Electrical Ques. If I can help someone I will...

lorenzo08

Well-Known Member
so the circuit is a single outlet or the pair of outlets?
my circuit, I mean everything connected to the one breaker. example, if you have a 20 amp breaker, adding up everything plugged into outlets on that same circuit can't come close or over that 20 amp limit or you'll have trouble with it tripping.
 

The Virginian

Active Member
I've been a member here for almost a month now and I see alot of people asking electrical questions...

I've been an Electrician for about 10yrs now so if someone has a question pertaining to electrical or wiring, I'll be happy to help if I can
hey thanks dude some times getting info can make you not want to anyway how wil my bill go up using 400 watters?
 

ManikMarijuana

Well-Known Member
i got a question, iv got numerous cfl's and a problem with my wiring i wanna know if its possible to wire all my light sockets on to one plug and if not possible then how many sockets could i wire up to one plug? they all just regulat cfl bulbs, the screw in ones and a few bayonet caps. thanx for help in advance!
 

CrackerJax

New Member
i got a question, iv got numerous cfl's and a problem with my wiring i wanna know if its possible to wire all my light sockets on to one plug and if not possible then how many sockets could i wire up to one plug? they all just regulat cfl bulbs, the screw in ones and a few bayonet caps. thanx for help in advance!

Your answer is in the previous 2 pages....

Watts divided by volts = draw


out. :blsmoke:
 

winkdogg420

Well-Known Member
i have no heat issues or draw problems my whole room is on a 15 amp breaker i think im only using 6 amps with all my lights ant the timer and fan. common sense can help here too if your extension cord is warm your pushing the limit! i make sure that thr romex running to the breaker box stays cool too, nothing even warms up in my basement!


i got a question, iv got numerous cfl's and a problem with my wiring i wanna know if its possible to wire all my light sockets on to one plug and if not possible then how many sockets could i wire up to one plug? they all just regulat cfl bulbs, the screw in ones and a few bayonet caps. thanx for help in advance!
 

ManikMarijuana

Well-Known Member
i have no heat issues or draw problems my whole room is on a 15 amp breaker i think im only using 6 amps with all my lights ant the timer and fan. common sense can help here too if your extension cord is warm your pushing the limit! i make sure that thr romex running to the breaker box stays cool too, nothing even warms up in my basement!
how did u run all your cfl's and stuff off 1plug? i gotta know that!
 

chucktownskunk

Well-Known Member
its 1 amp per 100 watts and i run 15 amps on a 20amp breaker!!! whatever you do dont let your girl use the hair drier upstairs or the lights will go out!!
 

winkdogg420

Well-Known Member
both vanity lights are wired together to 1 plug=16 bulbs and i have a three outlet adapter on my timer the other four bulbs plug into that the timer and fan are on a powerstrip fan stays on when lights go out ! the power strip plugs into 1 outlet! 20 bulbs 1timer 1fan one plug!! nothing even gets warm!! the power strip is gfi-surge protection must be a good one no dollar store powerstrips!!


how did u run all your cfl's and stuff off 1plug? i gotta know that!
 

connollyeamo

Active Member
iv a quiestion iv 3 hindu kush growin at the min nd they are gettin 2 big for the space i have them in , i made a tank for my snake nd its really big , i was thinkin of halfin it off nd puttin them in there , ya yhink the smell would effect the snake???:weed:
 

winkdogg420

Well-Known Member
the snake could break the plant trying to climb on it . the plant shouldnt hurt the snake though!


iv a quiestion iv 3 hindu kush growin at the min nd they are gettin 2 big for the space i have them in , i made a tank for my snake nd its really big , i was thinkin of halfin it off nd puttin them in there , ya yhink the smell would effect the snake???:weed:
 

Dirtfree

Well-Known Member
I dont know if someone has already asked this but i couldnt find it in here. I ran a new line from my box to my grow room and come to find out it is 240. I would like to split this down to two lines of 120. If anyone can help it would be greatly appreciated!!! I need to fire up my new light like NOW! Just a lil more info.. it is on a dual 40 breaker. Thanks again
 

winkdogg420

Well-Known Member
You can put a transformer in-line to give you 2x120v feeds i think you can buy a box that will make the split easy! I think a few pages back there is a full description of how this works!


i dont know if someone has already asked this but i couldnt find it in here. I ran a new line from my box to my grow room and come to find out it is 240. I would like to split this down to two lines of 120. If anyone can help it would be greatly appreciated!!! I need to fire up my new light like now! Just a lil more info.. It is on a dual 40 breaker. Thanks again
 

Dirtfree

Well-Known Member
Thank you for your response Winkdogg! When you say transformer do you mean a pannel box or breaker box?? How would i go about finding one? Once again thank you my friend!
 

winkdogg420

Well-Known Member
i have never ran across this problem in my grow or my work but like i said i know there is something available i will find you something and post it here ok!


Thank you for your response Winkdogg! When you say transformer do you mean a pannel box or breaker box?? How would i go about finding one? Once again thank you my friend!
 
Top