That is why god made duct tape...Red GreeneIt’s a hps 600 watt and I’m just waiting for my rope ratchets to be delivered so I can hang the carbon filter up. Also was wondering, the grow tent has small tears on the inside of the reflective covering, the lights are on and outside the tent is dark I can see loads of light leaks, are threse going to affect my plants during flowering? Also will odour leave the tent through these holes? If I get a second carbon filter would that stop odour escaping.
I raised my light a bit to avoid the heat stress.
yeah take care of them with duct tape, or even better the silver TUCK TAPE, and yes if there are light leaks there will be smell escaping for sure.It’s a hps 600 watt and I’m just waiting for my rope ratchets to be delivered so I can hang the carbon filter up. Also was wondering, the grow tent has small tears on the inside of the reflective covering, the lights are on and outside the tent is dark I can see loads of light leaks, are threse going to affect my plants during flowering? Also will odour leave the tent through these holes? If I get a second carbon filter would that stop odour escaping.
I raised my light a bit to avoid the heat stress.
If I got a second carbon filter would that stop air escaping and instead become suction holes?yeah take care of them with duct tape, or even better the silver TUCK TAPE, and yes if there are light leaks there will be smell escaping for sure.
Possibly but it would require an insane amount of air in a vacuum to create a negative pressure zone inside a grow tent, but I also don't know how that would affect your plants could be bad , could be good , could do nothing at all, i would just use what you have to go on, and seal the holes, but if you added another filter it wouldn't be bad at all, it would stop smell , depends how much air is escaping from your tentIf I got a second carbon filter would that stop air escaping and instead become suction holes?
I need my tent to be totally smell proof I’m in a block of flats where my neighbors have phoned the police on me for just smoking weed. Would could I expect my yield to be? I have two 600 watt hps and I’m using a coco/clay pebble mix with bio grow and I have bio bloom and I was given a sample of some stuff called gen 200, are the bio bizz boosters really neccessary? What ones are the best?Possibly but it would require an insane amount of air in a vacuum to create a negative pressure zone inside a grow tent, but I also don't know how that would affect your plants could be bad , could be good , could do nothing at all, i would just use what you have to go on, and seal the holes, but if you added another filter it wouldn't be bad at all, it would stop smell , depends how much air is escaping from your tent
nutes are always good to use when needed and backed off when needed. I would honestly test it out, every plant reacts to nutes differently
It's fairly hard to guess what you will get but the rule of thumb is around a 1:1 ratio. This formula allows you to calculate your yield relative to your total light power. To calculate, simply divide your dry weight by your lamp wattage.
Formula: Total dried product weight ÷ Total lamp wattage = Yield per watt of light
For example, if you’re using two 600W lamps (1200W total) and produced 1,020 grams of dry product, your calculation would be 1020g/1200W = 0.85g/W.
This formula allows you to measure your yield relative to your lamp strength and can account for energy efficiency (or inefficiency) for different lighting sources. For example, if you’re using “energy efficient” LEDs that produce low yield, they are not actually efficient.
No I meant when I harvest dry it in the tent and at the same time see my guy for some more cuttings. Was wondering if the light will affect the buds drying in the tent. Also I’ve attached a pic of the light leaks I was talkin about and I’ve added another fan in the room to help air circulation a bit.Yes guano is good, honestly I recommend using what's available to you at a good price, most brands have very similar formulations, i personally just use a compost nute rich mix I make myself I don't buy anything, but you can clone, but be careful going from flower to veg can stress it out, and can eventually lead to hermies but it can be done. 2 carbon filters if sealed properly should cut almost all the smell out. I think you're good there.
Cover those light leaks with tape, easy pee zee, but I wouldn't be drying and growing in the same tent, the light itself does degrade thc small amount of light exposure isn't horrible but a lot will hurt your nugs, I always dry in a dark warm room with lots of airflows. It might not be a lot of degradation but I don't take chances when I grow cannabis, well not crazy ones anyway.No I meant when I harvest dry it in the tent and at the same time see my guy for some more cuttings. Was wondering if the light will affect the buds drying in the tent. Also I’ve attached a pic of the light leaks I was talkin about and I’ve added another fan in the room to help air circulation a bit.