i have 3 in a 4x8x6.5question can 1 of stinkbud systems fit in a 4by4by7 grow tent
Yes if you scale down to 6 or 8 hole posts, I have a 4x4 tent a two 8 hole would fit... But the whole Idea is to have a harvest every 3 weeks using 3 flowering systems, veg and clones... To do that 3 system setup in a 4x4 tent will need a one rail system x 3 with tubs right next to each other that will fit side by side like that. I know GH sells an 8gallon tub that would fit, its the lower controller for the water farm they sell. Since a single rail with 3 or 4 hole using a min one gallon for each plant, that should work out nicely... I hope Stink will post his Jr system or a mini system for us soon... peacequestion can 1 of stinkbud systems fit in a 4by4by7 grow tent
I also am courios about barneysoh btw Stink, any experience with Barneys Farm?
Is that stuff available at Lowes or Home Depot? I'd like to have a look at it.Also i had trouble buying neoprene inserts so if anyone else is having trouble or want a cheap option all i did was buy some expansion joint(which comes in a roll) and is used in between the concrete in footpaths and things like that. Then i just cut them to size and a cut in the middle... essentially doing the same thing but its home made.
No, you may want to try a nursery or a hydroponics shop locally.Is that stuff available at Lowes or Home Depot? I'd like to have a look at it.
Clones don't need nutes. All they need is plain tap water and time.Any advice would help . I put the seeds in a wet paper towel on the 4th and let them sit in there for 24 hours put them in rapid rooter after the 24 hr period on the 10th I put them into the cloner ,stinkbuds design of course . I started them out on clonex 150ml,calmag 5ml/g,gro pro 7.5ml/g,liquidkarma5ml/g. Being a noob I tried to get the ppm @ 700 like stinkbud said to but I have it @ around 830ppm , water temp @ 68 , ph is 5.9. Question being is the ppm to much do I need to drain and start over ? or do they look ok ? comments please ! Pics are not great but I am trying to figure this all out ! Oh yeah strains are Blueberry skunk (all popped ) , Train wreck ( out of five 2 popped ) Endless sky all 11 popped , blueskunk and trainwreck are feminized endless not ! Sorry for such a long quote .
Thanks for the input , But these are from seed and I am using ro water , In this thread I dont remember what page , it was stated that if you use ro water you should add the calmag mag and grow pro and so on , That is the reason for the feeding !Clones don't need nutes. All they need is plain tap water and time.
Lookin' good man!.... I've been looking into a scaled down version of this method since I really don't need a pound each month.Jah bless to all the stinkbuddies!!
This is my 1st post and 1st grow, so bear with me..
I've been following stink's thread ever since I joined RIU, so first and foremost, thanks to all the long time subscribers and inquisitive minds of all kinds.
A pound a week is out of my league (for now). So may I introduce to you, my stinkbud jr mini-sog. 5 gal res, 6 hole 40" fencepost, 264ghp pumps.
The first unit is 41 days into flower. I have Super Lemon Haze and Trainwreck from GHS.
My 2nd unit, has Blue Cheese, Power Skunk, DP Blueberry and PPP. They are at 3 weeks and showing vigorous growth!!
I recently put clones of my SLH into the 3rd post 1 week early. The growth is remarkable with my scaled down version of Stink's method!
Out of all the SLH phenos I have seen online, I have yet to see one like this. It keeps shooting out pistils, and is incredibly dense!!
A friend of mine found 8 seeds in 2 pounds of sour diesel and blessed me with them. Guess who has 3 SD and a chocolope that just went into veg....ssshhh
Stank you to everyone! Peace
You're mixing up steps I think. If you use RO water, then you'll want to add cal mag for the veg and flower phases.Thanks for the input , But these are from seed and I am using ro water , In this thread I dont remember what page , it was stated that if you use ro water you should add the calmag mag and grow pro and so on , That is the reason for the feeding !
Just make sure you check your pH on your res and just follow the instructions on the bottle of clonex. You can also add Botanicare Liquid Karma a 5ml/gallon and Gro Pro at 7.5ml/gallon. If you are using RO water make sure you add some Cal-Mag+ at 5ml/gallon to the res. Not trying to start anything but like I said this is what I was working on !You're mixing up steps I think. If you use RO water, then you'll want to add cal mag for the veg and flower phases.
Since these are from seeds, you should already have a tap root, and possibly a couple more nubs and such going, which is all the cloner's designed to give ya. I'd suggest moving em to the veg phase, giving em the full nute treatment, and watching the fun
Sorry if its not thread appropriate... but I was wondering if you could breifly tell me about how long it would take a healthy, rooted clone thats veging under 1000w MH, to grow large enough to produce about 20-30 clones itself... about to get started on my next run and I've never tried growing my own mother plant... buying the clones at bud shops is getting to be an expense i'd love to do away with...
-Mitus