Maximising yield in a commercial grow

S

SamWE19

Well-Known Member
Renfro said:
FWIW I buy it in rolls that are either 4 foot or 6.5 foot wide x 3280 foot long.
Click to expand...
What’s your opinion on it? Is it a lot better than any fencing mesh?

It doesn’t look like I have a local supplier. I’ll have to contact someone on eBay selling in California and see if they will ship the 5000 miles to me by the looks of it. Wondering if it’s worth that
 
H

HashBucket

Well-Known Member
Renfro said:
FWIW I buy it in rolls that are either 4 foot or 6.5 foot wide x 3280 foot long.
Click to expand...
I hate that stuff (horti trellis) and use it a lot
Gets all tangled up on your feet, arms ... can end up all tied up.
Keep waiting for wifey to get subdued by the stuff so I can have my way with her. Hasn't happened yet.

I used to use hog-wire. Had frames made of PVC, and they'd just set up over the plants. Easy to deal with, the plants and flowers didn't grow up all in it.
 
trapdevil

trapdevil

Well-Known Member
HashBucket said:
I hate that stuff (horti trellis) and use it a lot
Gets all tangled up on your feet, arms ... can end up all tied up.
Keep waiting for wifey to get subdued by the stuff so I can have my way with her. Hasn't happened yet.

I used to use hog-wire. Had frames made of PVC, and they'd just set up over the plants. Easy to deal with, the plants and flowers didn't grow up all in it.
Click to expand...
with what was posted in that other thread, be careful saying that;)
@BigHornBuds lol
 
Renfro

Renfro

Well-Known Member
HashBucket said:
Keep waiting for wifey to get subdued by the stuff so I can have my way with her. Hasn't happened yet.
Click to expand...
Sounds like she has a better chance of getting you all tied up in submission. lol

I never have a problem with the stuff. I have to put up a lot each run because I just cut it now at harvest.
 
S

SamWE19

Well-Known Member
Renfro said:
Sounds like she has a better chance of getting you all tied up in submission. lol

I never have a problem with the stuff. I have to put up a lot each run because I just cut it now at harvest.
Click to expand...
Thanks for posting the name of that stuff, managed to find a long roll of pvc plastic mesh stuff with 6 inch holes for pennies... in comparison to the mesh fencing I was going to use by searching for that horti trellis.

Bad picture but does this stuff look similar to horti trellis? The holes don’t seem to be perfect squares but I guess that doesn’t matter too much
 

Attachments

Renfro

Renfro

Well-Known Member
SamWE19 said:
Thanks for posting the name of that stuff, managed to find a long roll of pvc plastic mesh stuff with 6 inch holes for pennies... in comparison to the mesh fencing I was going to use by searching for that horti trellis.

Bad picture but does this stuff look similar to horti trellis? The holes don’t seem to be perfect squares but I guess that doesn’t matter too much
Click to expand...
No clue about that stuff but I do know to avoid the stuff thats made of string, it's very stretchy and it leaves fibers in your weed.
 
S

SamWE19

Well-Known Member
Renfro said:
No clue about that stuff but I do know to avoid the stuff thats made of string, it's very stretchy and it leaves fibers in your weed.
Click to expand...
When you say you were getting 20g per plant with 4 per sqft was that with co2? And yield completely maxed out or did you still have room for improvement? 3 oz per sqft is like 3lb per light if using hps
 
Renfro

Renfro

Well-Known Member
SamWE19 said:
When you say you were getting 20g per plant with 4 per sqft was that with co2? And yield completely maxed out or did you still have room for improvement? 3 oz per sqft is like 3lb per light if using hps
Click to expand...
Knowing what I know now definitely coulda done more. 48 plants x 20.5 = 984

For one thing I coulda made a cover for the tray, used net pots and put the other plants in but I was using 6 inch square pots with hydroton and that plus the tray fit limited me, I did use true inside 4x8 trays.

I did have Co2. I knew a lot about growing but nothing like what I know now with many more years under my belt and another state with a different climate.
 
H

HashBucket

Well-Known Member
Renfro said:
and another state with a different climate.
Click to expand...
It is amazing how much of a difference that makes.

Where I live is many micro-climates. Can drive for a half hour and end up in a completely different weather.
And, that makes a big difference ... even indoors
 
S

SamWE19

Well-Known Member
If a seed grows side branches almost vertically and produces a massive stick of bud will a clone continue the same angle of side branch or is it likely to be different?

Got a couple of seeds starting the flowering stretch now that are doing this and I think may end up being a bloody good sog strain for bulky colas
 
dakindgrind

dakindgrind

Well-Known Member
@hybridway2
hybridway2 said:
Its not that bad. I come from below in pull allot through, making sure not to pop off buds. Sometimes cut from top then bottom.
120 site Sleazy-Cloner @60 cuts per clone will allow bigger/taller clones & spit out a tray every 10 days. Can re-use water in it for quite awhile using ClearRez once every 10-14 days. Just simple Clone-X
Click to expand...

Make $2200 worth of "Clear Rez" for $4 !!!

That is correct. Same EXACT ingredient as EZ Clone Clear Rez that sells for $20 a QT. Get your self a 1 lb bag of HTH Pool shock non PH buffered available online and most hardware stores (bought mine from Ace). Mix 1 GRAM (450 in the bag) per gallon of solution. Will make the SAME EXACT...
www.rollitup.org

Used to use clear rez but have been using HTC shock 'n swim for years, 1 g Ca(CL2) : 1gal H2O for same liquid app rate as CR.
 
Renfro

Renfro

Well-Known Member
SamWE19 said:
If a seed grows side branches almost vertically and produces a massive stick of bud will a clone continue the same angle of side branch or is it likely to be different?

Got a couple of seeds starting the flowering stretch now that are doing this and I think may end up being a bloody good sog strain for bulky colas
Click to expand...
Pics?

Strains that grow more straight up end up blocking themselves and the nodes that aren't the tallest suffer from lack of light. Those strains need to be spread out with a trellis so each branch gets it's own area and taller branches can be made to grow laterally instead of upwards to produce an even canopy. Personally I want each branch / cola to have an area thats about 5 x 5 to 6 x 6 inches.
 
S

SamWE19

Well-Known Member
Renfro said:
Pics?

Strains that grow more straight up end up blocking themselves and the nodes that aren't the tallest suffer from lack of light. Those strains need to be spread out with a trellis so each branch gets it's own area and taller branches can be made to grow laterally instead of upwards to produce an even canopy. Personally I want each branch / cola to have an area thats about 5 x 5 to 6 x 6 inches.
Click to expand...
Defoliated today to give them some extra light
 

Attachments

H

HashBucket

Well-Known Member
rustyshaclkferd said:
If you want or need help, commercial help, get off the forum... no offense to Rollitup but i doubt many people here operate industrial grows putting out a quality product at an afforbale price for their market and that are profitable and at lowest possibles cost...


If you want help DM me
Click to expand...
I just saw this ... and wish I'd seen it sooner.
You are right.
There are no professional, commercial growers here ... well, maybe a couple, but mostly kids growing a couple or ten plants in their bathtub ....

I came here looking for pro's.
Besides your offer to DM (generous of you, and thanks) do you know of any forums where people talk more about our craft than politics, religion or sex.
Where?
 
You must log in or register to reply here.
Top