My attic grow room construction

cain129

Well-Known Member
No, not yet. I might get 4-6 ounces off the first cycle. Then maybe 2-3 after that. I'm still getting my system down. Trying to see if topping or not topping is the way to go with my setup, I think topping so far.
Either that or tie them down. I would compare 3 of the same strains doing a top, non top, and a tie down. That way you can compare how an untopped plant with no growth stunting or stress from topping to a tied and trained plant with no stress or stunting and apply that to the topped comparison.

I think I'm going to do a SCROG also in the corner.
 

SOG

Well-Known Member
i know what your going through bra ;-)
it pays off at the end, way go thinking out the box :clap::clap::clap:




:joint::peace:
 

cain129

Well-Known Member
Thanks man. And no, but I'll check out your thread. I wish I had a place to grow outside here. It's just too developed where I am at.


Well, I would have 2 fans. One for the light, and one for the room itself. I was running my main room exhaust fan too much. It was sucking the cool air out of the room before it had time to cool the room. But that was just my situation. You post any pics yet of the room?
All I can say now is, you told me so.
 

bryant228

Well-Known Member
All I can say now is, you told me so.
LOL, well I can't say that. My brothers setup just uses one fan. But he doesn't have a 1000watter though. He just has a 600watt hps. And his ballest is seperate from his light. Those ballasts put off some heat as well. His is about 10 years old and you couldn't touch it after it was on for 10 hours. He puts a fan directly on it to help cool it and keeps it out side his flower room. But the ballast I have is magnetic and It stays just alittle warm. How hot does your ballast get after it's been on for awhile?
 

bryant228

Well-Known Member
i know what your going through bra ;-)
it pays off at the end, way go thinking out the box :clap::clap::clap:




:joint::peace:
Thanks man. The hard part is over now. How are your temps holding up? Mine have been fine so far. Which makes me feel better. I had a good time going back and reading all the posts that said it couldn't be done. At least you can use your room for something else other then growing. You might have raised your property value up!
 

bryant228

Well-Known Member
Either that or tie them down. I would compare 3 of the same strains doing a top, non top, and a tie down. That way you can compare how an untopped plant with no growth stunting or stress from topping to a tied and trained plant with no stress or stunting and apply that to the topped comparison.

I think I'm going to do a SCROG also in the corner.
Yeah, i've tied down plants before. I think I might try that with some off the ones that are going in next week. So of the ones that are in there are topped and not topped. The topped ones seem to be getting more weight then the non topped ones.
 

cain129

Well-Known Member
LOL, well I can't say that. My brothers setup just uses one fan. But he doesn't have a 1000watter though. He just has a 600watt hps. And his ballest is seperate from his light. Those ballasts put off some heat as well. His is about 10 years old and you couldn't touch it after it was on for 10 hours. He puts a fan directly on it to help cool it and keeps it out side his flower room. But the ballast I have is magnetic and It stays just alittle warm. How hot does your ballast get after it's been on for awhile?
It's interesting about the heat that is given off by the light I have. The case is made of some type of hard composite that doesn't really conduct heat very well. The glass is really the only thing that gets hot, but even then you can touch with the back of you hand for a few seconds with the fan on. The ballast I know gets super hot but because its in the case it's hard to judge.

I will be ordering all of my prorogation/cloning materials from the horticulture source so I'm going to order a plug in variable speed switch and cut the fan speed in half.

Like you said, I'm just going to take it step by step and get it right. Cheers!

HAPPY FOURTH OF JULY!
 

bryant228

Well-Known Member
i have installed a dedicated AC unit for the room,
its currently holding 74 with no issues so far




:joint::peace:
Nice. I was able to tap into the main house hvac. I just have to keep the house alittle cooler then usual. Can't wait to get my electric bill.

It's interesting about the heat that is given off by the light I have. The case is made of some type of hard composite that doesn't really conduct heat very well. The glass is really the only thing that gets hot, but even then you can touch with the back of you hand for a few seconds with the fan on. The ballast I know gets super hot but because its in the case it's hard to judge.

I will be ordering all of my prorogation/cloning materials from the horticulture source so I'm going to order a plug in variable speed switch and cut the fan speed in half.

Like you said, I'm just going to take it step by step and get it right. Cheers!

HAPPY FOURTH OF JULY!
Sounds good man. LOL, just like everything, it's all trial and error. And I've had my fair share. It doesnt matter how well you plan sometimes.

Have a good 4th! We get to install hardwood flooring this weekend! And I totaly have no ambition to do it :wall:
 

Hulk Nugs

Well-Known Member
Hey man long time no seee .... hows everything going on your end???

If you get a chance throw up a update on how the rooms are looking i would really like to see how its all going up there and if you made anychanges to make it better.
 

bryant228

Well-Known Member
Wow, can't believe I haven't posted in 9 years. I was feeling nostalgic, so I went back and re-read my journal. Long story short, kept the garden going for 5 years. It was a lifesaver during the recession. Had to stop in 2014; my daughter was born. Sorry for leaving so abruptly, but the "growers paranoia" set in.

We're selling the house soon, so looking to do a small little grow before it gets ripped down. And wow, things have definitely changed since I stopped growing. Im glad this great community is still here.
 

Natethenewb

Active Member
I know your post is 4 years old, but thanks man. Let me see if I can find some pics. I had shit dialed in tight after 1 year.
Just came across this, looks phenomenal don't think I'd change a thing lol.
The wife and I just started our Endeavour together hopefully we can build something like this in the future :). Congrats on the baby . my 2 (3,5) are keeping me plenty busy lol.
 
Top