Airwalker16
Well-Known Member
Those hexagon lights are good lights man. 60watts a piece. So you've got 420. All those plus the bar light will do a 5X5 easy.
Center the SunBlaster and hang the hexagons in a circle around it.
Wtf led do i have
- Thread starter 2cent
- Start date
Center the SunBlaster and hang the hexagons in a circle around it.
2cent
Well-Known Member
You think the hexigon 420 will replace a 600hps in a 120x120 area?
And the 5 200w rectangles replace thr 600w on my other side 120x120?
Centre the hex and put the 200w rectanngles either side. So 400w 420w 400w on a 120x240
Or would i still need hps all or combo to bribg my yields up?
Im just worried i spend 3 month growing with them and dont hit my 35oz target still. With my 2x600 i always get 35-45 oz and id like to keep that lol. I do medical oil runs so i use quiet alot of bud aswel as smoking hehe
I csnt even workout what chips they are to see if there good or. CHeap china chips. Which given their companys colab i do doubt
Airwalker16
Well-Known Member
Dude the square light is a true 1000w? Or is each piece of 5 pull 40W, equalling 200w?
2cent
Well-Known Member
They are
50w per small rectangle. 4 to make up each 200w daisy. And x5 of that so 1000w total yeah
Got this x5
Attachments
Airwalker16
Well-Known Member
Wow. You've got a lot of light at your disposal. You can light up a 5X9 with that easily
2cent
Well-Known Member
Cool as shit. Am i able to figure out my ppfd?
Or what the chips are? Like ya said cree or what ever.
Alot of light yeah
but dya think 1200watt of these led at 2.1 apparent unol will kick the shit outa 1200w hps in this space then? Or just do good. Il be hanging my lights tomoros hehe stuck on this area of unknown lol so im trustin u guys knowin leds lol hang hps or led with my yield in mind
Airwalker16
Well-Known Member
Single ended HPS is like 1.5umol/jouleCool as shit. Am i able to figure out my ppfd?
Or what the chips are? Like ya said cree or what ever.
Alot of light yeah
Il be hanging my lights tomoros hehe stuck on this area of unknown lol so im trustin u guys knowin leds lol hang hps or led with my yield in mind
Airwalker16
Well-Known Member
@welight CREE J Series 5050s?
2cent
Well-Known Member
Or 3030s that link says it could be. There full spectrum including far red uv and green
So 1.5umol hps these at 2.1 i should hit alot more than the hps. Got a green line timer contactor 4000watt i use on me hps 6 socket anf 2 plugs. Will that be acceptable for the led also?
Next question is lense on or off?
I mean it also makes it waterproof so wud i need a glass screen? Or moisture wil get in over time
And wont it alter the colour mix and umol tested i read? It doesnt say if its changed the mix in a good or bad way
I see the pro or the reflector side instead of lense my main concern is there open to my elements.
And ofc messing up the colour mixes and umols i could reduce them? Or make them uneven unpredicable somewhat non unifor.?
Last edited:
welight
Well-Known Member
looks more like 3030 but hard to tell as the lens makes them look bigger
Barristan Whitebeard
Well-Known Member
That refers to the size of the diodes used, approximately 3.0 mm x 3.0mm each.
2cent
Well-Known Member
So 3030 leds.. Good company sellin commersialy only in europe and usa but dont know thw chips..
1200w of led
They still as he said gona smash my 1200w hps?
welight
Well-Known Member
Based on the image they appear to be Cree, however the only odd thing is the solder pads show a streak of solder coming out the centre of each led, but that may only be the underlying solder relief pad design. Without eyeballing it face to face I would say based on what I can see 90% chance its Cree J Series 3030
Airwalker16
Well-Known Member
Which is impressive to say the least that he got 1400watts of em for free eh?
@welight to me looks like 3000/3500K diodes too even. What say you on CCT?
Airwalker16
Well-Known Member
Man OP you got hooked the f up
Airwalker16
Well-Known Member
You got to completely delve into LED for free. I'm jealous. You even have 7 different 60w lights plus the 5 200w ones. You could do any size area up to a 5X9.
Those are still VERY GOOD tech Diodes and you're so lucky they're the right Color for flowering. Most lights people cop for free are almost always 5000K and more blue.
2cent
Well-Known Member
Man i am shaking lol i am shaking to fkk
Wooo u guys are the best seriously. If i could give u a smoke id bloody have a sesh lol.
I will be making a grow diary with my 5000lph spraybar 250litre rdwc no airstones just 22 recircs
Feeding dinafems cheese and quick gorilla in a scrogg screen. And full led spread mmmmm
And il be doing a coco airpot of quick also as i am thinking to do a coco quickgor room in controll under a 1200w just for shits n giggles at my friends house n compare smoke tase n yields
Got all bits start building monday will pit build pics up gettin excited now.
Wooo u guys are the best seriously. If i could give u a smoke id bloody have a sesh lol.
I will be making a grow diary with my 5000lph spraybar 250litre rdwc no airstones just 22 recircs
Feeding dinafems cheese and quick gorilla in a scrogg screen. And full led spread mmmmm
And il be doing a coco airpot of quick also as i am thinking to do a coco quickgor room in controll under a 1200w just for shits n giggles at my friends house n compare smoke tase n yields
Got all bits start building monday will pit build pics up gettin excited now.
fragileassassin
Well-Known Member
Glad someone was able to get a little more info. I thought they looked promising.
Looking forward to seeing what you do with them.
It costs most people over a grand to get near that kind of led wattage. I was at nearly 1400 to get 1280w
Looking forward to seeing what you do with them.
It costs most people over a grand to get near that kind of led wattage. I was at nearly 1400 to get 1280w