How many plants can I fit into a square meter?

WhiteThunderBoi

Active Member
as WE all know,growing outside isn’t a privilege everybody has for massive christmas tree yields, so forcefully we tend to grow more inside grow tents that unfortunately lower the yields of plants with pros & cons.

my aim would be to at least (next season)
harvest 35-40oz.

how could it be made possible?
(best strains by yield&potency,best grow tents,lights,nutrients,techniques & growing ways!)

Let’s figure something out!



I’d love to read/hear some insights!!
5FFE858A-6AF0-4E1F-A28F-046859B5AE3D.jpeg
 

Southernontariogrower

Well-Known Member
ld do no more than 9 in 7 gal round pots, l do 8 at moment, if you want lots go with square pots, more efficient then you can do 25 in a 4x4 but hand watering would be a bitch, l put 8 inch clones in and cant hardly get to back 3 plants. I staggered my grow so l could make more room as they mature. Inrepot and put in 12x12 within a few days. So roots can grow during flower, first 3 weeks still veg. They can get pretty big for small starts.
 

WhiteThunderBoi

Active Member
ld do no more than 9 in 7 gal round pots, l do 8 at moment, if you want lots go with square pots, more efficient then you can do 25 in a 4x4 but hand watering would be a bitch, l put 8 inch clones in and cant hardly get to back 3 plants. I staggered my grow so l could make more room as they mature. Inrepot and put in 12x12 within a few days. So roots can grow during flower, first 3 weeks still veg. They can get pretty big for small starts.
now that’s some insight sir!!
what strain would you go with & why?:o:o:o
 

WhiteThunderBoi

Active Member
ld do no more than 9 in 7 gal round pots, l do 8 at moment, if you want lots go with square pots, more efficient then you can do 25 in a 4x4 but hand watering would be a bitch, l put 8 inch clones in and cant hardly get to back 3 plants. I staggered my grow so l could make more room as they mature. Inrepot and put in 12x12 within a few days. So roots can grow during flower, first 3 weeks still veg. They can get pretty big for small starts.
how’s the electricity bill tho’?
 

Southernontariogrower

Well-Known Member
now that’s some insight sir!!
what strain would you go with & why?:o:o:o
Anything Wedding Cake or cross from reputable breeder. Love everything about it, 600w led and a fan, exhaust on for 2 hrs at half about 100 cfm 1hr b4 lights off to one after, runing homebrew co2, temp gets up to 90-93 and humidity 80%rh, why l flush for 2 hours to dry up tent and replenish o2 for sleep. Then co2 builds during dark and when lights come on they suck it up, l wait 1 hr to open tent after lights on. So co2 isnt wasted. Electric bill better since unplugging 1k hps and replacing with 150w led. And exhaust isnt running full out 24 7.
 

Stealthstyle

Well-Known Member
I got between 36 and 48 ounces with an indoor vertical setup with a single 600 watt bulb i call the library- four book shelves home made in a sqaure holding 36 x 9 litre rectangle plastic pots. You can buy them at those bargain hunt shops. two plants per container and use coco coir or perlite.

Three layers of shelves making sure each container is 60cm away from 600 watt hps. all containers are on a slight angle to make a 12 sided shape.
You need to support each plant with yoyos or chain or string. they will grow sideways and need supporting. 72 clones total at 5cm clone each with a decent root system to start tthem off. veg each clone for one week.
Each clone is 8 inches apart from eachother. they will get over half an ounce each dried so need support to hold them sideways toards the hpslight.

Carbon filter on top fan sucking heat out into the ceiling space. If you're renting try to find a large light where you can cut a hole 150mm or more for the exaust out the roof.
Light positioned slightly above the lower levels of the bookshelves but accross from the top levels so top level plants dont grow down.
Some plants may want to grow up but they can be held with string or yoyos to stay sideways.
You could also get more yeild with a few clones or scrog on the bottom..make sure each bookshelf is on wheels so you can move each one easily.
Use pandaflim to lightproof each bookshelf and when you join them all togethor no light will get in.

To do this you need a decent indica i used northern light blue from delicious seeds and also blue og from g13 labs. just the right amount of stretch so they wouldnt hit the bare bulb in the middle..

You have a drainage hole with tubing going down to a drain to waste bucket on the bottom level of each bookshelf.seal each hole you drilled for this with silicone or araldyte.

The clones are hard to come by so you will need to veg your mothers for a few months enough to get 80 clones or more as you choose the best clones.
 

WhiteThunderBoi

Active Member
Anything Wedding Cake or cross from reputable breeder. Love everything about it, 600w led and a fan, exhaust on for 2 hrs at half about 100 cfm 1hr b4 lights off to one after, runing homebrew co2, temp gets up to 90-93 and humidity 80%rh, why l flush for 2 hours to dry up tent and replenish o2 for sleep. Then co2 builds during dark and when lights come on they suck it up, l wait 1 hr to open tent after lights on. So co2 isnt wasted. Electric bill better since unplugging 1k hps and replacing with 150w led. And exhaust isnt running full out 24 7.
that sounds so complicated & not at the same time to be honest sir.. i still got a lot to learn!
next grow definitely buying a Grow Tent, but maybe for the electrical issue a gas-silent type generator would be better?
 

Southernontariogrower

Well-Known Member
l used a 1k hps in flower tent, was hell. Replaced with 600w commercial light. Then used 1k for grow area, replaced with 150w led, now electric bill much better, lm not adding it up, that will just depress me. A 16 inch fan running 24x7, 100cfm for 2 hours, 600w led for 12 150w on 24x7 4 bulb florescent maybe 160w on 24x7, you do math and tell me, and a heating pad and three fishtank pumps. And another fan 14 inch 24x7. Let me know the cost?
 

