New 4x2x6 Grow

Prescott480

Active Member
I have 4 Seedsman seeds coming in tomorrow and at some point in the next few weeks going into a tent. So excited. To the point, looking for some general opinions on specifically either two Mars Hydro TS600s or two 250/300w hps/mh kits. Just keep researching back and forth so figured I'd see what y'all think. No wrong answers, go!
 
Last edited:

coreywebster

Well-Known Member
IMO the mars ts600s wont cover more than 1.5x1.5ft

If I were to pick a mars light for a 2x4 it would be the sp3000 which features far better diodes than the ts series.

Or what bob suggested.

Comes down to your wallet, if money is tight then 2x 250w hps for flower with mh bulbs for veg , if you can afford it 240-300w of Samsung or equal diodes.
 

Prescott480

Active Member
I'm at work, but I am reading everything. I was looking for light mitigation, but honestly I'm just looking for a single decent grow and then reinvest. I could wait for the better equipment in a couple months, but lose out on a lot of the learning. I am budgeting as well, but would like to learn more before investing more. I figure one good grow would be good enough. Currently thinking Cobs or hps/mh.
 

Prescott480

Active Member
Currently have 2 400w HPS/MH kits ready for purchase for lighting.
Have 4" inline fan @ 195 CFM for intake and a 6" @ 440 CFM for exhaust. Probably no filter. Any thoughts? Maybe more air movement on the intake?
 

Prescott480

Active Member
It can be on average of over 100 outside over here and can get upwards of 120 for the week. The area is not AC cooled, yet, so all cooling would pretty much come from the fans.
 

BobThe420Builder

Well-Known Member
Holly shit

I live on the surface of the sun but grow inside

But pushing and pulling hot air won't help

Be sure u have fans inside the grow area too

Good luck, those HPS light will easily add 10deg F of heat as well
 

Prescott480

Active Member
I can run the intake to cooler air. That will probably be my plan. Maybe I should go with a 6" or an 8" with a higher CFM and user a smaller on the exhaust.
 

Polyuro

Well-Known Member
Go with the 6" ac infinity T5 fan. It is controllable so you can run it at half power like a 4" but with hardly a sound. Very quiet.
 

GrassBurner

Well-Known Member
I run (4) qb120's in series in a 4x2x6 cabinet. Cost me around $250 for everything I needed to hang the light in the cabinet and make it work. No heat sinks required on the 120's. They seem to be working great, I'm a few weeks into flower. I couldn't find a cheaper route, especially not with the great reviews and awesome customer service.
 

Prescott480

Active Member
Tent should be here tomorrow and will update on ambient temps. I believe according to my research I should probably be able to get away with current lamps and lighting I have around for at least 3-4 more weeks. With this in mind I went ahead and ordered a 6" 440cfm inline fan. Figured buying smarter and on purpose might be a better idea so I will install the fan with what I currently have for lighting (about 300w worth) and work from there. Next update when tent arrives and after set up.
 

Prescott480

Active Member
Tent not here, but did have the 6" 440cfm Vivosun inline fan waiting. Moves tons of air. About as loud as I thought it would be, but still within reason for my area. Was really hoping to get the tent first, but will update when next change happens.
 

Prescott480

Active Member
Tent rescheduled for delivery this Friday. Also ordered a Mars Hydro TS1000 that should be here within a week. Going with QB this time as hear is my biggest enemy right now.

Also, thinking about going with a two plant grow and attempting to add a portable AC induce the tent and vent out through one of the outlets in the tent. Any thoughts or experiences with AC units and tents?
 
Top