Anyone have a Fluence VYPR
- Thread starter IFARTED
- Start date
Airwalker16
Well-Known Member
Use the search.
that coming from you, the master in useless, redundant questions, simply amazing.
OLD MOTHER SATIVA
Well-Known Member
>he has been trying hard lately he deserves credit
OLD MOTHER SATIVA
Well-Known Member
you "tried" to use the search?
IFARTED
Well-Known Member
Yes
yes
Airwalker16
Well-Known Member
You really need to fuck off, you twat
I DONT have a fluence and if he WANTS SOME THREADS on it, it'd only make sense to use the SEARCH.
It's pathetic you literally pounce on any opportunity to slam someone. Even if it doesn't make sense.
You're such a fuckin Incel, Seth.
check all of the threads you started that ends with a question mark, at least 80% could have been solved by just using the SEARCH
sounds familiar?
Airwalker16
Well-Known Member
The amount of frustration you feel from someone asking for an answer to a question you deem unworthy is really beyond me...
have you re-read some of you older threads? try it, it's fun
IFARTED
Well-Known Member
No need for fighting. I did the obvious search before I asked in my own thread not many threads out there and the ones that were I asked but they were so old the users haven’t been active to let me know their opinions. So being there were little no threads and none recent I figured I would make a thread. I’m guessing most are not using them as they are higher end lights but before i drop that kinda change I wanted some opinions of Seth has problems then he has problems and i leave him be but he could have handled himself a bit better. Let’s all smoke and be happy
PSUAGRO.
Well-Known Member
your $$$$ is good with a fluence product imo.........tested extensively in the commercial sector, can also look at gavita led for a fixed spec solution. without certs your world opens to many options including DIY
good luck
Airwalker16
Well-Known Member
Fuuuuuuck that noise what a waste of money.
Buy a cutter version of the hlg550 which is even better a design BY FAR and it's less than $700. Shit, barely over $600.
https://www.cutter.com.au/product-category/diy-led-kits/horticulture-lighting/sol-skin/
Literally the best deal for a fixture you can buy and will give you the same if not BETTER of a spread than a fluence ever could.
Screwdrivers all you'll need.
you do realize that you just compaired a diy kit without a frame with an out of the box product? you need more than a screwdriver to build this up (as it is in the description in your link: "If you can a use a Drill and a screwdriver your (sic!) good to go"). why are you always so sloppy when you advice products you haven't used on your own?
Airwalker16
Well-Known Member
Jesus Christ....
Wrong link my Bad
https://www.cutter.com.au/product/ssk-550-kit/
And you're wrong....
Included t slot for frame and only requires a Philips head screwdriver as are both CLEARLY STATED in the description.
Seriously Seth... Stop fucking @'ing me and replying to me and ignore me already.
so i'm wrong because you posted the wrong link? work exactly and post only stuff coming from knowledge instead of hear say and i won't need to correct you ALL THE TIME.