Looking for ideas on Ac Infinity t6 active intake / exhaust

I believe with that controller you can set a min and max fan speed for each separate unit\controller
So for the intake you can set the fan speed max to 2
For the exhaust you can set the min to 3 and max to whatever.

Pretty much what I did but I set exhaust to 4 intake at 2 @ 83f. And at 3 / 1 under 83 . So far it has worked out but my leds are only at 110w now and can go to 620w. So will see what happens when I have to raise light intensity.
 
Pretty much what I did but I set exhaust to 4 intake at 2 @ 83f. And at 3 / 1 under 83 . So far it has worked out but my leds are only at 110w now and can go to 620w. So will see what happens when I have to raise light intensity.
Edit . I am using to controller 67 to do this.
 
I’ve been running my T6 for couple years now constant with no issues. Just clean them out when they get dirty and should be good for a long time. They are great fans. In my setup I don’t even run an intake fan just the exhaust set on 2 and it pull enough air through the tent.
 
Back
Top