Meat curing chamber

[DayDreamin]

I have searched all around and seen people sort of talk about it. I’m going go out on limb and ask if anyone has use a meat curing chamber to dry and cure. Most can be set at 60f and 60 humidity so my simple brain thinks sure why not.

I only have one area to grow and dry so I figured out a meat chamber in the room so I don’t have to drop my temps and all that jazz in grow room.

Usually when I think I thought of something awesome it turns out a bad idea in life so I’m just asking before I possible ruin a harvest.

 

[TCH]

I have searched all around and seen people sort of talk about it. I’m going go out on limb and ask if anyone has use a meat curing chamber to dry and cure. Most can be set at 60f and 60 humidity so my simple brain thinks sure why not.

I only have one area to grow and dry so I figured out a meat chamber in the room so I don’t have to drop my temps and all that jazz in grow room.

Usually when I think I thought of something awesome it turns out a bad idea in life so I’m just asking before I possible ruin a harvest.

I'm not at all familiar with a meat chamber, but if it can maintain 60/60, I don't see why it wouldn't work. If it's a compressor refrigeration, that may be a problem. I think it sucks too much moisture out of the air.

 

[DayDreamin]

I'm not at all familiar with a meat chamber, but if it can maintain 60/60, I don't see why it wouldn't work. If it's a compressor refrigeration, that may be a problem. I think it sucks too much moisture out of the air.

yeah I was looking at the cannatrol heard great things but I was looking as slightly bigger used meat chamber things. I’ll have to lookinto the compressor thing

 

[curious2garden]

I have searched all around and seen people sort of talk about it. I’m going go out on limb and ask if anyone has use a meat curing chamber to dry and cure. Most can be set at 60f and 60 humidity so my simple brain thinks sure why not.

I only have one area to grow and dry so I figured out a meat chamber in the room so I don’t have to drop my temps and all that jazz in grow room.

Usually when I think I thought of something awesome it turns out a bad idea in life so I’m just asking before I possible ruin a harvest.

It looks like it would work but they are a tad expensive:

Meat Curing Chambers

If your restaurant, deli, or butcher shop would like to easily produce aged meats, consider using a dry meat curing chamber. <a href="https://www.webstaurantstore.com/article/258/how-to-cure-meat.html" target="_blank"> The meat curing process </a> ca

www.webstaurantstore.com

Search on Koolatron. A number of us have been building small ones that run less than $300 to build.

 

[TCH]

It looks like it would work but they are a tad expensive:

Meat Curing Chambers

If your restaurant, deli, or butcher shop would like to easily produce aged meats, consider using a dry meat curing chamber. <a href="https://www.webstaurantstore.com/article/258/how-to-cure-meat.html" target="_blank"> The meat curing process </a> ca

www.webstaurantstore.com

Search on Koolatron. A number of us have been building small ones that run less than $300 to build.

Shew!!!!! Get one of those to match your baller trimmer!!!! Lol

 

[rkymtnman]

I guess my mind is in the gutter but this thread title makes me chuckle.

 

[DayDreamin]

I guess my mind is in the gutter but this thread title makes me chuckle.

Haha that shit is funny. Now I can’t unthink it

 

[DayDreamin]

It looks like it would work but they are a tad expensive:

Meat Curing Chambers

If your restaurant, deli, or butcher shop would like to easily produce aged meats, consider using a dry meat curing chamber. <a href="https://www.webstaurantstore.com/article/258/how-to-cure-meat.html" target="_blank"> The meat curing process </a> ca

www.webstaurantstore.com

Search on Koolatron. A number of us have been building small ones that run less than $300 to build.

