Aeroponic cloning

As permitted by water temperature.
Let it run and watch your water temps. Use a timer to cycle it on and off as needed to not heat your cloner. With the cheap pump I used in mine I have to run it 15/15.
If I were to replace that pump with the same dc pump I put on my other box, I'm confident I could run it 24/7
 
As permitted by water temperature.
Let it run and watch your water temps. Use a timer to cycle it on and off as needed to not heat your cloner. With the cheap pump I used in mine I have to run it 15/15.
If I were to replace that pump with the same dc pump I put on my other box, I'm confident I could run it 24/7
BTW homie, the PVC "collars" are working so much better than I eve4lr could've hoped for.
 
Beautiful.

I don't doubt for a minute that 24/7 works great. But it truly depends on how low you can keep your water temps. Some can't get that dailed in, so the rest that the pump gets helps with keeping water temps low(er)
 
Last edited:
Awesome roots...I have been experimenting with pool shock, and had pretty good success my first run. I lost a few as my temps were a little high. But nothing but RO water and pool shock.
 
Those are nice looking clones. What's your environment like (res/ambient temp, humidity)? Do you just use pH water in your res, or do you add anything beyond that?
Im lucky with my environment, I live a couple blocks from the beach in So Cal.
I just use non PH'ed tap water, no hormones. I have used KLN & Pro TekT @ 5ml per 3gal rez in the past, but I've notice no difference without.
As for temps, I don't do any control, it's whatever the weather gives me.
I use a Cone King, T5's @ about 16"
 
Back
Top