Is this strip wiring correct?

[tilopa]

About to wire my LED Strips and want to make sure I get it right.

I am wiring 15 2 foot strips per driver in a series of 3 set of 5, and then those 3 sets paralleled together. In other words 5 strips series together 3 times, and then those 3 sets of 5 in parallel.

My diagram is not the best, I needed to get this out there asap so through it together with Sketchup. Hope it is clear.

Thanks.

 

[Snob]

Electricity is so magic. That shit blows my mind.

 

[Airwalker16]

About to wire my LED Strips and want to make sure I get it right.

I am wiring 15 2 foot strips per driver in a series of 3 set of 5, and then those 3 sets paralleled together. In other words 5 strips series together 3 times, and then those 3 sets of 5 in parallel.

My diagram is not the best, I needed to get this out there asap so through it together with Sketchup. Hope it is clear.

Thanks.View attachment 4573517

Yes sir.
But do NOT use a fuckin wire nut. Please use a 5lever wago.

 

[1212ham]

About to wire my LED Strips and want to make sure I get it right.

I am wiring 15 2 foot strips per driver in a series of 3 set of 5, and then those 3 sets paralleled together. In other words 5 strips series together 3 times, and then those 3 sets of 5 in parallel.

My diagram is not the best, I needed to get this out there asap so through it together with Sketchup. Hope it is clear.

Thanks.View attachment 4573517

That configuration can function, but we can't say how well without knowing the driver and strips used. And there's nothing wrong with wire nuts, millions are used in commercial and residential wiring.

 

[Airwalker16]

Doesn't change the fact that wagos exist and do a much better, cleaner and safer job.

 

[tilopa]

I am using wagos, It was just easier to communicate "wire nut" in the diagram, for some reason. I bought a bunch of 5 lever because I originally had a different wiring config, but I only need 4 level. But I am used to wire nuts and they work just fine.

 

[tilopa]

That configuration can function, but we can't say how well without knowing the driver and strips used. And there's nothing wrong with wire nuts, millions are used in commercial and residential wiring.

Driver is HLG-320H-C2800A. Strips are EB Gen 3 2 foot - 19.1v average and 700mA nominal.

 

[1212ham]

Driver is HLG-320H-C2800A. Strips are EB Gen 3 2 foot - 19.1v average and 700mA nominal.

It will work fine, but only about 270 watts at the strips.

 

[Airwalker16]

I am using wagos, It was just easier to communicate "wire nut" in the diagram, for some reason. I bought a bunch of 5 lever because I originally had a different wiring config, but I only need 4 level. But I am used to wire nuts and they work just fine.

WAGO® brand lever nuts come in 2,3, & 5. Anything else you see is a counterfeit.