if you was building your system again

[2cent]

If you was gona rebuild or setup another grow
Drain to waste with 8 pots.
Airports 30l . Coco perlite.


Would you diy build it your self
Or
Buy a system like the medusa or iws drain

I want the most efficiency from my plants and to take away the 3 water a day I do by hand in my left.


I find the medusa systems good but cant really find any other systems for sale

 

[rkymtnman]

this:

DIG Corp | T.O.P 12-Outlet (TOP)

www.digcorp.com

plus submersible pump, tubing and a timer and a reservoir.

done.

 

[2cent]

this:

DIG Corp | T.O.P 12-Outlet (TOP)

www.digcorp.com

plus submersible pump, tubing and a timer and a reservoir.

done.

Ok that's the ez bit.. feeding...

The runoff bits the balls

Currently 40cmnplant saucer on iws bases. With 19mm pipe plumbed to the saucer .
Airports on top and drains to a tub I empty by hand.

I want a tidyer system it works well but I want a clean tidy system . Atm it's doing my head in.
Think il buy a medusa system 8 pot.
And some plastic maze tops plates to spread the water current

 

[rkymtnman]

Airports on top and drains to a tub I empty by hand.

if you want to get fancy, a submersible sump pump with float switch in the waste tub. to a garden hose to a sink or drain or outside even.

i plumbed my whole system to a floor drain that is next to my hot water heater.

 

[2cent]

if you want to get fancy, a submersible sump pump with float switch in the waste tub. to a garden hose to a sink or drain or outside even.

i plumbed my whole system to a floor drain that is next to my hot water heater.

Any pics? Inspire me lol

 

[rkymtnman]

Any pics? Inspire me lol

picture this: 2 27 gallon black/yellow home depot totes from my old RDWC setup up on cinder blocks. 2" PVC connected and then I ran a tee off to 1/2" pvc about 10 feet away thru a wall to the drain next to the water heater. it's all hidden behind the cinder blocks so a pic wouldn't help.

 

[2cent]

picture this: 2 27 gallon black/yellow home depot totes from my old RDWC setup up on cinder blocks. 2" PVC connected and then I ran a tee off to 1/2" pvc about 10 feet away thru a wall to the drain next to the water heater. it's all hidden behind the cinder blocks so a pic wouldn't help.

Cant you pick the mortar out and remove the bricks for me ? Or if I lend ya my concrete cutter would you cross section it ? Lol
Only joking helped alot gona lead down to boiler out the old flue pipe to gutter I think.

I like them medusa trays but 1 25mm pipe in the middle bottom screams blockage to me