Timber Owners Group.

Status
Not open for further replies.

FastFreddi

Well-Known Member
Update of the plants left under the Timber Fatty VS.

Two Dragon Funk photos and the Lemon Auto in the back while been axed today.
View attachment 4846584

DF3 View attachment 4846585
DF6 View attachment 4846586

High frost and resin level
View attachment 4846587

Hope everyone is well!
I love the Timbers...I'm getting better lower bud development now than I ever did with hps....just fantastic lights.
Those juicy...couple of mine...getting chopped anytime now.
Screenshot_20210307-060018_Gallery.jpg
Screenshot_20210307-071919_Gallery.jpg
Screenshot_20210307-060103_Gallery.jpg
20210306_200210.jpg
FF
 

RainDan

Well-Known Member
@RainDan , hey man, do you know if I'm able to remote mount my drivers on my 4vs, and if so, do you make patch cords to do that?
Hello @Hollatchaboy

Yes, absolutely. Please send us an email at [email protected] and we can assist. They are basically the same as the remote mounting cable that we offer with the Daisies, exception being you will require (2) - one for each driver. We can custom cut them to you specific length needs - let us know how to help.

Have a good day,
Dan
 

Hollatchaboy

Well-Known Member
Hello @Hollatchaboy

Yes, absolutely. Please send us an email at [email protected] and we can assist. They are basically the same as the remote mounting cable that we offer with the Daisies, exception being you will require (2) - one for each driver. We can custom cut them to you specific length needs - let us know how to help.

Have a good day,
Dan
Cool @RainDan, I'm on the road right now but I'll be home Friday. I'll measure out what I need and I'll be contacting you guys. Thanks for the help! :bigjoint:
 

race winslow

Well-Known Member
I decided to take my Fatty up a notch for the flowering phase. I purchased one of these Solacure UVA/B kits to attach to my fixture.

Kit: Two Flower Power bulbs + 2 fixtures (4 ft) + Timer (solacure.com)

Don't get me wrong, I'm very satisfied with the results from the Fatty. However, I just wanted to see if it could be even better with added true UVA/B designed for bud. I'm in early veg on this photo period grow and won't be using this until several weeks from now when it goes into flower.

The kit was easy to attach with zip ties. I'm hoping for added potency and frostier bag appeal.PXL_20210309_010713386.jpgPXL_20210309_010557926.jpgPXL_20210309_010705802.jpg
 

Hollatchaboy

Well-Known Member
I decided to take my Fatty up a notch for the flowering phase. I purchased one of these Solacure UVA/B kits to attach to my fixture.

Kit: Two Flower Power bulbs + 2 fixtures (4 ft) + Timer (solacure.com)

Don't get me wrong, I'm very satisfied with the results from the Fatty. However, I just wanted to see if it could be even better with added true UVA/B designed for bud. I'm in early veg on this photo period grow and won't be using this until several weeks from now when it goes into flower.

The kit was easy to attach with zip ties. I'm hoping for added potency and frostier bag appeal.View attachment 4847998View attachment 4847996View attachment 4847997
Let us know what you think. I've been curious about using uv myself.
 

Flatrate

Well-Known Member
Wow, lot of good looking lights and plants going on in this thread, happy to see some new owners too! I really don't have any beauty shots to show off, but I got some gear from Clearwater ramping up under my Fatty VS. The right side in on day 6 of flower, the left side just got added two days ago.

tn_IMG_1033.JPG

tn_IMG_1034.JPG
 

race winslow

Well-Known Member
Hello timber squad , I got the fatty VS 3500K spectrum based on flatrate and renfro recommendation.

question: do you guys use the Timber Fatty VS at seedling stage ? right now I have a sf2000 dimmed down to a 1/3 . Should I turned off my sf2000 , raise my fatty vs to 36” and run it on. 1/4 strength?


two the the seedlings we’re curling up , I think I overfed the nutrients , PPM was 650 , I drained out 5 gallons out of the res , then replaced with plain RO water , ppm is now 440 . Should I lower the ppl more ?
Did this grow finish up yet? If so, were you happy with the results?
 

race winslow

Well-Known Member
Getting closer to finish, can't wait!

Timber:hump:

View attachment 4868473

View attachment 4868476
Getting nice and frosty for you. What are the strains? Are you going to flush them? I noticed that even though I grew in RDWC the nitrogen was a bit stubborn about leaving the plants. I ended running Flawless Finish and plain water for the last 10 days. That worked for me and produced a nice clean gray ash and excellent terpene presence.
 

twentyeight.threefive

Well-Known Member
Getting nice and frosty for you. What are the strains? Are you going to flush them? I noticed that even though I grew in RDWC the nitrogen was a bit stubborn about leaving the plants. I ended running Flawless Finish and plain water for the last 10 days. That worked for me and produced a nice clean gray ash and excellent terpene presence.
They are two phenos of the same Dragon Funk strain by Noble Genetics. It's a cross of two Bohdi strains, Granola Funk x Dragon Fruit #7.

Flushing is bro science, so no I won't be. I feed until harvest.
 

My Name is Mike

Well-Known Member
Just added my 200w timber setup I bought 2 years ago to my 3vl in a 4x2. Should be pushing around 530w together. I stopped using my original grow cab due to its size so it was collecting dust. I'll update to see the difference.
 

greent1

Active Member
If I wanted to put the Cypress 8 in a 5 x 5 tent, what other lights would I have to add to it? Because I see on their site that the 8 is good from veg to flower in a 4 x 4. Could I put the Cypress 8 and the Cypress 3 in a 5x5 tent?
 
Status
Not open for further replies.
Top