Bubble Hash from Moldy Buds

[ilovetoskiatalta]

I have read that it is ok to make hash out of moldy buds.

https://www.cannabisculture.com/con...and-answers-powdery-mildew-infested-medicine/

Anyone have experience with using moldy buds?

 

[Herb & Suds]

Just toss
Not right to even try

That article is about PM not mold

 

[macsnax]

I agree that it may not work out. But if you feel like putting the effort in, give it a shot. If the bubble molds up toss it, if not you should be good. Give it enough time to mold to make sure before you smoke it

 

[hotrodharley]

Toss it.

 

[Renfro]

https://skunkpharmresearch.com/salvaging-moldy-material-2/

I have never bothered trying to save moldy bud, but that article explains how to filter out spores.

 

[Renfro]

If the mold strain produces aflatoxins then you can't filter those out. "The aflatoxins will fluoresce green under the blacklight and any residual solvent will fluoresce blue."

 

[thumper60]

I have read that it is ok to make hash out of moldy buds.

https://www.cannabisculture.com/con...and-answers-powdery-mildew-infested-medicine/

Anyone have experience with using moldy buds?

skip the hash rso for the win.

 

[xtsho]

Trash can

It's not worth it. Some molds can cause serious health problems.

 

[too larry]

I could see trying rso if you had lots of it. But last year when I lost 2/3rds of my crop to rot, anything that looked nasty got tossed. Everything that did get saved got a good H2O2 wash. Some got washed twice.

 

[Apical Bud]

Wait, is it the spores that we're worried about or the toxins that the mold produced? If it were just a matter of spores, putting the bud in the oven at 250 for a half hour would be enough. But I think it's the toxins that mold produces that can make people feel sick even if they don't get a lung infection from live spores. But if you can wash those toxins away during your washing and filtration process maybe you can salvage resin glands?

 

[Renfro]

Wait, is it the spores that we're worried about or the toxins that the mold produced?

Both. If the spores can be filtered out that eliminates one problem, if the mold didn't make an aflatoxin then you are good to go with filtration to remove spores. If there is aflatoxin present I am not familiar with a chemical process to separate it.

 

[Nizza]

you could make a topical cream with the material

 

[promedz]

second mold post on riu this morning! throw the shit out clean room start again! get more fans and work on your intake/outtake! my room gets to 80 humidity ive never seen mold!

 

[waterproof808]

Garbage in, Garbage out....

 

[ilovetoskiatalta]

second mold post on riu this morning! throw the shit out clean room start again! get more fans and work on your intake/outtake! my room gets to 80 humidity ive never seen mold!

They got moldy in the jars, I put them in too soon. They were actually quite dense.

 

[waterproof808]

Wait, is it the spores that we're worried about or the toxins that the mold produced? If it were just a matter of spores, putting the bud in the oven at 250 for a half hour would be enough. But I think it's the toxins that mold produces that can make people feel sick even if they don't get a lung infection from live spores. But if you can wash those toxins away during your washing and filtration process maybe you can salvage resin glands?

Spores are mostly just allergens unless they produce mycotoxins. Even with no mycotoxins present the spores can be a problem for immunocompromised patients.
In terms of flavor and smell, you are past the point of no return and nothing will bring that back and making bubble hash is going to magnify the shittyness of it all. You can try distillate or bho with the proper setups but please don't blow yourself up if you don't know what the fuck you are doing. I'd just write it off as a loss and learning experience.

 

[rkymtnman]

They got moldy in the jars, I put them in too soon. They were actually quite dense.

i found a jar 2 days ago that i didn't put in my normal curing area and it had a bit of that same spiderweb mold from not burping /too much moisture.

i soaked it all in h2o2, all the white stuff floated to the top, scooped it off and am gonna try a run in the washing machine and see what happens. i'll do it after i run a batch of good stuff in case it turns out to be shite.

did you end up running yours?

 

[macsnax]

i found a jar 2 days ago that i didn't put in my normal curing area and it had a bit of that same spiderweb mold from not burping /too much moisture.

i soaked it all in h2o2, all the white stuff floated to the top, scooped it off and am gonna try a run in the washing machine and see what happens. i'll do it after i run a batch of good stuff in case it turns out to be shite.

did you end up running yours?

You're gonna poison yourself Rocky!!!! Lol, post your it goes buddy.

 

[rkymtnman]

You're gonna poison yourself Rocky!!!! Lol, post your it goes buddy.

oh, i'm gonna check what's in the bubble bags with a USB scope. if i see anything strange, i'm gonna chuck it. just sucks, it's a gallon container that somehow i missed burping. luckily i have 5 more that are fine.

 

[macsnax]

oh, i'm gonna check what's in the bubble bags with a USB scope. if i see anything strange, i'm gonna chuck it. just sucks, it's a gallon container that somehow i missed burping. luckily i have 5 more that are fine.

I know man, I was busting your balls because someone hadn't chimmed in yet about the dangers. A lot of people don't understand that something can be done if it hasn't gone too far.