SOG growers wanted !!!

[onthedl0008]

Sparks that penguin pic kinda explains it all man! Been tightening up my grow on every level since bugs recent mishap....

( Bugs ITS all love and respect man) Ive been lurking or ( stalking ) ur grow for a long time dude Lol just didnt know how to approach it cuz sometimes u act like u have bugs n u LMAO!.... but like i said sparks pic of the penguin kinda sums it all up for me!
Got 2 of my blast off sites full now, 1st) previous nl X haze x unknown and the other i just put a couple durban poison.
Perpetual all the way but at this point since ive started the sog tub im trying to be carefull with what I throw in there seeings how im trying to time this right for the VAG ( or VAJ ) However u want to say it!! All stations must end up full of GINA (or better pronounced JYNA )!
No screen yet. Does it matter? Just Continuously flowering my current clones as they become worthy..
So Dudes Spark and Bugs i have a question if i dont have a screen incorporated yet does my grow count as a sog yet?
Currently heres some pix of what in the perpetual clone tub:

 

[grandpabear3]

Sparks that penguin pic kinda explains it all man!

ya, that thing was awesome....i peed a little i laughed so hard

Been tightening up my grow on every level since bugs recent mishap....

that's good. i hope someone can avoid my situation.

( Bugs ITS all love and respect man)

i never take myself seriously, so its cool bro

Ive been lurking or ( stalking ) ur grow for a long time dude

creeeeeeeeppppppyyyyyyy

Lol

just didnt know how to approach it cuz sometimes u act like u have bugs n u LMAO!....

i always tell folks to fire away with questions comments or good ol fashioned ass kickery in my threads....within reason

but like i said sparks pic of the penguin kinda sums it all up for me!

i love that damn penguin

Got 2 of my blast off sites full now, 1st) previous nl X haze x unknown and the other i just put a couple durban poison.
Perpetual all the way but at this point since ive started the sog tub im trying to be carefull with what I throw in there seeings how im trying to time this right for the VAG ( or VAJ ) However u want to say it!! All stations must end up full of GINA (or better pronounced JYNA )!

i called it va-jay-jay-bud, but any thing like that is cool as hell.

No screen yet. Does it matter? Just Continuously flowering my current clones as they become worthy..
So Dudes Spark and Bugs i have a question if i dont have a screen incorporated yet does my grow count as a sog yet?

no dude we dont scrog we sog......scrog is awesome as far as yield but a pain if you want to move plants around. its a compromise i guess. but we do it in pots bro. no screen. sorry for the confusion.

Currently heres some pix of what in the perpetual clone tub:

very nice, gonna be a nice grow. stay safe

 

[Old in the Way]

I am sorry to hear it bugs. See-I am still keeping an eye on whats happening (lurking, if you will)

I had my HID circuits done in 220 insted of using the 110-$600 well spent ($100 per outlet) Running 4000 of my 5000 watts at all times. Maybe increase the wire size and go 220 when you rebuild-again sorry for your loss.

 

[grandpabear3]

I am sorry to hear it bugs. See-I am still keeping an eye on whats happening (lurking, if you will)

I had my HID circuits done in 220 insted of using the 110-$600 well spent ($100 per outlet) Running 4000 of my 5000 watts at all times. Maybe increase the wire size and go 220 when you rebuild-again sorry for your loss.

well thank you and i think that is exactly what i'm gonna do. good idea

 

[Old in the Way]

Hey Spark.....been a while......I am running top-drip still.
Can I join??

 

[onthedl0008]

Hey Spark.....been a while......I am running top-drip still.
Can I join??

Wow.... Masterpiece sir!

 

[Old in the Way]

Wow.... Masterpiece sir!

Well TY, I started a journal in my sig if you want to check it out.

 

[onthedl0008]

Well TY, I started a journal in my sig if you want to check it out.

Sick man! Master genius should be included in ur sig! Bro please check ur Journal i had a couple questions if u wouldnt mind answering...Much respects!

 

[livesoul]

Hey fellas, in my vegetative growth stage and my mothers roots have been coming out the bottom of the pots for a couple weeks now. They are very dark green. I'm using floranova and its thick stuff. Leaves the bottom of the tray green and i wipe it down to clean it up now and again, but not sure if it bothers the plants to have the nute residue on it. They are looking great. Not a sign of any stress. But should i flush with pure water for a couple weeks or anything? I've always thought not. any thoughts? Thanks!

 

[doogleef]

Sounds like an algae issue. Are nutes in puddles where the light can get to them? If so, block the light and use some H2O2 to kill it. It will not go away but more should not grow. Some say H2O2 all the time. Some think that H2O2 is a bandaid for environmental issues like res temp an DO. Either way it will kill the green stuff on the roots.

 

[livesoul]

Hey guys, i have a couple issues. I'd like to be sure about whats going on.

