SCROG idea for DWC

[KoolaidMan]

While browsing tons of threads I have seen many people asking how to SCROG a DWC bucket and some people posting ideas. Here is something I came up with using 1/2” pvc. Only thing left to do is place some metal grid panel on top for the “net”. This attaches to the lid and allows you to lift the lid up with the SCROG as one piece using the side handles. The square is 2’ x 2’. This places the SCROG about 5” above the base, perfect for a 4-way LST plant if starting around nodes 3-5

Everything is 1/2” Schd 40

Supplies:
•about 20’ of 1/2”
•12x T’s
•4x 5-way crosses
•8x 3-way corners
•4x elbows
•4x caps
•4x conduit saddles with stainless hardware.

 

[Just Be]

That's f'ing awesome!

 

[KoolaidMan]

That's f'ing awesome!

thanks, I wanted something I could lift with the lid for doing res changes. This ideas satisfies that need. Should work out good! I will post a pic when I get the net on.

 

[Just Be]

thanks, I wanted something I could lift with the lid for doing res changes. This ideas satisfies that need. Should work out good! I will post a pic when I get the net on.

Yeah, definitely reply back here or tag me when you have it set up. I'm actually trying to come up with something similar for the top chamber of a General Hydroponics PowerGrower which has three 'staking points' available for inserting lengths of PVC. It actually has six but the other three are at the bottom of the chamber.

 

[KoolaidMan]

Hmm, I would build something like this using some 45 degree elbows and T fittings.

 

[mytwhyt]

This was my attempt to make a 5 gal bucket scrog screen support.. Also works on a 8" basket lid..

Hydro Newb looking for help with DIY build

Okay Hydrophiliacs, after a couple of successful soil grows – first with Jack's Classic, then with organics only – I find myself wanting to give hydro a try. I'm a dedicated, frugal DIYer, so buying a pre-fab setup is not part of the equation. I'm looking for advice on putting together a 3-4...

www.rollitup.org