Good lord those expensive. I saw a cheap one on Amazon I was looking at. And will definitely look up koolatron. Thanks for feedback

link to cheap one below

Amazon.com

 

[curious2garden]

Good lord those expensive. I saw a cheap one on Amazon I was looking at. And will definitely look up koolatron. Thanks for feedback

link to cheap one below

Amazon.com

I checked it out and it says that cheaper one is without the humidification system!! So they are pricey. Here's the thread I'm talking about:

Thermoelectric wine cooler drying and curing - DIY

I had read about these for a while before trying, this is not by any means a new idea nor did I come up with the idea. I was tired of over drying and drying too quickly in the winter, then freaking out about mold in the summer. A google search will give lots of other ideas, but I get a lot of...

www.rollitup.org

I'm currently drying 3 more plants. I'm on day 10. It works nicely and was right around $300.00 to build. I added 5 perforated stainless steel shelves so clean up is just popping the shelving into the dishwasher. But that was an extra $300.00

 

[DayDreamin]

Awesome thanks for the info. Going to have to check out this diy stuff. I appreciate everyone helping I’m sure there are ton of this “bright ideas” posted on here all the time lol

 

[PopAndSonGrows]

Just my very general opinion, I'd so rather hang-dry buds in "slightly off" conditions than having buds laying flat on a rack at 60/60. Just my 2 cents. The whole laying buds flat to dry them always weirds me out, lol. I'm pretty adamant about "minimal contact" to bud surfaces since that's a variable I can control. Even when weed is in jars I try not to over-tumble or unnecessarily agitate the nugs

 

[DayDreamin]

Just my very general opinion, I'd so rather hang-dry buds in "slightly off" conditions than having buds laying flat on a rack at 60/60. Just my 2 cents. The whole laying buds flat to dry them always weirds me out, lol. I'm pretty adamant about "minimal contact" to bud surfaces since that's a variable I can control. Even when weed is in jars I try not to over-tumble or unnecessarily agitate the nugs

Solid advice

 

[Budzbuddha]

How about - I don’t know …. use a bare tent ?

This would work the same way - minor extraction fan up top just like normal / passive inlet ( at bottom ) - hung from support bars .

Hang a hygrometer in there. Zip closed.
Simple 3x3 any brand .
Save money and other drama.

You could do the same thing with a non currently running tent you not have operating.

Sometimes i mesh rack them ( i turn them over during dry ) or plant hang. Ridiculously simple.

 

[pahpah-cee]

The cannatrol was originally designed for the meat/cheese industry. …the cannabis industry was more lucrative.

 

[DayDreamin]

How about - I don’t know …. use a bare tent ?

This would work the same way - minor extraction fan up top just like normal / passive inlet ( at bottom ) - hung from support bars .

Hang a hygrometer in there. Zip closed.
Simple 3x3 any brand .
Save money and other drama.

You could do the same thing with a non currently running tent you not have operating.

Sometimes i mesh rack them ( i turn them over during dry ) or plant hang. Ridiculously simple.

yeah I only have small room I am able to grow so I can’t put another tent in there and was looking for a hope and a wish that something like the cannatrol but cheaper and slightly bigger was available.

and thanks for the awesome break down and pics I really appreciate the thought your out into reply.

 

[DayDreamin]

The cannatrol was originally designed for the meat/cheese industry. …the cannabis industry was more lucrative.

damn learn something new everyday. You just spark my rabbit hole I’m going down tonight. Cheese fridges haha thanks for giving me something to do.

 

[Budzbuddha]

yeah I only have small room I am able to grow so I can’t put another tent in there and was looking for a hope and a wish that something like the cannatrol but cheaper and slightly bigger was available.

and thanks for the awesome break down and pics I really appreciate the thought your out into reply.

Just trying to save you some beer money.

You can also fab up a drying “ box “ out of a U-Haul Garment Box. Then fold the bitch up when done



Been there done that

 

[DayDreamin]

Just trying to save you some beer money.

You can also fab up a drying “ box “ out of a U-Haul Garment Box. Then fold the bitch up when done

View attachment 5333324

Been there done that

I’ve seen that before I’ll have to look up some diy instructions. Thanks dude.

 

[zeem]

Shew!!!!! Get one of those to match your baller trimmer!!!! Lol

oh! gotta see the baller trimmer. link please.

 

[amneziaHaze]

Wine fridge is a game changer no strong smells when drying and the product retains crazy smells. But as pissman said you can use a simple carbord box to dry you can even pack it in a paper back