new setup pc grow
- Thread starter naash
- Start date
RanTyr
Active Member
just finished my diy pc grow box...
take a look..
any comment?
Is that aluminum foil? If so replace that with an emergency blanket or some mylar ASAP. It can and will produce hotspots and burn the plants.
Also I would work on a movable light solutions to prevent stretching. With those CFLs you should be much closer.
What is that stone thing? CO2?
Other than those small nitpicks great job
I will be doing somethign similar for my next grow. What strain are you using?
naash
Active Member
ah ok thanx for advice will change it..
closer? it will be ok? i mean will not burn the top leaves?
no it's not co2 it's a lamp holder there are 3 bulb 2 top and 1 on the floor in the middle that's the holder....
and for the seeds a friend gave it to me i don't really know the strain...
closer? it will be ok? i mean will not burn the top leaves?
no it's not co2 it's a lamp holder there are 3 bulb 2 top and 1 on the floor in the middle that's the holder....
and for the seeds a friend gave it to me i don't really know the strain...
RanTyr
Active Member
Now that you mention it I notice the one in the stone thing now. That changes some things. Notice how the plants are leaning in for that light? They aren't close enough., You can really get about two inches away with a CFL as long as you airflow is decent (I noted three fans in your case).
Stretching is very bad for a stealth grow. Especially in a small space such as a PC. I would also be ready to top/fim/or lst (or any combination of those three. I plan on topping with some lst mixed in for my pc grow) very very soon.
Punch your freind in the throat and demand he tell you the strain!