The Best Deals Thread. Post Best Deals And Lowest Prices Links

Hollatchaboy

Hollatchaboy

Well-Known Member
Marq1340 said:
You said yours comes Monday right?


The moving rails/adhesive thing was maybe the worse for me. I bump my Sunraise lights each time I open my tent:lol:, so I would need to fix the rails often using the SZHLUX. Funny the difference a couple of screws could have made.
Click to expand...
Yep. That's what tracking says at least. I just need another light for my moms tent. Depending on how it does, it might be used for more than that. I'm not getting my hopes up though.
 
Tracker

Tracker

Well-Known Member
Hollatchaboy said:
If it looks somewhat waterproof, and wired well.
Click to expand...
The emitting surfaces of the light bars are protected by clear plastic shields. I did not mention in my review that the clear shields have some protective film on them that is kind of a bitch to remove. The protective shields on the light bars are not really tightly fitted in place by a seal. Although they will protect from little splashes, you should try to avoid splashing as much as possible. The wires from the lights bars connecting at the outer wall of the switch housing rail have connectors with threaded shields of the type that are splash resistant. Overall, I did not see a problem with the wiring. The wire job didn't look bad on mine, but I wouldn't call it "waterproof".
 
Tracker

Tracker

Well-Known Member
Marq1340 said:
Thorough review. Great job @Tracker!! Sucks that the build quality didn't live up to the pictures on Amazon. You should leave them a review, give their team something to work towards moving forward.

Currently debating if I want to keep it or post it to Facebook market now.
Click to expand...
I'll leave a review on Amazon when I get around to it. I'll probably put this light over a little indoor herb garden at my abuelita's house.
 
Hollatchaboy

Hollatchaboy

Well-Known Member
Tracker said:
The emitting surfaces of the light bars are protected by clear plastic shields. I did not mention in my review that the clear shields have some protective film on them that is kind of a bitch to remove. The protective shields on the light bars are not really tightly fitted in place by a seal. Although they will protect from little splashes, you should try to avoid splashing as much as possible. The wires from the lights bars connecting at the outer wall of the switch housing rail have connectors with threaded shields of the type that are splash resistant. Overall, I did not see a problem with the wiring. The wire job didn't look bad on mine, but I wouldn't call it "waterproof".
Click to expand...
I'll put it to the test. At least maybe it'll supplement my sf1000.
 
Hollatchaboy

Hollatchaboy

Well-Known Member
Well my light came early! Packaging was good. The build quality isn't all bad. Mines pretty sturdy, and there's no sliding on mine that I can notice. Plugged it in and it's bright! I can't put it in the tent yet because it's lights out, but I'll have more after I get it hung.
 
Moabfighter

Moabfighter

Well-Known Member
If anyone sees any must have tent deals let me know.... I need a 2x4 ideally I guess. My grow room is down for now so I gotta be stealthy while electrician does work, and 3ft or bigger won’t fit through doors to easily move around. I have some 4x4s but can’t put those up for now. Thanks.
 
Tracker

Tracker

Well-Known Member
Hollatchaboy said:
Well my light came early! Packaging was good. The build quality isn't all bad. Mines pretty sturdy, and there's no sliding on mine that I can notice. Plugged it in and it's bright! I can't put it in the tent yet because it's lights out, but I'll have more after I get it hung.
Click to expand...
Yo Holla, does yours not wiggle around like the light bars aren't fitted in place super securely? You don't get any sliding around or wobbling from side to side?
 
Tracker

Tracker

Well-Known Member
Moabfighter said:
If anyone sees any must have tent deals let me know.... I need a 2x4 ideally I guess. My grow room is down for now so I gotta be stealthy while electrician does work, and 3ft or bigger won’t fit through doors to easily move around. I have some 4x4s but can’t put those up for now. Thanks.
Click to expand...
Hey @Marq1340 , have you got anything on tents? Any 2x4, 3x3, or 4x4? I know I see Gorilla stuff on growgreenmi.com all the time, but anything for the budget minded?
 
Hollatchaboy

Hollatchaboy

Well-Known Member
Tracker said:
Yo Holla, does yours not wiggle around like the light bars aren't fitted in place super securely? You don't get any sliding around or wobbling from side to side?
Click to expand...
No, mine stays stationary. I tried to upload a video but it says it's too large, and it's not the long. I gotta pic tho. I dunno if it helps. Did you say there was plastic on the strips? All of them?
 

Attachments

Tracker

Tracker

Well-Known Member
Hollatchaboy said:
No, mine stays stationary. I tried to upload a video but it says it's too large, and it's not the long. I gotta pic tho. I dunno if it helps. Did you say there was plastic on the strips? All of them?
Click to expand...
I uploaded my video to vimeo and posted the link to the vimeo vid in the review. It showed up as an embeded video.
 
Hollatchaboy

Hollatchaboy

Well-Known Member
Tracker said:
I should be receiving the 400w today. Hopefully it's of better construction than the 200w I received.
Click to expand...
I think mines alright. I haven't got it hung in place yet but so far, so good. I did notice this also....20210207_150221.jpg
I don't believe that's an ideal spectrum for flower.
 
You must log in or register to reply here.
Top