250CFM 4" inline fans (12V DC) 2 for $39.00

[diggitydank420]

If you can get these wired properly, this is a very good deal on some inline fans. Thought I'd share the link with you all.

http://cgi.ebay.com/NASCAR-RACE-CAR-brake-cooling-air-blower-fan-4-inch-2pc_W0QQitemZ250330993466QQcmdZViewItemQQptZRace_Car_Parts?hash=item250330993466&_trksid=p3286.c0.m14&_trkparms=66:2|65:15|39:1|240:1318

 

[Bizzler]

This looks great!!! rep+ for you.
I've been looking for something just like this. I need to vent my 400w hps

 

[BigBudBalls]

Just blow into the lights. The heat from the bulb may not sit too well with the plastic fan. (plus its more air molecules to absorb more heat)

Now to find a 10amp 12VDC power supply. (if you use both)

 

[Squarepusher45]

I like these at HTG
http://www.htgsupply.com/viewproduct.asp?productID=46434
Also they have flange adaptors if needed.

 

[diggitydank420]

Just blow into the lights. The heat from the bulb may not sit too well with the plastic fan. (plus its more air molecules to absorb more heat)

Now to find a 10amp 12VDC power supply. (if you use both)

Do you think temps would really get up past 150 degrees? ABS melts at around 220.

And as far as a 10 amp 12VDC power supply, just hit up Radio Shack...

 

[BigBudBalls]

Do you think temps would really get up past 150 degrees? ABS melts at around 220.

And as far as a 10 amp 12VDC power supply, just hit up Radio Shack...

Give it a whirl. Put a small thermometer in the inlet of the fan and see what the temps are.

 

[OneHit]

So whats the main problem with these fans? Arnt the S&P fans plastic also? These seem like a great deal. Are they difficult to wire properly?

 

[Bizzler]

it says 12VDC 4.5 amp.

Would that be a problem to hook up?
Can I just use any 12VDC cord?

 

[BloodShot420]

u could use an old computer power supply for DC Power- you just have to short 2 pins in the 20 pin atx connector and it will turn on whenever you plug it in... they usually have 30-40Amps available on the 12v rail... it will also get you 5.5v and 3v if you need it

 

[Ringsixty]

it says 12VDC 4.5 amp.

Would that be a problem to hook up?
Can I just use any 12VDC cord?

Go search the net for security camera power supply's. 12v Dc plus different models with different amp ratings.