Sedan
Well-Known Member
Production of the Grow bed and SDU (stationary drainage installation)I look forward to seeing your innovations at work.
for the tent Mars Hydro with dimensions 1m X 1m.
Table dimensions: 0.8m X 0.8m. Height 0.8m.
The volume of the basket in the grow bed: 0.6m X 0.6m X 0.3m
Materials:
timber, board.
fasteners: steel corners, tin brackets for drywall constructions, 20 mm screws.
Basket: 2mm thick galvanized wire mesh
Pallet: cellular polycarbonate.
Matte white paint.
The cost of all materials: $ 18
![1.PNG](/data/attachments/3494/3494990-8e53e18317b3d081aa2aa4ac69efc51d.jpg)
I intentionally made the table larger than the basket so that the basket was deeper and water did not spill over the edge of the pallet.
![2.PNG](/data/attachments/3494/3494991-de3641c97e6038aecdae93b31f76c939.jpg)
Also, the second belt, connected by steel corners, the inner gives structural rigidity
![4.PNG](/data/attachments/3494/3494992-6bdc84d330b82c133cda0257b302eebc.jpg)
the lower side jumpers are made slightly inclined forward, in order to mount a pallet with a slope on them.
![3.PNG](/data/attachments/3494/3494993-509f91dc84e0f2831a368e4e590ec385.jpg)
A pallet is a piece of polycarbonate that fits with slots for legs
![5.PNG](/data/attachments/3494/3494994-4b5ae6de313b7b5aacd12e24dcd9966c.jpg)
and bends down a bit to create a kind of gutter.
![6.PNG](/data/attachments/3494/3494995-8f7566525f42c42a95d025ce55b2cc2c.jpg)
The basket for the grow bed is secured by a canopy to the tin brackets.
![8.PNG](/data/attachments/3494/3494997-71c235af0fa469715b97aeb7cc0e3e33.jpg)
water flows down the gutter at one point.
![7.PNG](/data/attachments/3494/3494998-386b6693882302bfb7738221b24511b4.jpg)
There is nothing to be wise - you can’t imagine any easier!
![9.jpg](/data/attachments/3494/3494999-9705274e37d8b67292a36d83d529a007.jpg)