrt of all and secondly i run purple kush under 2000 watts myself and was wondering what is the cfm rating on your fans that cool your lights? i have a 450cfm osterberg on each side of the lights.:bigjoint:p.s. your gona yeild a muthafuckin shit load!!!:bigjoint::bigjoint::bigjoint:
Click to expand...
thanks. the fan is a vortex 8" the cfm rating is 747. and i hope i yield a shit load.
 
S

srryan2

Well-Known Member
how long do you veg your clones after they take root?

im trying to get set up for a sog grow i want to do 32 plants in a 2' feet & 2" inches wide by 7' feet long pattern under 2 600 hps lights.

so that comes out to around 0.46 square feet per plant spaced apart. so thats almost a 1/2 square foot per plant. so how long should i veg my clones after they take root? if i can get 1 oz per plant that would make me 2 lbs. or 1.5 lbs @ 0.75 oz per plant.
 
rbahadosingh

rbahadosingh

Well-Known Member
srryan2 said:
how long do you veg your clones after they take root?

im trying to get set up for a sog grow i want to do 32 plants in a 2' feet & 2" inches wide by 7' feet long pattern under 2 600 hps lights.

so that comes out to around 0.46 square feet per plant spaced apart. so thats almost a 1/2 square foot per plant. so how long should i veg my clones after they take root? if i can get 1 oz per plant that would make me 2 lbs. or 1.5 lbs @ 0.75 oz per plant.
Click to expand...
i veg for around 2 weeks or until they are about 10 inches or so. I just veg long enough for the roots to take hold into the coco mat pretty well and then switch to flower. you will definately get what you expect as long as its a pretty good yielding strain. you can maximize your yield with using co2.
 
kovo

kovo

Active Member
love the grow man! could you post up a pic of your clone room just wanna get an idea of how your cloning 100 plants at a time and wat method your using cheers. kov
 
rbahadosingh

rbahadosingh

Well-Known Member
kovo said:
love the grow man! could you post up a pic of your clone room just wanna get an idea of how your cloning 100 plants at a time and wat method your using cheers. kov
Click to expand...
ill take a picture of it later. in all honesty its very easy to take that many clones at a time and you dont need that much space at all. my clones are done in a cabinet that measures 25" by 36" by 60" tall and it has 3 shelves. each shelf can hold 3 trays of clones. each tray holds 50 clones. i have the lights mounted underneath each shelf to light the trays on the shelf below. i use 3 15w fluorescent lights per shelf. i only have lights on 2 shelves right now. i havent needed the last one yet.

I use root riot cubes. I have tried rockwool and an EZ clone machine and root riot seems to work the best for me. They come pre moistened with the tray and insert So you dont have to condition them. Just cut, dip in clonex, and insert in cube. spray twice a day with water filtered through brita jug and roots in 10-14 days. my success rate is pretty high. out of 150 clones i did last time i lost about 4 or 5. used what i needed and gave the rest away to a buddy...

here is a link to the type of fluorescents i have lighting my clones............
http://www.bhphotovideo.com/c/product/600454-REG/MyStudio_MSLCOM_22_Fluorescent_Lamp_.html
 
You must log in or register to reply here.
Top