lerellion
Well-Known Member
Ok I am putting together a grow room / closet. I was really really stoned when I came up with the plan so I thought I had better run this buy the peeps at rollitup.org. I have not started building it yet, and will order my seeds when construction is complete. I will be building the closet in my garage it is only a single wide garage so space is a premium. What I want to accomplish is harvest 2-3 lbs every harvest to accommodate this I am planning on building a structure with the following dimensions
Exterior dimensions:
6 feet, 6 inches tall by 8 feet, 2 inches long, and 4 feet, 2 inches deep
Interior dimensions:
Main compartment (Grow area):
6 feet tall by 6 feet long and 4 feet deep. (= 24 square feet)
Compartment 2 (upper compartment) (cloning area / geminating)
2 feet wide 4 feet deep (height will be adjustable dependending on the need of compartment 3)
Compartment 3 (lower compartment) (mothers compartment)
2 feet wide 4 feet deep (height will be adjustable)
This will be built using 2x4’s and ½ inch plywood.
Once built I will be caulking all inside seams, painting with KILLZ and covering with panda plastic. Air intake will be filtered and on a butterfly valve to minimizes air / Co2 leakage. Exhaust will also be on a butterfly valve (to minimize contaminated air leaking in to room.) And filter to minimize odor. I am geeky and plan on getting hitech Co2, temp, humidity monitors.
I plan to veg using CFL and flower using HPS
So now my questions:
1. Is the interior large enough to be able to yield 2-3 lbs
2. How many CFL’s would I need to Veg in this room?
3. Should I use CFL? If no what should I use?
4. What wattage HPS should be used to Flower?
5. Will heat be an issue in this space?
6. What kind of intake and exhaust fan should I use for good air /co2 flow?
7. If you were to change anything on this what would you change and why?
Thanks for the help
Exterior dimensions:
6 feet, 6 inches tall by 8 feet, 2 inches long, and 4 feet, 2 inches deep
Interior dimensions:
Main compartment (Grow area):
6 feet tall by 6 feet long and 4 feet deep. (= 24 square feet)
Compartment 2 (upper compartment) (cloning area / geminating)
2 feet wide 4 feet deep (height will be adjustable dependending on the need of compartment 3)
Compartment 3 (lower compartment) (mothers compartment)
2 feet wide 4 feet deep (height will be adjustable)
This will be built using 2x4’s and ½ inch plywood.
Once built I will be caulking all inside seams, painting with KILLZ and covering with panda plastic. Air intake will be filtered and on a butterfly valve to minimizes air / Co2 leakage. Exhaust will also be on a butterfly valve (to minimize contaminated air leaking in to room.) And filter to minimize odor. I am geeky and plan on getting hitech Co2, temp, humidity monitors.
I plan to veg using CFL and flower using HPS
So now my questions:
1. Is the interior large enough to be able to yield 2-3 lbs
2. How many CFL’s would I need to Veg in this room?
3. Should I use CFL? If no what should I use?
4. What wattage HPS should be used to Flower?
5. Will heat be an issue in this space?
6. What kind of intake and exhaust fan should I use for good air /co2 flow?
7. If you were to change anything on this what would you change and why?
Thanks for the help