I have five mother plants in my ebb&flow setup. One of them is much older, the largest one. The other four are the same age and size. The largest has a few leaves near the bottom that are burnt looking. The four young'ns also are some yellowish in their leaves. Hopefully you can see it in the pictures. Could it be a magnesium deficiency?

Also, the some of the leaves are drooping on the largest plant. I was watering 11 times a day, half hour each time. I did so much cause the room was so hot. I've gotten it down to 82degree's average and just today dropped to 8 times a day, still half hour each. I know 82 is still high. I'm gonna try and get it down further. So is the drooping just from over watering or could it have to do with the heat or nutes?

Also take a look at the roots, they are dark green. Using floranova nutes and its really thick, leaves the residue a lot.

 

[livesoul]

Sounds like an algae issue. Are nutes in puddles where the light can get to them? If so, block the light and use some H2O2 to kill it. It will not go away but more should not grow. Some say H2O2 all the time. Some think that H2O2 is a bandaid for environmental issues like res temp an DO. Either way it will kill the green stuff on the roots.

Yeah i will make a cover to keep the light off the tray and roots. Hope that helps. Thanks.

 

[doogleef]

Hey guys, i have a couple issues. I'd like to be sure about whats going on.

I have five mother plants in my ebb&flow setup. One of them is much older, the largest one. The other four are the same age and size. The largest has a few leaves near the bottom that are burnt looking. The four young'ns also are some yellowish in their leaves. Hopefully you can see it in the pictures. Could it be a magnesium deficiency?

Also, the some of the leaves are drooping on the largest plant. I was watering 11 times a day, half hour each time. I did so much cause the room was so hot. I've gotten it down to 82degree's average and just today dropped to 8 times a day, still half hour each. I know 82 is still high. I'm gonna try and get it down further. So is the drooping just from over watering or could it have to do with the heat or nutes?

Also take a look at the roots, they are dark green. Using floranova nutes and its really thick, leaves the residue a lot.

Too wet. Back off the watering. See how long it takes for them to droop from lack of water and then set the watering times for 1 hour less than that. Mj likes having LOTS of Oxygen in the roots so let the medium dry out a little. More water won't help temp issue. Need more ventilation. Nutes are probably fine. Don't chase deff. Fix the environment.

 

[sparkafire]

Livesoul

Did you get your questions answered?

 

[livesoul]

Livesoul

Did you get your questions answered?

Somewhat. So am i correct to assume the leaves are the result of nute burn? And if so then thats a result of the overwatering? The thing is it cant be because of my PPM. I'm using RO water and with Floranova i'm only keeping the ppm at 450 range. Really low. Also, today a little the leaves started creasing down the middle slightly. The should be absolutely flat correct?

And what are your thoughts on the 82 degree temp. What would be ideal for the mothers chamber? I've got some Power Skunk, Power Plant, & a Durbon Poison.

PS. That big mother turning out to be a male. I think i'm going to practice cloning off of it then killing it. I see the pollen sacks, as long as i keep it under the 24 hour light they won't pop correct? Or should i just kill it immediately and not try cloning.

 

[sparkafire]

Yes and no mine looked just like it and i just sprayed it with Epsom salts. The lower leaves tend to die off for no apparent reason as long as the over all health is good i would not worry too much. The pics did look like over watering so i hope you have that fixed. I would run up your ppm to 1500 to 1800 that might have some effect on your nute issue. with flora nova i put my clones straight into 1800 with no burn.

And what are your thoughts on the 82 degree temp. What would be ideal for the mothers chamber? I've got some Power Skunk, Power Plant, & a Durbon Poison.

Mine ran from 80 to 89 and I had no ill effects i am sure i could have done better if the temps were better kept under control but by no means hurt my plants.

PS. That big mother turning out to be a male. I think i'm going to practice cloning off of it then killing it. I see the pollen sacks, as long as i keep it under the 24 hour light they won't pop correct? Or should i just kill it immediately and not try cloning.

KILL IT!!!!

 

[doogleef]

The nute level is fine. Too much water. The medium needs to dry out between watering or you get root trouble.

 

[livesoul]

Thanks a lot. I'm watering for half hour every 2-3 hours. So its working out to 8 times per day. And I'll be killin that male tomorrow.

Also, the clones can go straight into 1800ppm because they are genetically the same age as the mother and therefore can handle it, right? What about seedlings. I have three 10 day old seedlings in my cloning tray that i'm going to be moving up with the rest of the mothers this week. So I'm planning on waiting to up the ppm in the mother chamber until i can those three in there. Sound right?

 

[livesoul]

Yes and no mine looked just like it and i just sprayed it with Epsom salts.

So you sprayed the leaves rather than mix the salt into the reservoir? How much would you recommend and for how long and how often should i do this?

 

[livesoul]

The nute level is fine. Too much water. The medium needs to dry out between watering or you get root trouble.

You think 8 times a day, 30 minutes each time is still too much? Its been a day and the droop is looking better, however, now the leaves are kinda creasing down the middle (longways). You guys seen this before?