EndlessPossibilities
Member
![Screenshot_20190828-003934_Chrome.jpg](/data/attachments/3488/3488455-ff841b5b0771b934ccb6f2a61e9ab4ee.jpg)
![Very Happy :grin: :grin:](/styles/smilies/icon_biggrin.gif)
I was thinking that too could I put the carbon filter up in the storage area as well? or would it not work as well?Get a good fan. Put in in the top left side of top storage and filter in top of flower chamber with a bit of duct or rigid 90degree plastic bend to connect them. Obviously you need to cut a hole.
I would consider good LEDs for both lighting options personally.
A HLG135w in the flower chamber.
A HLG65 in the veg chamber.
Vent the veg to the flower and the storage above veg (for drying) to the flower with PC fans but put light traps over them so you don't get light leaks.
Yes! If you cut a hole in the top of the flower area you can put a carbon filter in the storage area and just filter it through the hole, A 4inch setup should be fine for that size of space!I was thinking that too could I put the carbon filter up in the storage area as well? or would it not work as well?
Also i have never made a light trap before can I ask how that is done?
I have a 4inch ac infiniti fan i can throw in there and already have an hlg 65
Yeah you could, but if you do that you may as well cut out that section that is the roof of the flower chamber, sit the fan on right side of top storage , so that flower chamber is like a upside down L shape. That will mean no more extra resistance.I was thinking that too could I put the carbon filter up in the storage area as well? or would it not work as well?
Also i have never made a light trap before can I ask how that is done?
I have a 4inch ac infiniti fan i can throw in there and already have an hlg 65
Ok what do you think about if I turned the top right storage into Veg and them used the bottom space as Storage. That way I can have a hole at the bottom of the flower for cool air and vent out into the veg as high up as possible?The diagram shows you pulling air through the veg into the flower area. I think the Rh in the flower side is going to be hard to control. Maybe reverse the flow. From flower into veg.
Get a good fan. Put in in the top left side of top storage and filter in top of flower chamber with a bit of duct or rigid 90degree plastic bend to connect them. Obviously you need to cut a hole.
I would consider good LEDs for both lighting options personally.
A HLG135w in the flower chamber.
A HLG65 in the veg chamber.
Vent the veg to the flower and the storage above veg (for drying) to the flower with PC fans but put light traps over them so you don't get light leaks.
I would use the hooks provided and a bit of chain, you can shorten it with a tie wrap that way.Can I ask how you think the best way to hang the HLG 65 in that chamber would be? I thought about ratchet hangers but that would take up a lot of the space i have in there.