400 watt 2 liter Hempy SOG
- Thread starter Xare
- Start date
merahoon
Well-Known Member
I wish I had the link so I could hook you up with it, but, I saw a gentlemen veg his plant out in a flat space to achieive a certain heighth. Once they reached that heighth, then set the bulb hanging vetically. After that, he simply just set his plant in a circle around the buble. Bada bing bada boom! lol. I don't think you would really have to change anything beside the piece that holds your light. But then again, if it ain't broke, don't fix it. You obviously are already doing well in what your doing, so no need to figure out how to setup a vertical unless you like to experiment. Anyhow, keep up the good work man.
That 5hit
Well-Known Member
GangstaChronic
Well-Known Member
how's it going? 
Xare
Well-Known Member
Good, I added a small intake fan for the veg chamber. The T5 puts out a bit of heat and I thought it was prudent.
Also I lowered the T5 a bit too so now it sits just above the mothers.
The Clones in Flower are starting to mature a bit. Hairs on some are starting to turn.
Here is a random Individual on Day 47
pic taken out of room
Top:
middle buds:
Full shot of Clone:
Also I lowered the T5 a bit too so now it sits just above the mothers.
The Clones in Flower are starting to mature a bit. Hairs on some are starting to turn.
Here is a random Individual on Day 47
pic taken out of room
Top:
middle buds:
Full shot of Clone:
GangstaChronic
Well-Known Member
mmm... looking good. looking real good. keep up the good work
GangstaChronic
Well-Known Member
Waiting is the hard part!!! lol
how goes it?
how goes it?
Xare
Well-Known Member
Its a Purple Phenotype within my seed stock. The plants iam growing all came from seed I made. Bagseed hybrids from my saved seeds.
Chopping tomorrow, its day 65. A few of the tops got bud rot / mold - I did not spray this rotation with Greencure. And I guess the stuff does work because I got some mold this time...
GangstaChronic
Well-Known Member
mold rot? interesting. how's your air circulation?
Xare
Well-Known Member
I have one oscillating fan in my 4 x 4 flower area. It helps the hempy's breathe. And the fan keeps the top of the hempy dry so algae wont grow.
Humidity is the likely culprit of the budmold.
Iam not worried about it, I cut away the bad stuff and move on.
This next rotation I will use my prevention spray. Its fair to say will be using the spray as a crutch because I dont want to buy a dehumidifier or up my ventilation.
Besides that... Ive upped the ante.
6 rows of 6 two liter hempys !
I have bit of room in the grow chamber to expand by adding 11 more hempys to the flowering rotation, this will fill out about a 3.5 x 3.5 with some space between each clone.
My idea is to switch to some different genetics I have growing (mothers) and flower some of the old mothers.
The new genetics iam switching to is something I grew outside but its doing much better inside. It grows more vigorously then the plants I have from seed I made.
So instead of using 25 in about a 3 x 3 space I plan on running 36 in 3.5 x 3.5 and raising my light a bit.
I have been keeping the light very close to the tops, nearly 7-8 inches. Ive noticed that some leafs under the bright spots look "over worked". And at the edge of the light they looked healthy. So raising the light should be a good for the plants, as well as giving me a larger footprint.
Right now the new genetics ive labeled "A" are taller then my seed stock clones.
13-14 inches for "A" and 7-8 inches tall for my seed SOG clones. These were cloned at the same time.
All these clones have been moved to Veg under my 400 Watt HPS.
5 mothers of "A" are under my T5's along with 2 bagseed hempy for later testing.
What I would like to do is not keep any mothers at all. And with these very vigorously growing new clones I think I can do it. The ones in veg have some nice branches. I plan on taking 40 cuttings of "A" and putting them in my bubble cloner.
I will do this near Day one of flower. So they can sit in the cloner for 3-4 weeks and then get 5-6 weeks of veg time under my T5's.
That should give me at least a 12 inch clone for flowering that has some lower branches for cloning.
Adding 11 hempies and new genetics should be a nice boost to my yield.
