BooMeR242
Well-Known Member
thanks smith. ya the carbon filter basically can be ran seperate with its own inline fan.
take the can seal one end stand it up on that end and connect the fan to the top side (so it sucks air thru the filter and out the top) and the fan cfm (cubic feet per minute ratio) should b equal to the volume of ur room) IE: 10x10x10=1000sqft (1000cfm or around that best)
our fan is 1075cfm.
the can is 75lb charcoal filter and needs to be changed every year. most growers do it sooner just for in case security reasons.
hope this helps
ALSO NEW PIX COMING SOON!
take the can seal one end stand it up on that end and connect the fan to the top side (so it sucks air thru the filter and out the top) and the fan cfm (cubic feet per minute ratio) should b equal to the volume of ur room) IE: 10x10x10=1000sqft (1000cfm or around that best)
our fan is 1075cfm.
the can is 75lb charcoal filter and needs to be changed every year. most growers do it sooner just for in case security reasons.
hope this helps
ALSO NEW PIX COMING SOON!