Watering hundreds of solo cups

Lenin1917

Lenin1917

Well-Known Member
Sounds like a huge pain in the ass ngl, you’d probably have an easier time setting up a bubble/aero cloner. Never done anything at scale like that, but you can setup solo cups for sip, you just poke holes in the bottom and put it in a tray. damn sure can’t do six weeks at least not with soil(I’ve found my max is 2) but coco is doable. Overgrow has a solo cup growoff every year and people pull off some crazy shit in solo cups with coco. Looks like a lot of work though, especially if you’re doing a bunch.
 
Star Dog

Star Dog

Well-Known Member
MidnightSun72 said:
I already have to water these girls twice a day in the cup and more probably would be better. They are almost always light. I am in there water basically every morning and every evening.
Click to expand...
I've been there bud thankfully with only with 6/10 plants, in future or until you plumbed in it would be worth ditching the perlite to give you a bit easier time.
 
DirtyJerzey

DirtyJerzey

Well-Known Member
Ill preface with that Ive never done this. But could you run a soaker hose across the tops of all of your cups and pump your solution through that? A DIY larger scale drip irrigation... more like flood. But you get the idea. Just a thought, I'm sure there are plenty of negatives with this.
I also agree with the consensus about 6 weeks being too long in a solo cup.
Maybe next go of it, you can do a wick system.
 
mudballs

mudballs

Well-Known Member
I do that with my #2 pots outside and 3/8" soaker hose. It gets wasteful, and you need a runoff catch if indoors.might as well be flood and drain at that point
 
Last edited:
DirtyJerzey

DirtyJerzey

Well-Known Member
mudballs said:
I do that with my #2 pots outside and 3/8" soaker hose. It gets wasteful, and you need a runoff catch.might as well be flood and drain at that point
Click to expand...
I can definitely understand that when your adding nutes. What about just making your own flood hose? Can take any length you need and drill 1/8" holes at the increments and position you need it to be. Granted, this will be time consuming. But considering your watering twice a day, id say its worth the time investment.

I have also seen full drip kits on Amazon and other sites. Like 40 unit systems for like 30 bucks.
 
ComputerSaysNo

ComputerSaysNo

Well-Known Member
Star Dog said:
Capillary is a good method but ime needs covering with plastic and sites cut from it otherwise the ec is affected, it turns green with algea and gives a high humidity.
Click to expand...
The capillary mat in that video appears to be avoiding some of these problems, in that it has the capillary material on the inside, which is covered by something water-tight with a lot of tiny holes in it.

That should keep the mat more or less dry except where pots are actually sitting. It would at least avoid the algae growth. Evaporation is probably also much lower than with a "conventional" mat.

Does anybody know where to get the mats that are shown in the video?

@Star Dog How did/do you avoid roots growing into the mat?
 
Star Dog

Star Dog

Well-Known Member
I've used this same principle to get me over the weekend all you need a saucer and bottle
_20220208_153903.JPG
The pictures crap and so the carton anyway you'll get the idea, hopefully you can see there's a small amount in the saucer and a large amount in the milk carton, with a V cut in the neck of the carton water can only flow once air get in (vacuum pressure) when the air stops so does the flow, it's crude but any port in a storm.

I've used these for both capillary and sitting pots directly into trays they deliver about 1" of nutrients and can't refill until it's empties I've found them 100% reliable though mines are a bit different being older.
 
Star Dog

Star Dog

Well-Known Member
ComputerSaysNo said:
The capillary mat in that video appears to be avoiding some of these problems, in that it has the capillary material on the inside, which is covered by something water-tight with a lot of tiny holes in it.

That should keep the mat more or less dry except where pots are actually sitting. It would at least avoid the algae growth. Evaporation is probably also much lower than with a "conventional" mat.

Does anybody know where to get the mats that are shown in the video?

@Star Dog How did/do you avoid roots growing into the mat?
Click to expand...
Roots growing into it was one of the reasons I changed to coco, moving plants around was a real pia.
 
mudballs

mudballs

Well-Known Member
DirtyJerzey said:
I can definitely understand that when your adding nutes. What about just making your own flood hose? Can take any length you need and drill 1/8" holes at the increments and position you need it to be. Granted, this will be time consuming. But considering your watering twice a day, id say its worth the time investment.

I have also seen full drip kits on Amazon and other sites. Like 40 unit systems for like 30 bucks.
Click to expand...
Yeah, nah i aint drilling 400 holes. Too rigid and single use application of irrigation, imo.
Yo, if ur going really high numbers but small size, NFT man, and theres no reason coco in red solo cups cant be used successfully.
If u have no clue on fertigation in this type of setup, try these boys.
https://www.rollitup.org/t/ec-rising-in-reservoir.1069977/post-16794029
Thats what id do if i needed to execute ur idea on lowest budget, highest efficiency and survivability and low maintaince. Good god i cant contemplate an alternate method tbh.
 
L

Livingblacksoil

Well-Known Member
Said 6 weeks. Then shared a picture.

Y'all are a trip. Telling an adult what not to do instead of answering the question.

100s of solos. No fckn clue

You'll figure it out though, I'm sure.

Good luck
 
You must log in or register to reply here.
Top