I have one mother of "A" and its double in size to my seed stock mothers.
This next flower rotation is a mix of my seed SOG clones a few mothers and some "A" clones.
But after that I predict things will get interesting.
Humidity is the likely culprit of the budmold.
Iam not worried about it, I cut away the bad stuff and move on.
This next rotation I will use my prevention spray. Its fair to say will be using the spray as a crutch because I dont want to buy a dehumidifier or up my ventilation.
Besides that... Ive upped the ante.
6 rows of 6 two liter hempys !
I have bit of room in the grow chamber to expand by adding 11 more hempys to the flowering rotation, this will fill out about a 3.5 x 3.5 with some space between each clone.
My idea is to switch to some different genetics I have growing (mothers) and flower some of the old mothers.
The new genetics iam switching to is something I grew outside but its doing much better inside. It grows more vigorously then the plants I have from seed I made.
So instead of using 25 in about a 3 x 3 space I plan on running 36 in 3.5 x 3.5 and raising my light a bit.
I have been keeping the light very close to the tops, nearly 7-8 inches. Ive noticed that some leafs under the bright spots look "over worked". And at the edge of the light they looked healthy. So raising the light should be a good for the plants, as well as giving me a larger footprint.
Right now the new genetics ive labeled "A" are taller then my seed stock clones.
13-14 inches for "A" and 7-8 inches tall for my seed SOG clones. These were cloned at the same time.
All these clones have been moved to Veg under my 400 Watt HPS.
5 mothers of "A" are under my T5's along with 2 bagseed hempy for later testing.
What I would like to do is not keep any mothers at all. And with these very vigorously growing new clones I think I can do it. The ones in veg have some nice branches. I plan on taking 40 cuttings of "A" and putting them in my bubble cloner.
I will do this near Day one of flower. So they can sit in the cloner for 3-4 weeks and then get 5-6 weeks of veg time under my T5's.
That should give me at least a 12 inch clone for flowering that has some lower branches for cloning.
Adding 11 hempies and new genetics should be a nice boost to my yield.
I have one mother of "A" and its double in size to my seed stock mothers.
This next flower rotation is a mix of my seed SOG clones a few mothers and some "A" clones.
But after that I predict things will get interesting.
Xare
Well-Known Member
Here is a side by side comparison of my "A" genetics vs my seed stock genes.
These clones were taken as cuttings on the same day and grew in the same area, but clearly the one on the left is much bigger.
I have been getting 9-10 grams per clone flowering my seed stock genetics, but with "A" I should be able to get 12-13 grams easy.
With the addition of 11 more hempy's (36 total), that will yield me about a Pound at harvest.
These clones were taken as cuttings on the same day and grew in the same area, but clearly the one on the left is much bigger.
I have been getting 9-10 grams per clone flowering my seed stock genetics, but with "A" I should be able to get 12-13 grams easy.
With the addition of 11 more hempy's (36 total), that will yield me about a Pound at harvest.
Xare
Well-Known Member
40 fresh cuttings from the mothers labeled "A"
They are getting 5-6 hours of dark then I will put on a timer for 18/6 lighting under my T5's
This is one of the "A" mothers after taking cuttings.
5 are in the veg area with the clones but hopefully I wont need them.
And this is my flower room that I just switched to 12/12
It has 36 hempy two liters, 6 rows of 6
5 of them are old mothers of my seed. And one is a large old mother of "A"
day 1 flower:
They are getting 5-6 hours of dark then I will put on a timer for 18/6 lighting under my T5's
This is one of the "A" mothers after taking cuttings.
5 are in the veg area with the clones but hopefully I wont need them.
And this is my flower room that I just switched to 12/12
It has 36 hempy two liters, 6 rows of 6
5 of them are old mothers of my seed. And one is a large old mother of "A"
day 1 flower:
GangstaChronic
Well-Known Member
so what was the final weight from the 2nd harvest?
thanks.
PS Seriously - Thanks dude.
thanks.
PS Seriously - Thanks dude.