Run off EC a lot higher than input

[Nizza]

seems like lack of air exchange or something to me maybe. What is your ventilation setup?

are you letting the pots suck the water back up or do you throw the runoff water out? This is super important and you haven't clarified this

 

[Hollatchaboy]

@Hollatchaboy

View attachment 5266426

Looks good. Did you use a scrog net?

 

[medidedicated]

Looks good. Did you use a scrog net?

One 4” to spread and keep canopy level and then 6” about 8-10” apart to do the same but to get through mid flower. Wire ties to keep super cropped nodes 90 degrees in second net.

Next time, wider canopy and no side lighting and taller space to reward myself lol.

 

[Hollatchaboy]

One 4” to spread and keep canopy level and then 6” about 8-10” apart to do the same but to get through mid flower. Wire ties to keep super cropped nodes 90 degrees in second net.

Next time, wider canopy and no side lighting and taller space to reward myself lol.

You need to weave branches thru the scrog openings. At least to scrog the way it was intended.

 

[medidedicated]

You need to weave branches thru the scrog openings. At least to scrog the way it was intended.

I did that, more heavily with the next net but it was already spread, so at this point I was just using stretch to create additional colas and keeping overall canopy level.

This is one plant, an auto. Not sure why some things look better in person but I consider this a sea, you open tent and see nothing but green.

It is hard to scrog a 2x2 because you are pretty much packing it in, instead of spreading.

 

[Hollatchaboy]

I did that, more heavily with the next net but it was already spread, so at this point I was just using stretch to create additional colas and keeping overall canopy level.

This is one plant, an auto. Not sure why some things look better in person but I consider this a sea, you open tent and see nothing but green.

It is hard to scrog a 2x2 because you are pretty much packing it in, instead of spreading.

View attachment 5266436

Holy salt buildup. Lol

 

[medidedicated]

Holy salt buildup. Lol

Helps keep the water inside when watering lol .

 

[Dazza1529]

Afternoon guys so just noticed this today one of my plants is giving out single fan leaves all the others don’t seem to be doing this any ideas iv read it could be stress or feed etc but it is o my effecting one plant

 

[medidedicated]

Afternoon guys so just noticed this today one of my plants is giving out single fan leaves all the others don’t seem to be doing this any ideas iv read it could be stress or feed etc but it is o my effecting one plant

Did you buffer? start feeding to better runoff? Lower EC to below 1.5 total? I just lowered EC today officially made my own and cannot wait to see how next time turns out.

They are clones and IMO they have a more frail root system for another week or two. Seedlings can easily follow the .5ec feed for one week and jump to .9-1.0.

I recalled you said you do not add anything else like calmg. I recall you said tap water which may have issues for some people.

Check ph before feed, it could be 6.2+

 

[Dazza1529]

Did you buffer? start feeding to better runoff? Lower EC to below 1.5 total? I just lowered EC today officially made my own and cannot wait to see how next time turns out.

They are clones and IMO they have a more frail root system for another week or two. Seedlings can easily follow the .5ec feed for one week and jump to .9-1.0.

I recalled you said you do not add anything else like calmg. I recall you said tap water which may have issues for some people.

Check ph before feed, it could be 6.2+

I use bagged canna coco it’s already buffered I feed to at least 25% run off and my feed is 1.2/1.3 EC using just canna A&B and I’m only noticing this growth on 4 of 1 plants a little strange I think

 

[Dazza1529]

Meant 1 of 4 plants haha

 

[medidedicated]

I use bagged canna coco it’s already buffered I feed to at least 25% run off and my feed is 1.2/1.3 EC using just canna A&B and I’m only noticing this growth on 4 of 1 plants a little strange I think

I read some people that using bagged coco or any coco ready to go, reviewed issues of being hungry for calmag at some point. Might want to ask some one that uses that, if you should supplement it at some point.

As it gets older, should be easier to identify and supplement. I never get calmg issues because I buffer thoroughly after rinsing to have charged, coarse coco.

I thought you said with tap, your EC would be like 1.9 EC total?

 

[Dazza1529]

No no that’s my fault my tap dosnt even register on my truncheon so overall my feed is 1.2/1.3 the George all seems healthy except that plants where is deformed grow and smaller shoots lower down seem curled

 

[Hollatchaboy]

I use canna bagged coco. I've not charged with anything, and i just water in normal nutrient solution. No problems, ime. Also I would use calcium nitrate, and mgso4, instead of calmag, if needed. I've never had a deficiency of both simultaneously.

 

[Dazza1529]

I use canna bagged coco. I've not charged with anything, and i just water in normal nutrient solution. No problems, ime. Also I would use calcium nitrate, and mgso4, instead of calmag, if needed. I've never had a deficiency of both simultaneously.

Thanks mate any idea what could be causing just that one plant to grow 1 fan leaves

 

[medidedicated]

No no that’s my fault my tap dosnt even register on my truncheon so overall my feed is 1.2/1.3 the George all seems healthy except that plants where is deformed grow and smaller shoots lower down seem curled

I checked the canna feed chart, it is nice if to use water with 0.00ec. I saw tap and thought I would include ph can drift out of range, not sure about mineral/filtered water, if it is as bad.

Mine is .5ec. I think ro quality water can drift too, just not as bad. I was under impression all water can.

It does say .9 ec early veg which my newly made feed says to. Mutation? Hope it gets resolved!

 

[Hollatchaboy]

Thanks mate any idea what could be causing just that one plant to grow 1 fan leaves

I do not, but if I had to guess, I would say it's probably not a good thing.

 

[Dazza1529]

I do not, but if I had to guess, I would say it's probably not a good thing.

Thanks pal as you can see the growths healthy

 

[Hollatchaboy]

Thanks pal as you can see the growths healthy

Yes it looks pretty good. Maybe a slight lack of light? I've had clones grow out 3 leaflets early on, until I start turning up the light.

 

[Dazza1529]

They’re under CFLs at min iv put it under the 250w now instead of the 125w iv been rotating them every couple of days to make use of the light tho how early could I put them under hps though while keeping them in veg