First hydro what am I doing wrong

fessie99

Active Member
Looks like I am in full flower which is good because I screwed up again like 5 days ago and ran a 16 hr lights on they do seem to be taking sugar and water fastIMG_20200509_091814.jpgIMG_20200509_091653.jpgIMG_20200508_123015.jpg
 

fessie99

Active Member
Sorry guys I'll try not to do that again trying to get my light schedule precise they don't come on or go out at same time and rocks are wet because once they dry I drizzle terpenez per instructions just to wet them and let them dry I use a sprayer and let it come out slow I also top dress with Aurora lbs
 

Homie Da Clown

Well-Known Member
Sorry guys I'll try not to do that again trying to get my light schedule precise they don't come on or go out at same time and rocks are wet because once they dry I drizzle terpenez per instructions just to wet them and let them dry I use a sprayer and let it come out slow I also top dress with Aurora lbs
Do u not have a timer bro? Fuck if you don’t I send you one! I would hate for you to mess up your crop!! A timer is essential

Top dress is all good. I just wanted to make sure it is not always wet. I’ve seen some peculiar stuff before when the main apical stem stays to wet and moist and for some reason, allows stem rot to set in. Now I’m not saying you show that, I’m just saying, I’ve seen issues. Usually in just rooted clones but nevertheless.
 

fessie99

Active Member
Do u not have a timer bro? Fuck if you don’t I send you one! I would hate for you to mess up your crop!! A timer is essential

Top dress is all good. I just wanted to make sure it is not always wet. I’ve seen some peculiar stuff before when the main apical stem stays to wet and moist and for some reason, allows stem rot to set in. Now I’m not saying you show that, I’m just saying, I’ve seen issues. Usually in just rooted clones but nevertheless.
Sweet thanks problem with lights is timers are not high dollar enough to keep correct time my light schedule is 12/12 far reds come on 5 min later rspecs come on 55 min later cmhs come on then one hour before high noon pure uv comes on for 2 hrs and reverse at end of day cmhs only run 10 hrs a day
 

fessie99

Active Member
Deep reds did not turn on in time this morning rspecs popped on first stupid cheap timers it's all good though 12 hr ten minutes dark and I am dialing in so should mess up again sorry community
 

MisterKister

Well-Known Member
Sweet thanks problem with lights is timers are not high dollar enough to keep correct time my light schedule is 12/12 far reds come on 5 min later rspecs come on 55 min later cmhs come on then one hour before high noon pure uv comes on for 2 hrs and reverse at end of day cmhs only run 10 hrs a day
Ok so you need 4 timers then.. it's not to hard to figure out.
 

Twokz

Member
Bro u were doing good. What do you feel happened? I use an ebb and flow system too. Been using it for a couple years now. It’s the easiest thing I’ve ever used besides maybe DTW in coco.

What nutrients u using?
Sorry don’t know shit about the ext from r video. I think you have to make like a YouTube channel and put the video there and then put a link here on your grow log.

View attachment 4529969View attachment 4529970View attachment 4529971
Awesome
 

fessie99

Active Member
Ok so you need 4 timers then.. it's not to hard to figure out.
I have four timers problem is they are not high dollar and sometimes when a light is supposed to come on 5 min before everything else they don't because mechanical switch pressure holds the time back a little but only sometimes other times they work as they should just a poor man when I can afford higher dollar stuff I'll get it or if they aren't all that expensive I'll pick 4 up just don't know exactly what I have to buy going through personal shit to so sometimes I just don't have the time to research
 

Homie Da Clown

Well-Known Member
I have four timers problem is they are not high dollar and sometimes when a light is supposed to come on 5 min before everything else they don't because mechanical switch pressure holds the time back a little but only sometimes other times they work as they should just a poor man when I can afford higher dollar stuff I'll get it or if they aren't all that expensive I'll pick 4 up just don't know exactly what I have to buy going through personal shit to so sometimes I just don't have the time to research
Well the timers I have are all cheap timers. And they have fucked up before.
These days I use a 8 plug 240 watt light light controller, as well as a Autopilot that controls everything else. They were not cheap, but I don’t like to worry. Every crop, replace one thing, or upgrade one thing. It’s a slow process, but in time you will gather up some much needed stuff. 5 years in my grow room and I just bought my first mini-split.
One thing I did, was started working on my credit at the same time. As time went on, I got some credit with overstock, and Fingerhut. I used them to only get needed stuff to get my first grow in. Paid them off at harvest.
I get why you are doing your lights the way you are. I think I could rearrange your lights, methods, and bring you more bud for less electricity. But first we need to get this run done, and start preparing you for your next.
 

MisterKister

Well-Known Member
Well the timers I have are all cheap timers. And they have fucked up before.
These days I use a 8 plug 240 watt light light controller, as well as a Autopilot that controls everything else. They were not cheap, but I don’t like to worry. Every crop, replace one thing, or upgrade one thing. It’s a slow process, but in time you will gather up some much needed stuff. 5 years in my grow room and I just bought my first mini-split.
One thing I did, was started working on my credit at the same time. As time went on, I got some credit with overstock, and Fingerhut. I used them to only get needed stuff to get my first grow in. Paid them off at harvest.
I get why you are doing your lights the way you are. I think I could rearrange your lights, methods, and bring you more bud for less electricity. But first we need to get this run done, and start preparing you for your next.
What did you get from fingerhut? I just opened an account with them so I'm curious.
 

fessie99

Active Member
Vpd numbers are getting good finally got heat up lights all the way up helping warm cold walls did some training and they are starting to drop indicas are coming on I think I will get my numbers here are some pics homie do you think 1095 watts is too much for 8x4IMG_20200510_192317.jpgIMG_20200510_174942.jpgIMG_20200510_174633.jpgIMG_20200510_154458.jpgIMG_20200510_152911.jpg
 
Top