WhiteThunderBoi

Active Member
I got between 36 and 48 ounces with an indoor vertical setup with a single 600 watt bulb i call the library- four book shelves home made in a sqaure holding 36 x 9 litre rectangle plastic pots. You can buy them at those bargain hunt shops. two plants per container and use coco coir or perlite.

Three layers of shelves making sure each container is 60cm away from 600 watt hps. all containers are on a slight angle to make a 12 sided shape.
You need to support each plant with yoyos or chain or string. they will grow sideways and need supporting. 72 clones total at 5cm clone each with a decent root system to start tthem off. veg each clone for one week.
Each clone is 8 inches apart from eachother. they will get over half an ounce each dried so need support to hold them sideways toards the hpslight.

Carbon filter on top fan sucking heat out into the ceiling space. If you're renting try to find a large light where you can cut a hole 150mm or more for the exaust out the roof.
Light positioned slightly above the lower levels of the bookshelves but accross from the top levels so top level plants dont grow down.
Some plants may want to grow up but they can be held with string or yoyos to stay sideways.
You could also get more yeild with a few clones or scrog on the bottom..make sure each bookshelf is on wheels so you can move each one easily.
Use pandaflim to lightproof each bookshelf and when you join them all togethor no light will get in.

To do this you need a decent indica i used northern light blue from delicious seeds and also blue og from g13 labs. just the right amount of stretch so they wouldnt hit the bare bulb in the middle..

You have a drainage hole with tubing going down to a drain to waste bucket on the bottom level of each bookshelf.seal each hole you drilled for this with silicone or araldyte.

The clones are hard to come by so you will need to veg your mothers for a few months enough to get 80 clones or more as you choose the best clones.
[/
that sounds so complicated & not at the same time to be honest sir.. i still got a lot to learn!
next grow definitely buying a Grow Tent, but maybe for the electrical issue a gas-silent type generator would be better?
sir.. do have a youtube channel or something?
i can’t picture half the stuff to be honest:lol:
 

Southernontariogrower

Well-Known Member
I got between 36 and 48 ounces with an indoor vertical setup with a single 600 watt bulb i call the library- four book shelves home made in a sqaure holding 36 x 9 litre rectangle plastic pots. You can buy them at those bargain hunt shops. two plants per container and use coco coir or perlite.

Three layers of shelves making sure each container is 60cm away from 600 watt hps. all containers are on a slight angle to make a 12 sided shape.
You need to support each plant with yoyos or chain or string. they will grow sideways and need supporting. 72 clones total at 5cm clone each with a decent root system to start tthem off. veg each clone for one week.
Each clone is 8 inches apart from eachother. they will get over half an ounce each dried so need support to hold them sideways toards the hpslight.

Carbon filter on top fan sucking heat out into the ceiling space. If you're renting try to find a large light where you can cut a hole 150mm or more for the exaust out the roof.
Light positioned slightly above the lower levels of the bookshelves but accross from the top levels so top level plants dont grow down.
Some plants may want to grow up but they can be held with string or yoyos to stay sideways.
You could also get more yeild with a few clones or scrog on the bottom..make sure each bookshelf is on wheels so you can move each one easily.
Use pandaflim to lightproof each bookshelf and when you join them all togethor no light will get in.

To do this you need a decent indica i used northern light blue from delicious seeds and also blue og from g13 labs. just the right amount of stretch so they wouldnt hit the bare bulb in the middle..

You have a drainage hole with tubing going down to a drain to waste bucket on the bottom level of each bookshelf.seal each hole you drilled for this with silicone or araldyte.

The clones are hard to come by so you will need to veg your mothers for a few months enough to get 80 clones or more as you choose the best clones.
Some of us have plant counts.
 

WhiteThunderBoi

Active Member
l used a 1k hps in flower tent, was hell. Replaced with 600w commercial light. Then used 1k for grow area, replaced with 150w led, now electric bill much better, lm not adding it up, that will just depress me. A 16 inch fan running 24x7, 100cfm for 2 hours, 600w led for 12 150w on 24x7 4 bulb florescent maybe 160w on 24x7, you do math and tell me, and a heating pad and three fishtank pumps. And another fan 14 inch 24x7. Let me know the cost?
how much does your lights cost??
like the LEDs and stuff?
 

Thundercat

Well-Known Member
I used to run 40-45 plants at a time under a single 1k hps in a 4x4 flood tray. I used clones that only got about 2 weeks of veg time so they were 6-8 inches tall going into flower. Averaged 20ish grams per plant with mixed genetic runs and 30ish g/per plant with mono crops of good strains.

So typically a full cycle turn around would be around 12-14 weeks including the veg time. And I’d yield 800-1200 premium dried grams(no popcorn buds) depending on strain.
 

WhiteThunderBoi

Active Member
I used to run 40-45 plants at a time under a single 1k hps in a 4x4 flood tray. I used clones that only got about 2 weeks of veg time so they were 6-8 inches tall going into flower. Averaged 20ish grams per plant with mixed genetic runs and 30ish g/per plant with mono crops of good strains.

So typically a full cycle turn around would be around 12-14 weeks including the veg time. And I’d yield 800-1200 premium dried grams(no popcorn buds) depending on strain.
this is what’s called the SOG method right?
6-8 inches is really short for a plant but considering they blossom 20G-ish is pretty impressive.. how many clones can you get from a Mother Plant?
I understand cutting the letting it grow again,but how does the process work in details?

Also,what medium do you use for the clones?
 
Top