Phytoplankton
Well-Known Member
As so eloquently said above, Coco or Compost, not both, you've managed to make "frankensoil".
You might consider doing some research on how to grow in coco before you start........cocoforcannabis.com.That's the plan. I just wanna grow some beautiful flowers and it seems soil makes it harder than it needs to be.
Actually either medium choice is fineThat's the plan. I just wanna grow some beautiful flowers and it seems soil makes it harder than it needs to be.
Absolutely nothing wrong with using coco as a base insteaf of peat… this was the first cycle on this pot using coco/perlite, compost, ewc, dr earth (veg+flower), and a few other leftover bags of karanja, crustacean meal and other goodies… had to chop early cause i had to leave for two weeks but it made it 51 days no problemJust my 2 cents:
Sounds like too much humus in the mix, between compost and ewc you're at 60% of the total mix. Next time go for more like 20-30%.
Did you add any of the Dr Earth amendments to the original mix? Or just top-dress? With organics it's really hard to catch up once you get behind, especially with autos. 1.5 - 2 cups per cubic foot is a good place to start.
3 gallons is a bit on the small side for organic soil, hard to feed properly without it being too hot. 5-7 gallons might be a better size.
Maybe an unpopular opinion, but I don't see anything wrong with using coco instead of peat in an organic mix. Can any of the naysayers explain the science behind this? Or is it just cuz everyone wants to hate on Mr Canuck?
Oh, also looks like most of the "deficiencies" are on there top half of the plants. It's possible your light is too intense/temps too high/humidity too low? Like they're transpiring too fast and can't get the nutrients to the tops where they need to be...? I dunno what the science is behind that but I see that sort of thing happen in some grows when the environment is too "intense" in some way, and it's got nothing to do with nutrients.
Yeah, those look great.Absolutely nothing wrong with using coco as a base insteaf of peat… this was the first cycle on this pot using coco/perlite, compost, ewc, dr earth (veg+flower), and a few other leftover bags of karanja, crustacean meal and other goodies… had to chop early cause i had to leave for two weeks but it made it 51 days no problem
Another comment below mentioned the light intensity as being a possible factor. I may have underestimated just how powerful the light is in relation to their tolerances. VPD has been solid for the most part. I attached a pic with the last couple months and set the line at about the average point.Just my 2 cents:
Sounds like too much humus in the mix, between compost and ewc you're at 60% of the total mix. Next time go for more like 20-30%.
Did you add any of the Dr Earth amendments to the original mix? Or just top-dress? With organics it's really hard to catch up once you get behind, especially with autos. 1.5 - 2 cups per cubic foot is a good place to start.
3 gallons is a bit on the small side for organic soil, hard to feed properly without it being too hot. 5-7 gallons might be a better size.
Maybe an unpopular opinion, but I don't see anything wrong with using coco instead of peat in an organic mix. Can any of the naysayers explain the science behind this? Or is it just cuz everyone wants to hate on Mr Canuck?
Oh, also looks like most of the "deficiencies" are on there top half of the plants. It's possible your light is too intense/temps too high/humidity too low? Like they're transpiring too fast and can't get the nutrients to the tops where they need to be...? I dunno what the science is behind that but I see that sort of thing happen in some grows when the environment is too "intense" in some way, and it's got nothing to do with nutrients.
Will def be doing that. Thanks.You might consider doing some research on how to grow in coco before you start........cocoforcannabis.com.
Good luck.
It's very well possible they couldn't handle the 75%. I may have underestimated their strength.I'm with @weedstoner420 on this one. Partly because I own that exact light.
At nearly every intensity, especially over 50%, I have problems if the light is even an inch closer than 24. Those diodes are packed in there.
Do you have an iphone? The photone app is pretty great as a par measuring device. Android has another solution with the uni-t bluetooth device which works as well. I ended up buying a phantom photobio and im pretty happy with it; i used to burn all my plants under the hlg350r and the gavita 1700e until i started measuring my par readings and adjusting accordinglyIt's very well possible they couldn't handle the 75%. I may have underestimated their strength.
It's very well possible they couldn't handle the 75%. I may have underestimated their strength.
I also used coco instead of peat moss. It works out pretty good. I don't like peat moss since if it dries and it's hard to get it soak up water again. With coco there's no problems.Experimentation. I figured since coco is inert, like peat moss, if I used something buffered from a decent brand, it wouldn't cause that big of a headache as long as I dialed in the feeding and kept microbial life active with the compost, ewc, and LABS.
I used to have an iPhone last year before I lost it and I've been using a Pixel 8. I actually downloaded the app for android and used that to get a general idea of what they were getting and if I remember right, at 85% the readings were in the mid 500's. I've never heard of the photobio, I'll check it out. How do you like it?Do you have an iphone? The photone app is pretty great as a par measuring device. Android has another solution with the uni-t bluetooth device which works as well. I ended up buying a phantom photobio and im pretty happy with it; i used to burn all my plants under the hlg350r and the gavita 1700e until i started measuring my par readings and adjusting accordingly
Ahhh. Big mistake bumping the light up. That's very good to know. Thanks.
- Light Schedule: 20/4
- Light Intensity
- 25% - sprout to seedling
- 40% - seedling to veg
- 50% - veg to preflower
- 75% - preflower to mid-flower
- 85% - mid-flower (now)
I don't grow autos but if they are the same as photoperiod with their demands then the light intensity should not be raised in late flower. The demands of the plant for water and nutrients are highest during the stretch. When the stretch ends the demands go down, so it is not a time to increase the light intensity. Some growers decrease the light intensity and decrease the hours in the final weeks of flower.
I like it a lot. Really helps dial in your lightsI used to have an iPhone last year before I lost it and I've been using a Pixel 8. I actually downloaded the app for android and used that to get a general idea of what they were getting and if I remember right, at 85% the readings were in the mid 500's. I've never heard of the photobio, I'll check it out. How do you like it?
Nice and some fem beans to grow it again.I finished trimming last night and ended with 366 grams. Surprisingly I also ended up with 24 seeds.
24 seeds only the beginning. Going to find many more. I bet.I finished trimming last night and ended with 366 grams. Surprisingly I also ended up with 24 seeds.