QB96 Elite V2 w/ SSTX heatsink question

Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).

Just finishing up grow with the 288 array above - 776w at the wall:

Big “diesel” (back left) and haze (back right) lowers not yet harvested:

0E60684C-C254-425E-9DE7-EE8D0A7B5FAD.jpeg

Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75

Total so far: 1374g/49.1oz/3.1lbs

Still to go:
FC126B46-C9C6-43E0-B3F4-E845CE4F74BC.jpeg
 
Last edited:
Indoorpro said:
How long you veg those for?
Click to expand...

I don’t keep log book, just track on these threads. Specific info is somewhere on the grow thread, but something close to this:

Seed to 6 nodes/1st topping - 30 days
3 toppings for 8 mains - 21-30 days
Vertical to 12:12 ht -14-28 days

Dug up some info on this grow:
1st topping for 2 mains - July 1
3rd topping for 8 mains - July 18
12-12 (delayed 10-14 days by previous grow) - August 25.

So, 56 days 1st topping to 12:12.

Today is day 92 of flowering, approx 178 days seed to today for long flowering sativas...i’m looking forward to this grow being over...288 vs 96 smackdown will be with shorter flowering strains....hopefully!
 
Last edited:
Or_Gro said:
Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).

Just finishing up grow with the 288 array above - 776w at the wall:

Big “diesel” (back left) and haze (back right) lowers not yet harvested:

View attachment 4237968

Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75

Total so far: 1374g/49.1oz/3.1lbs

Still to go:
View attachment 4237969
Click to expand...

Thinking should be around 4lbs once done?
 
Or_Gro said:
3.5-4.0...pfamazin!

How’d yours go, got a vid comin out?
Click to expand...

No harvest video. Did post a video of the next grow coming up. Been drying in the garage. Need to start trimming it up, getting buds off and curing. I don’t plan on doing a real trim but more of a quick trim to get the crap off that I won’t even really use. I’ve been trying to read if curing untrimmed bud is ok.
 
WeedSexWeightsShakes said:
No harvest video. Did post a video of the next grow coming up. Been drying in the garage. Need to start trimming it up, getting buds off and curing. I don’t plan on doing a real trim but more of a quick trim to get the crap off that I won’t even really use. I’ve been trying to read if curing untrimmed bud is ok.
Click to expand...

I think you want to get any green without trichs off...imo, the more green off the better the cure, but at some point, you start taking off too much sugar...especially if you’re not concentrating the trim...
 
Or_Gro said:
Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).

Just finishing up grow with the 288 array above - 776w at the wall:

Big “diesel” (back left) and haze (back right) lowers not yet harvested:

View attachment 4237968

Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75

Total so far: 1374g/49.1oz/3.1lbs

Still to go:
View attachment 4237969
Click to expand...
Dry weight???
Nice grow.
 
Quick dumb question. The 22" spacing for the 2 Qb 96's, is that center to center or edge of heatsink to edge of heatsink. Probably will be going back to hodepo in a minute. Smh I already cut the damn alu angle,most likely too short.
Cut it at 26.5" and didn't think about it until AFTER it was cut.
 
Or_Gro said:
I’ve posted several sets of pics for two currently flowering grows. Both guys are experienced growers, they think the 96s cause the plants to mature faster, speeding up flowering by a week or so.

Day 54 of 8-10 wk strain, Flush begins tonight.
View attachment 4237817 View attachment 4237818

Colas from other grow @ 6 wks:
View attachment 4237824 View attachment 4237825


Anyone else flowering under them, have a view?
Click to expand...

Here’s the pic that goes with the second grow bud pics @ 6 wks:
98F3EDB4-9F06-4F15-8251-205DA5DF181E.jpeg
DA65BA19-E278-400B-9D45-11E5BEB6C22A.jpeg
6E617B9E-F3B5-4A2C-A2EF-BD0DE1F64203.jpeg
White Sharks
 
Last edited:
CoB_nUt said:
Quick dumb question. The 22" spacing for the 2 Qb 96's, is that center to center or edge of heatsink to edge of heatsink. Probably will be going back to hodepo in a minute. Smh I already cut the damn alu angle,most likely too short.
Cut it at 26.5" and didn't think about it until AFTER it was cut.
Click to expand...

Edge to edge...play with 18-22”..,
 
You must log in or register to reply here.
Back
Top