Which driver for LED?

[Pmurp]

New grower, my LED knowledge is extremely limited. If there’s a thread you know like LEDs For Dummies I’d appreciate that too. But I’m looking to upgrade my current light (300w viparspectra) to HLG QB96 elite V2. My grow space is pretty limited since it’s a cabinet grow, but these lights are so small but pack such a punch. I’d only be using one
Board, But not sure about which driver I would use.
I’d like to make it dimmable since my space is limited.

Not sure if the HLG-80H-54a would do the trick?

 

[Budzbuddha]

It would run a single.

@Stephenj37826 can help you. He is HLG.

 

[guitarguy10]

There's a list of some compatible drivers on their product page here:

QB96 Elite V2 Engine

QB96 Elite V2 is a white LED Board with boosted red spectrum. Each Board is powered by 64 high power white LED, 16 630nm Red LED and 16 660nm Deep Red LED.

www.horticulturelightinggroup.ca

In case that helps, the board you mentioned should work for a single board.

 

[guitarguy10]

Just don't forget that there are some other small items you'll need, including 2-way and 3-way wago connectors, a waterproof junction box (for the AC side of the driver), some 16-18 gauge wire (anything thicker won't fit into the boards molex connectors, so learn from my mistakes lol), a power cable and something to make a frame and hold the board (I used 3/4" aluminum angle).

 

[Stephenj37826]

New grower, my LED knowledge is extremely limited. If there’s a thread you know like LEDs For Dummies I’d appreciate that too. But I’m looking to upgrade my current light (300w viparspectra) to HLG QB96 elite V2. My grow space is pretty limited since it’s a cabinet grow, but these lights are so small but pack such a punch. I’d only be using one
Board, But not sure about which driver I would use.
I’d like to make it dimmable since my space is limited.

Not sure if the HLG-80H-54a would do the trick?

Yes it will work.