Fragile's Flowers Rnd 2! New veg room RDWC from first clones.

fragileassassin

Well-Known Member
Its been a rough year, havent done much. Small thing messing around early in the year, but its been dry down there for most of the year.
Feeling better and getting back in the swing of things and im getting tired of having to dispensary surf again so its time to push back into it. Started seeds back in august.. forgot about them for several days a week in and killed them all LOL. Planted a few more of the same 2 strains and grew them out until I was fairly confident I had a female of each. Those 2 are in their own 27 gallon bubble box off to the side now, cut clones from them for what I have now. Debating if I want to flip them or just cut them down once the clones i have now are established enough to take a couple cuts from and restart the mothers.

Made a few improvements to a few things as I got ready.
Got the wire run for that controller box, just gotta get that swapped in the breaker panel.
Got myself a nice humidifier and heater. Now able to keep it 75F and above 40% down there even when its in the teens for both outside.
Whole new cloner setup. Ended up doing a little 30x18x36 tent with a 2ft 4 bulb T5 and a smaller tote. Had roots popping in a week!
and finally got the windows sealed up and insulated. Made a big difference.

Everything is cleaned and ready to go. Veg system is sanitized and ready for transplant once I get the ballasts in for my lights.
 

evn_420

Active Member
hey thanks for giving me advice on my post and directing me here! definitely tuned in to watch for updates i will be checking out your other thread next!
 

Rello365

Member
Feel free to post any comments or questions about my setup or grow!!
Please just keep it on topic and somehow related to this post and try to keep multiple points to one post. I am always open to feedback or questions.


Getting things set up for my 2nd crop and figure I'd start one of these things this time around.
Today I got my buckets in finally so things are starting to come together.

Have a bunch of my parts in and will need to get this together soon so I can get my clones out of the cloner! Trying to avoid the black Friday stuff so I'll probably have to wait a couple more days to get the rest of the PVC stuff for my water falls. They will be set up pretty much like the drains.

For this grow im building a new veg room in a 5x5x7 tent with 2x 4ft 8 bulb T5 lights and 3.5 gallon buckets.
I went with T5s for the heat! My LEDs in my big tent dont put out enough heat and I had a hard time keeping temps up during my first veg. These lights get pretty warm so it should help without being too hot. I have a full set of new 6500k HO bulbs on the way. Will keep them nice and low on the plants. I also got them will all good bulbs for $100 for the pair off a local seller. Couldn't pass that up, they're like $150 each new.

8" duct with a 700+ cfm fan are a bit overkill, but its adjustable and I already had all of it.

I will be building in a platform 18" tall for my buckets to sit on. My back isnt what it used to be, so getting them up off the ground some will be great when it's time to train. The drains from each bucket will go through the platform and connect underneath it.

I am considering not using a control bucket and doing just undercurrent, but I'm not 100% on this.

I use 6" net pots that fit on 5/3.5gallon buckets. I bought a case of 25 when I built the first system so it worked out perfect for this. The big system is 17 gallon totes with holes in the lids that fit the pots. So when I'm done veg I'll be able to just pick the hole net pot up off the buckets and just drop it in it's new home for flower.

I guess that's about it for now. This is what I have going so far, waiting on slow holiday shipping. Will update here as I get things done.
Clones are Bruce Banner, Skywalker OG, and some grape shit I have no idea what it is.
-Link to cloner build
https://www.rollitup.org/t/diy-cloner-looking-for-feedback.977305/


View attachment 4237657 View attachment 4237658 View attachment 4237659 View attachment 4237660
By you being in a basement you dont never worry about mold
 

Rello365

Member
Its a partially finished basement that doesn't leak, drip, or collect water and I live in a pretty dry climate to start with.
CO is a great place to grow lol
so if I grow up stairs and have just mold downstairs will it affect my grow even if I fix the water source in the basement and spray
 

Rello365

Member
Mold is something you need to eradicate, regardless of whats going on.
But how I found the source of water but mold spores should be everywhere in the basement I can't spray the whole basement i might can bleach the floors smh and i just move here been at this place a month and went into the basement and seen the mold on the bottom wall
 

fragileassassin

Well-Known Member
yeah i prepped my basement before I moved anything down into it. I bleached every inch of it and scrubbed it with a sponge mop then painted/sealed the floor.
I did a close inspection of the basement before I bought it to make sure there was no mold. Just some spider webs lol.
Mold needs to be taken care of asap either way. Its not good for your health either.
 

Rello365

Member
So I'm going to clean the shit out of that basement but I'm going to grow in a room that I got but hopefully if I take care the basement and my 4x4 tent is fitted for the right environment to grow I want have a problem with mold right and I'm also useing your method of rdwc with 3 27 gallon totes so I should be okay right
 

Rello365

Member
yeah i prepped my basement before I moved anything down into it. I bleached every inch of it and scrubbed it with a sponge mop then painted/sealed the floor.
I did a close inspection of the basement before I bought it to make sure there was no mold. Just some spider webs lol.
Mold needs to be taken care of asap either way. Its not good for your health either.
Also will it help to put a hepa air purifier in the grow room
 
Top