Noob Lighting Set Up

S

simmadawna

Member
Hi this is my first post. I've been spending the last two weeks reading like crazy on this forum. The knowledge here is insurmountable.

I'd like to do 1-2 non-auto northern lights in a 2x2x4. I'm going with this lighting set up:

1- QB288 Quantum Board V2 (LM301B) - 3000K
1- Slate 1 Heatsink for Quantum Board
1 - MeanWell HLG-120H-48A Driver (I noticed HLG uses the 54a for their driver, will this make a noticeable difference?)

Is this enough juice? Thanks!
 
coreywebster

coreywebster

Well-Known Member
That driver has a range of 43v-53v and that board to get 120w will be 49v so it will work.

Or if you haven't bought the driver you could use a meanwell XLG-150-h-ab which is cheaper ,smaller and lighter and will give you more juice if you want it.



QB288 V2 & V2 Rspec Board Guide

High efficiency boards designed for Horticulture Lighting projects. No Thermal Interface Material is required between the QB board and flat metal heatsink.
horticulturelightinggroup.com horticulturelightinggroup.com
 
Last edited:
S

simmadawna

Member
coreywebster said:
That driver has a range of 43v-53v and that board to get 120w will be 49v so it will work.

Or if you haven't bought the driver you could use a meanwell XLG-150-h-ab which is cheaper ,smaller and lighter and will give you more juice if you want it.



QB288 V2 & V2 Rspec Board Guide

High efficiency boards designed for Horticulture Lighting projects. No Thermal Interface Material is required between the QB board and flat metal heatsink.
horticulturelightinggroup.com horticulturelightinggroup.com
Click to expand...
Thank you!
 
Barristan Whitebeard

Barristan Whitebeard

Well-Known Member
simmadawna said:
Hi this is my first post. I've been spending the last two weeks reading like crazy on this forum. The knowledge here is insurmountable.

I'd like to do 1-2 non-auto northern lights in a 2x2x4. I'm going with this lighting set up:

1- QB288 Quantum Board V2 (LM301B) - 3000K
1- Slate 1 Heatsink for Quantum Board
1 - MeanWell HLG-120H-48A Driver (I noticed HLG uses the 54a for their driver, will this make a noticeable difference?)

Is this enough juice? Thanks!
Click to expand...
Hey man, are you buying these components through Cobkits? I don't know if he has any Slate 2 heatsinks available, but the Slate 1 heatsink is only recommended for up to 100 watts.
 
You must log in or register to reply here.
Top