Some of these look a bit strange, anything to worry about ?

[jonnylongton]

Good day to everyone of here, hope youre well, and Staying Safe from this Virus.

Anyhow id be very appreciate if i could get a bit of feedback on my plants please.

Just starting week 7 and most look ok , i think , please tell me otherwise , oh and if you think they look ok for the age of them.

But a couple of plants seem to be developing like a pistel thin ness at the top of the bud. Is this supposed to happen? as i dont see it on most of the plants.

Using 60/40 Coco
IWS System - Feed 2 times a day, once for 15 mins before lights out, and one for 30 mins a hour after lights on
EC 1.3-1.5
Ph 6.0
Temp 24.5
Humidity 40
Use Shogun full range of Nutrients
3 x 600 watt HPS Lights on at the overdrive part after the 600 watt point on the digital ballast.

Dont know if any more information is needed. Some of the pics were taken just after lights out , and some with lights on, and the ones with the lights on show on certain plants what i mean. Sorry to be a nuisance again. But dont even know how to describe it to type into google. So id be extemely grateful if you had a good study , its mainly on the main Cola it is happening, and also some of the top leaves seem to be a different shape, and are slightly curling. Thank you for your time and patience . I think it will be pic 2 and 3 which highlights what ive trying to describe .Stay safe All ..

regards

 

[jondamon]

The pics you’re highlighting look like the plant is revegging.

Have you got any disruptions to the dark cycle on your timer?

Any light leaks in your area?

This can also be caused by high heat. Plants too close to the lighting?


Other than this they look pretty healthy.

 

[instg8ter]

Watch for plants herming, can show late if stressed or light leaks. Don’t want to pollinate all those juicy colas

 

[jonnylongton]

The pics you’re highlighting look like the plant is revegging.

Have you got any disruptions to the dark cycle on your timer?

Any light leaks in your area?

This can also be caused by high heat. Plants too close to the lighting?


Other than this they look pretty healthy.

No mate, the room is more or less totally blacked out, apart from a little hold for wires to go through. I will go and light the lighting, but the heating is perfect at the moment. I will double check the light times to see if they are getting exactly 12 hours, which im sure they are , but no harm in checking. Thank you so much for your help @jondamon , and thank you for your kind comment on saying they look quite healthy.

 

[jonnylongton]

Watch for plants herming, can show late if stressed or light leaks. Don’t want to pollinate all those juicy colas

@instg8ter how do i stop herming if it is that mate and dont want to pollinate any other plants. All the readings and nutrients are right, and temperature is like, it drops a bit at night as i went in one day a few mins early and it the dark it was 16 degress and i know it should be 20 degrees. Dont think apart from a little corner where light could escape from, and this hole is at the opposite side of the room, and outside where the hole is, is dark there anyway. Even the door has got black bags covering all the openings , i look for light coming out when the lights are on, and i dont see any. Im getting a bit worried now with it being so close to the end.. They could of been stressed by being stripped of bigger leaves but i only took the leaves which were covering bud sites mate.

 

[instg8ter]

Quarantine the plant from other or snip off offending bud or just cut that one early and cure it, it will still smoke, may be a little racy biz if it’s a Sativa cross.

 

[jonnylongton]

Nice one @instg8ter mate. i think its happened to another as well. Is it deff an hermes mate. Here are a couple of pics of outside the room when lights are on, and no light getting out so none getting in mate. So you can see the door no light, and all along the top and sides no light, im really confused how this started, oh ive lifted the lights incase this was causeing it mate. Im just fretting a bit mate, as ive got no where to put the offending plant and how to cure it mate. Thank you very much for your advice mate

 

[CannaCountry]

An ill working timer will cause these same issues without a light leak. The mechanical timers have little pegs that are pushed in or pulled out to set the timer...these sometimes break inside, causing the timer to turn off or on at the wrong times. I would check to be sure it's working correctly through out its cycle. Good luck.

 

[TreeFarmerCharlie]

Make sure you don’t have any electronics in there, or power strips, that have indicator lights on them. If they have any bright indicator lights then you will need to black them out somehow.

 

[jonnylongton]

An ill working timer will cause these same issues without a light leak. The mechanical timers have little pegs that are pushed in or pulled out to set the timer...these sometimes break inside, causing the timer to turn off or on at the wrong times. I would check to be sure it's working correctly through out its cycle. Good luck.

Hi @CannaCountry , thank you so much for your valued advice. Mine are like the timers you have described mate, and first thing i did was went down to the light timer and checked it, and the times the little pegs were still set to 12 hours on and off. Also checked the timer on the brain, as i know these can sometimes lose time, or a slight knock against them and about 5-6 all pop out and it feeds for nearly 2 hours, i did do it once way back in week 3 of veg. But the timer is set right, to feed a hour after lights come on, and a hour before lights go off. Its thanks to reading a post like yours when i joined that kept in my mind mate, if i hadnt of seen that the first thing id be doing now is checking. Thank you vrry much for your advice. time, trouble mate. Stay safe. Regards...

 

[jonnylongton]

Make sure you don’t have any electronics in there, or power strips, that have indicator lights on them. If they have any bright indicator lights then you will need to black them out somehow.

@TreeFarmerCharlie .Hi mate, thank you for the advice, i never gave that a thought to be honest. Great bit of advice, because i use a LED Trimeter, which tells the PH, EC, and Water Temp. At the moment though since early last week its been back at the manufacturers as the EC probe wasnt working, only 4 month old , youd of thought the shop would of swapped it and sent it back to where they got it from, but no i had to take it to the shop with receipt and they sent it off to manufacturers to be checked, so at the moment i dont have any indicator lighting on at the moment, but when i eventually get the trimeter back i will see it gets covered.. Thank you for that mate