I hope it ends soon and the lawyer does a good job for you.I’m seeing the lawyer on February 2nd. One year to the day of my first surgery.
Random Jabber Jibber thread
- Thread starter mr sunshine
- Start date
mysunnyboy
Well-Known Member
I wonder if she can grow weed for me?
mobile.reuters.com
Makers of Sophia the robot plan mass rollout amid pandemic
"Social robots like me can take care of the sick or elderly," Sophia says as she conducts a tour of her lab in Hong Kong. "I can help communicate, give therapy and provide social stimulation, even in difficult situations."
Olive Drab Green
Well-Known Member
What seed banks are active and popular these days? I don’t really even care if it’s OCONUS, just as long as it ships discreet and not going to rip me off. Just planning for the future.
Good to see you here hun
manfredo
Well-Known Member
It's supposed to start here in the a.m. and snow all day here tomorrow too...I need to hit the grocery in the a.m. myself for a few basics...Luckily there's a store only a mile away. At least you guys are finally getting some moisture.
Singlemalt
Well-Known Member
Her back is nice but not structurally robust enough to carry those things thru life lol
Not her boobs
manfredo
Well-Known Member
In my studies here recently I found these inexpensive rosin plates that you can buy on Amazon and EBay for a few hundred, and then for less than that you can buy a press...So for under $400 you can be pressing large amounts of rosin.
Now I honestly have only done rosin once...can you believe it?? And that was about 3-4 years ago and I didn't like it because it was wayyyyyyy too strong. I was hardly smoking at all then due to anxiety and I took a massive rip
that about killed me...however I am back to being a fiend again, I am happy to report 
And then I found out rosin can arguably make the best vape "juice" too.
Before that I had been reading about the various other extraction methods, like QWET, and vacuum pumps, and various mixing agents that can be added to produce vape juice....like VG and PG....I didn't even know what Propylene Glycol or Vegetable Glycerin was a few days ago. So interesting!!
There's a shitload of information out there!! There's a ton of info right on this site! I see a few of you are old pros!
Brain overload....time to unwind with a little dry herb and some mind numbing TV, but I think I am going to put my chef/scientist cap on here soon and see what I can what up in the dungeon.
Oh, and I already make killer full melt bubble hash...I was reading about pressing that
Rosin Press Plate Kit 4"x7" Rosin Extractor 4 Heating Rods 10-20 Ton Hydraulic 865472885070 | eBay
Used for pressing oil, making rosin, and shaping the rosin. Light and durable 6061 aluminum is applied to the heating plate for excellent heat transfer, thus reaching a better working result. 【EASY TO OPERATE】- This rosin press plates 4 x 7 is set up already, move on to the hydraulic press, then...
www.ebay.com
Now I honestly have only done rosin once...can you believe it?? And that was about 3-4 years ago and I didn't like it because it was wayyyyyyy too strong. I was hardly smoking at all then due to anxiety and I took a massive rip
that about killed me...however I am back to being a fiend again, I am happy to report And then I found out rosin can arguably make the best vape "juice" too.
Before that I had been reading about the various other extraction methods, like QWET, and vacuum pumps, and various mixing agents that can be added to produce vape juice....like VG and PG....I didn't even know what Propylene Glycol or Vegetable Glycerin was a few days ago. So interesting!!
There's a shitload of information out there!! There's a ton of info right on this site! I see a few of you are old pros!
Homemade oil for my vape pen
What do you mean weak? Oh you mean simmering in the blend! Ya it your right it would not be potent. I could just use them in the QWET process, then evaporate off the everclear. But first I’m cutting open the pucks to scrape out what is visible
www.rollitup.org
Brain overload....time to unwind with a little dry herb and some mind numbing TV, but I think I am going to put my chef/scientist cap on here soon and see what I can what up in the dungeon.
Oh, and I already make killer full melt bubble hash...I was reading about pressing that
ChingOwn
Well-Known Member
That's what I was trying to say, doesn't seem like whatever this are fit the frame
ChingOwn
Well-Known Member
In the walls of the house like Noriega
DarkWeb
Well-Known Member
Those were the plates I was thinking about. Add a 20 ton press and you're good.In my studies here recently I found these inexpensive rosin plates that you can buy on Amazon and EBay for a few hundred, and then for less than that you can buy a press...So for under $400 you can be pressing large amounts of rosin.
Rosin Press Plate Kit 4"x7" Rosin Extractor 4 Heating Rods 10-20 Ton Hydraulic 865472885070 | eBay
Used for pressing oil, making rosin, and shaping the rosin. Light and durable 6061 aluminum is applied to the heating plate for excellent heat transfer, thus reaching a better working result. 【EASY TO OPERATE】- This rosin press plates 4 x 7 is set up already, move on to the hydraulic press, then...www.ebay.com
Now I honestly have only done rosin once...can you believe it?? And that was about 3-4 years ago and I didn't like it because it was wayyyyyyy too strong. I was hardly smoking at all then due to anxiety and I took a massive rip
And then I found out rosin can arguably make the best vape "juice" too.
Before that I had been reading about the various other extraction methods, like QWET, and vacuum pumps, and various mixing agents that can be added to produce vape juice....like VG and PG....I didn't even know what Propylene Glycol or Vegetable Glycerin was a few days ago. So interesting!!
There's a shitload of information out there!! There's a ton of info right on this site! I see a few of you are old pros!
Homemade oil for my vape pen
What do you mean weak? Oh you mean simmering in the blend! Ya it your right it would not be potent. I could just use them in the QWET process, then evaporate off the everclear. But first I’m cutting open the pucks to scrape out what is visiblewww.rollitup.org
Brain overload....time to unwind with a little dry herb and some mind numbing TV, but I think I am going to put my chef/scientist cap on here soon and see what I can what up in the dungeon.
Oh, and I already make killer full melt bubble hash...I was reading about pressing that
Chunky Stool
Well-Known Member
Singlemalt
Well-Known Member
Yikes!! This will be 75% of yearly average in one fell swoop.
cannabineer
Ursus marijanus
The windstorm is over for now. Yesterday there were times of 40 sustained with gusts 50-plus. The good news is that my fence held.
Sunday morning.
Sunday evening.
Yesterday morning. Already windy (and snowy) in the gap.
Yesterday evening, wind 30 to 45 mph
Sunday morning.
Sunday evening.
Yesterday morning. Already windy (and snowy) in the gap.
Yesterday evening, wind 30 to 45 mph
Metasynth
Well-Known Member
Jesus, 7.3 inches on Wednesday alone?! I know we’re supposed to get a little of that down here, but shit, that’s a good amount of water falling outta the sky
Singlemalt
Well-Known Member
Yeah, I've lived here for 36 yr and never rained more than 3-4in in a day and those were rare
manfredo
Well-Known Member
Then I saw this....
Room Temperature 45L Centrifuge Extractor Kit
Cryogenic 45L Centrifuge Extractor Kit EXPECT 3-WEEK LEADTIME Cryogenic 45L Centrifuge Extractor Kit Overview: The BVV Cryogenic 45L Centrifuge Extractor Kit is a modular closed loop alcohol extraction system with low temperature extraction in mind. It features low temperature rated (-60°C)...
shopbvv.com